Air Dryer Freeze Model Standard Input Air Model

Air Dryer Freeze Model Standard Input Air Model

· Tube-in-tube heat exchanger and capacity regulating valve are used together with a hot gas pipe cooling temperature adjustment system to enable pressure dew-point of 4°C.
· Uses R -134a which does not cause any ozone depletion (NH-8007N, 8012N, 8018N, and 8028N).


Japanese Only

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipRoHSApplication Entrance processing flow rate (50Hz/60Hz)
Entrance Flow Rate [Distinction]
Air Compressor Size
Body Material Supply Side, Plumbing Thread Nominal Control Side, Plumbing Thread Nominal Applicable Fluids Operating Pressure
Details of Air Temperature at the Inlet Port
Ambient Temperature
Entrance processing flow rate details (50Hz/60Hz)
6 Day(s) or more 10Main line4.70 ~ 5.66~1030Metal1 1/21 1/2Air0.14~1.05~602~404.70/5.66
6 Day(s) or more 10Main line6.07 ~ 7.31~1037Metal1 1/21 1/2Air0.14~1.05~602~406.07/7.31


  1. 1

Basic Information

Type Dryer Method Refrigerating type Shape Standard
Outlet Open Air Pressure Dew-point(℃) 10 Supply Side, Connection Type Rc(R) Inlet Air Temperature(℃) 60
Inlet Air Pressure(MPa) 0.7 Control Side, Connection Type Rc(R)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)