Slot Clamp (MBSC)
Brand :
IMAO
Caution
Product Description
Simple. Clamp and unclamp power with bolt operation.
Maximum clamping force. 50kN
Compact. Simple and compact design
[Features]
· With simple and compact design ideal for thin material workpieces.
· MBSC-Afirmly clamps where the workpiece surface is pointed.
· Use MBSC-B type on finishing surfaces, or MBSC-C type
· When unlocking the clamp tip floats up at the O-ring.
Drawing
Product Specification
Only MBSC-C uses button bolts.
| Type | Main body |
|---|---|
| MBSC-A | SKD12 Hardening and Tempering Black oxide coating HRC45 to 48 |
| MBSC-B | SKD12 Hardening and Tempering HRC45 to 48 |
| MBSC-C | Brass (cadmium reducing material) |
Specifications Table
■ MBSC-A (for black skin surface)
| Part number | W | H | Stroke | H1 | L1 | P | Lf | M | W1 | Clamping force (kN) | Allowable tightening torque (N⋅m) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MBSC025A | 9.5 | 1.9 | 0.19 | 3.6 | 9.5 | 3.8 | 7 | M2.5 x 0.45-8L | 2 | 2.8 | 1.8 | 3 |
| MBSC04A | 12.7 | 2.5 | 0.4 | 4.8 | 12.7 | 5.1 | 10 | M4 × 0.7-12L | 3 | 6.6 | 5.6 | 7 |
| MBSC06A | 19.1 | 3.8 | 0.6 | 7.1 | 19.1 | 7.6 | 13 | M6 × 1-16L | 5 | 16 | 22.5 | 21 |
| MBSC10A | 25.4 | 6.4 | 1.2 | 11.4 | 25.4 | 10.2 | 20 | M10 × 1.5-25L | 8 | 17 | 40.6 | 65 |
| MBSC12A | 38.1 | 9.5 | 1.9 | 16.3 | 38.1 | 15.2 | M12 × 1.75-30L | 10 | 50 | 145 | 200 |
■ MBSC–B (for finish surface)
| Part number | W | H | Stroke | H1 | L1 | P | Lf | M | W1 | Clamping force (kN) | Allowable tightening torque (N⋅m) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MBSC025B | 9.5 | 1.9 | 0.19 | 3.6 | 9.5 | 3.8 | 7 | M2.5 x 0.45-8L | 2 | 2.8 | 1.8 | 3 |
| MBSC04B | 12.7 | 2.5 | 0.4 | 4.8 | 12.7 | 5.1 | 10 | M4 × 0.7-12L | 3 | 6.6 | 5.6 | 7 |
| MBSC06B | 19.1 | 3.8 | 0.6 | 7.1 | 19.1 | 7.6 | 13 | M6 × 1-16L | 5 | 16 | 22.5 | 21 |
| MBSC10B | 25.4 | 6.4 | 1.2 | 11.4 | 25.4 | 10.2 | 20 | M10 × 1.5-25L | 8 | 17 | 40.6 | 65 |
| MBSC12B | 38.1 | 9.5 | 1.9 | 16.3 | 38.1 | 15.2 | M12 × 1.75-30L | 10 | 50 | 145 | 200 |
■ MBSC–C (for finish surface)
| Part number | W | H | Stroke | H1 | L1 | P | Lf | M | W1 | Clamping force (kN) | Allowable tightening torque (N⋅m) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MBSC025C | 9.5 | 1.9 | 0.19 | 3.6 | 9.5 | 3.8 | 5 | M2.5 x 0.45-8L | 1.5 | 0.8 | 0.6 | 3 |
| MBSC04C | 12.7 | 2.5 | 0.4 | 4.8 | 12.7 | 5.1 | 10 | M4 × 0.7-12L | 2.5 | 1.7 | 2.8 | 7 |
| MBSC06C | 19.1 | 3.8 | 0.6 | 7.1 | 19.1 | 7.6 | 11 | M6 × 1-16L | 4 | 4.2 | 5.6 | 23 |
Usage Example
1
2
3
Mounting Method
- 1.Perform processing of the groove for the slot clamping.
- 2.Perform tapped hole processing for the hex socket head cap screw.
- 3.Assemble the slot clamping and lightly tighten. In this unclamped state, there is clearance for attaching and detaching the workpiece due to the o-ring.
- 4.Set the workpiece and tighten the hex socket head cap screw.