[Single-Action Attachment/Release] Wedge Lock Clamper
Caution
- * This button lock clamper is used with the dedicated case.
- QCWE and QCWE-S will be switched sequentially from February 2021 as soon as the current specifications are out of stock.
·Changed the main body ON-OFF printing from printing to laser marking
·Changed the main body material from S45C electroless nickel plating to SUS303
There is no change in materials other than the main body.
Product Description
It is a fastening part, an alternative to bolts, that allows single-action attachment/detachment of attachments and replacement of jigs involving switching equipment models.
It is one of the best product when you want to minimize flapping.
The wedge pushes the ball out and hits the tapered surface inside the case, pulling the plate in.
[Features]
·No tools needed: Anyone can easily tighten it.
·Fixed with single-action: single-action switching between clamp and unclamp.
·Fixed with the same strength no matter who does: It eliminates the variation in tightening force among personnel.
·Easy to see ON/OFF: You can tell at a glance by the direction of the knob whether it is fixed or not.
What is a wedge lock clamper?
When you want to minimize flapping
*This Quarter-Turn Clamp product should be used as a set with the Cam Receptacle.
| Clamping force | 30 N/50 N |
|---|---|
| Width | ⌀25/⌀34 |
| Features | · Clear ON and OFF ・ Also available in all stainless steel |
The wedge pushes the ball out and hits the tapered surface inside the case, pulling the plate in.
Operation method
Operating procedure
*Follow the procedure in reverse to unclamp.
Example of use
Replace star wheel and guide
Replacing attachments for conveyer systems
Product line-up
