Recoil tangless insert (SUS304)

Brand :

RECOIL

Caution

To place an order, please refer to the "Catalog Product Number: MISUMI Part Number Comparison Table" in the product information and use the MISUMI part number.

Product Description

[Features]
·The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.
·Dedicated tools enable the insertion and extraction without tangs.
·Extraction will not damage the male threads nor the product.
·You don't have to tear off the tang, look for the broken tang, or check the gauge.

Specifications Table

Diameter	Length	Part number	Pre-insertion outer diameter	Compatible Drill Diameter
M2.5 x 0.45	1D	2TNM-M2.5-0.45X1D	3.20 to 3.70	2.6
	1.5D	2TNM-M2.5-0.45X1.5D
	2D	2TNM-M2.5-0.45X2D
	2.5D	TL05255
	3D	TL05256
M3-0.50	1D	2TNM-M3-0.5X1D	3.70 to 4.35	3.1
	1.5D	2TNM-M3-0.5X1.5D
	2D	2TNM-M3-0.5X2D
	2.5D	TL05035
	3D	TL05036
M4-0.70	1D	2TNM-M4-0.7X1D	5.05 to 5.60	4.2
	1.5D	2TNM-M4-0.7X1.5D
	2D	2TNM-M4-0.7X2D
	2.5D	TL05045
	3D	TL05046
M5 x 0.80	1D	2TNM-M5-0.8X1D	6.25 to 6.80	5.2
	1.5D	2TNM-M5-0.8X1.5D
	2D	2TNM-M5-0.8X2D
	2.5D	TL05055
	3D	TL05056
M6-1.00	1D	2TNM-M6-1.0X1D	7.40 to 7.95	6.3
	1.5D	2TNM-M6-1.0X1.5D
	2D	2TNM-M6-1.0X2D
	2.5D	TL05065
	3D	TL05066
M8-1.25	1D	2TNM-M8-1.25X1D	9.80 to 10.35	8.4
	1.5D	2TNM-M8-1.25X1.5D
	2D	2TNM-M8-1.25X2D
	2.5D	TL05085
	3D	TL05086
M10-1.50	1D	2TNM-M10-1.5X1D	11.95 to 12.50	10.5
	1.5D	2TNM-M10-1.5X1.5D
	2D	2TNM-M10-1.5X2D
	2.5D	TL05105
	3D	TL05106
M12-1.75	1D	2TNM-M12-1.75X1D	14.30 to 15.00	12.5
	1.5D	2TNM-M12-1.75X1.5D
	2D	2TNM-M12-1.75X2D