Electromagnetic Lock (Unlocked When Turned On) LE-36-DSL
Caution
Product Description
[Features]
· Frame side attachment type electronic lock.
· Slim type with 20 mm thickness.
· Energized unlocking type.
· When used together with a cam lock, the lock can be released with a key in an emergency (power failure, etc.)
· Locking information signal output is possible (no voltage output when the stopper is locked).
· With LED (green).
· Lights up in the unlocked state (when the solenoid is energized).
· Built-in diode for contact protection.
· Can be used on the left and right side (countersinking for mounting on both sides)
Frame-Side-Mounting Type Electric Lock
LE-36-DSL external appearance
Case-side mounting type electric lock. Can be used on left or right side (countersink machining for mounting on each side).
Thin type with a thickness of 20 mm
Energized unlocking type. By using together with a cam lock, it can be unlocked by key during an emergency (power outage, etc.). Can output locking information signal (no voltage output when the stopper plate is locked).
With LED (green). Glows when unlocked (when solenoid is energized).
Built-in diode for contact protection.
Ideal for locking control systems on small boxes such as key boxes and lockers.
- Locking operation
By closing the door, the trigger is pushed and the latch is mechanically locked.
- Unlocking operation
When the solenoid is energized, the latch lock is released and the door can be opened by pulling it forward.
- Rated voltage: 24 V DC ±5%
- Power consumption: approx. 2.2 W (approx. 90 mA)
- Conduction ratio: 100% (continuous rating)
- Switch rating: 30 V DC / 0.1 A (resistive load)
- Materials: aluminum die casting (ADC), cold rolled steel plate (SPCC)
- Ambient operating temperature: -5 to +40°C (no freezing)
- Ambient operating humidity: 85% RH or below (non condensing)
- Mass: 180 g
Solenoid Lock dimensional drawing (mm)
Stopper plate (included) dimensional drawing (mm)
Reference mounting drawing (mm)