Base piping 4 GB1, 2, 3R series standalone valve
Caution
- Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.
Product Description
The new 3GB1/2R, 4GB1/2/3R series have inherited the legacy 3G/4G series concept and evolved it further.
[Environmental Performance]
· Continuous power OK (single solenoid type). Uses a new coil actuator.
· Reduced power consumption.
[Safety]
· Manual misoperation prevention (manual device has a protective cover).
· Suppresses malfunctioning problems (metal base, exhaust malfunction prevention valve regardless of resin block come as standard).
· Foreign matter problem prevention
[Reliability]
· Low sliding · Realizes long life
· Improved leave response
[Ease of use]
· Wiring connector horizontal sharing
· Uses rotary connector
Drawing
4GB110R
2-position single grommet lead (no symbol)
E type connector type (E)
Note: Values in ( ) are for AC voltage
EJ type connector type (E**J)
Note: Values in ( ) are for AC voltage
*Please refer to the digital catalog for information on part numbers other than those listed above.
Product Specification
Common specifications
| Items | Details | |
|---|---|---|
| Valve type and operation method | Pilot-operated soft spool valve | |
| Operating fluid | Compressed Air | |
| Maximum operating pressure MPa | 0.7 | |
| Minimum operating pressure MPa | 0.2 (*3) | |
| Pressure resistance MPa | 1.05 | |
| Ambient temperature℃ | -5 to 55 (no freezing) | |
| Fluid temperature°C | 5 to 55 | |
| Manual equipment | Non-lock/lock compatible type (standard) | |
| Pilot exhaust method | Internal pilot | Central exhaust type for main valve and pilot valve |
| External pilot | Individual exhaust type for main valve and pilot valve | |
| Lubrication Note 1 | N/A | |
| Protective Structure Note 2 | Dust-proof | |
| Vibration resistance m/s² | 50 or less | |
| Impact resistance: m/s² | 300 or less | |
| Environment | Cannot be used in a corrosive gas atmosphere | |
Note 1: If lubrication is needed, use turbine oil class 1 ISOVG32. Excessive or intermittent lubrication may cause unstable operation.
Note 2: Use in a manner that prevents exposure to water droplets, oil, etc. For DIN terminal box specifications, the rating is IP65 (jet-proof type).
However, it is required to fix with the specified applicable code outer diameter and tightening torque.
Note 3: When the external pilot (option code: K) is selected, the operating pressure range is 0 to 0.7 MPa. Also, use an external pilot pressure of 0.2 to 0.7 MPa.
Electrical specifications
| Items | Details | ||||||
|---|---|---|---|---|---|---|---|
| Rated voltage V | DC24 | DC12 | DC5 | DC3 | AC100 | AC200 | |
| Voltage fluctuation range | +/- 10% | ||||||
| Retaining current A (Note 1) | Standard | 0.015 (0.017) | 0.030 (0.034) | 0.072 (0.082) | 0.120 (0.136) | 0.009 (0.009) | 0.006 (0.006) |
| With low heat generation and energy-saving circuit | 0.005 | 0.010 | - | - | |||
| Power consumption W (Note 1) | Standard | 0.35 (0.40) | 0.35 (0.40) | - | |||
| With low heat generation and energy-saving circuit | 0.1 | - | - | ||||
| Apparent power VA (note 1) (note 2) | Standard | - | - | 0.93 (0.98) | 1.40 | ||
| Heat-resistant class | B | ||||||
| Surge protector | Option | ||||||
| Indicator | Lamp (option) | ||||||
Note 1: Values in parentheses are for models with lamp. Also, models with low heat generation and power-saving circuits are only available with lamp.
Note 2: The 200 V AC value is for the DIN terminal box with lamp.
Internal Structure
4GB110R
Main Parts List
4GB110R
| Product number | Part name | Material | Product number | Part name | Material |
|---|---|---|---|---|---|
| 1 | Coil assembly | - | 7 | Spool assembly | - |
| 2 | Pilot-operated exhaust check valve | Hydrogenated nitrile rubber | 8 | Plate | Resin |
| 3 | Piston D assembly | - | 9 | Body | Aluminum alloy die-cast |
| 4 | Manual equipment | Resin | 10 | Piston S assembly | - |
| 5 | Piston chamber | Resin | 11 | Cap | Resin |
| 6 | Manual protective cover | Resin | 12 | Single sub-plate | Aluminum alloy die-cast |
*Please refer to the digital catalog for information on part numbers other than those listed above.