Bolt with Rubber
Brand :
KAKUTA
Caution
Product Description
[Features]
- Uses NBR (nitrile rubber).
- Hardness shore 70°.
Drawing
M4 x 13
M4 x 32
M6 x 37
M8 x 50
M10 x 59
M12 x 66
Specifications Table
| - | Thread diameter | full length | Length | Rubber maximum diameter | Rubber seat diameter | Pitch | Material | Accessory |
|---|---|---|---|---|---|---|---|---|
| bolt with rubber M4 x 13 | M4 | 23 | 13 | 12 | 8 | 0.7 | Steel (Steel) | Nut 1 pc. Square nut (Nut) 1 pc. |
| bolt with rubber M4 x 32 | M4 | 42 | 32 | 12 | 8 | 0.7 | Steel (Steel) | Nut 1 pc. Square nut (Nut) 1 pc. |
| bolt with rubber M6 x 37 | M6 | 51 | 37 | 16 | 10 | 1.0 | Steel (Steel) | Nut (Nut) 2 pcs. |
| bolt with rubber M8 x 50 | M8 | 68 | 50 | 19 | 12 | 1.25 | Steel (Steel) | Nut (Nut) 2 pcs. |
| bolt with rubber M10 x 59 | M10 | 85 | 59 | 24 | 16 | 1.5 | Steel (Steel) | Nut (Nut) 2 pcs. |
| bolt with rubber M12 x 66 | M12 | 100 | 66 | 32 | 22 | 1.75 | Steel (Steel) | Nut (Nut) 2 pcs. |
| Specifications | Material NBR (Nitrile rubber)/Hardness Shore 70°/Manufacturing temperature 170℃ to 180℃/Endurance temperature Normal 80℃, High temperature specification 150℃ to 160℃ (Use time approximately 30 minutes) * When using bolts with rubber, the total pressure is absorbed by rubber, so the tightening force is lower than normal bolts. | |||||||
· Only a part of the lineup is available at MISUMI. Please use filtering criteria to confirm details.
Cautions and Prohibitions
Since the tightening force is absorbed by rubber, it is lower than that of normal bolts.
Please note that forcible tightening when using bolts with rubber may lead to malfunction, deformation, or damage to the clamp and cause injury or serious accidents.
The rubber part of the tip cannot be removed. (not a cap type)