• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 10:00 15/12/2019 to 7:00 (MYT) 16/12/2019. We apologize for the inconvenience.

Small Hot Air Generator

Small Hot Air Generator

High-Temperature Fluid Heater
High-temperature heating of gases such as air, up to 800°C. A revolutionary high temperature hot air generator that changes the heating area of gas burners, etc. A safe and clean hot air generator more compact than the conventional products, providing quick temperature rise/fall and excellent responsiveness.
[Features]
· Discharges high temperature in a short time.
· Unlike the conventional hot air generators, the gas generator is separate and the heater is extremely compact.
· Incredibly safe and clean because it does not combust or produce flames.
· Temperature can be adjusted through three factors: voltage, air volume, and distance from workpiece.
· The heat source supports ceramic machining of special elements with quartz glass. A heater with very little heat load has thus been realized.
· Highly heat resistant quartz glass is used for the hot air vent.
· Three types are available to suit the shape and mounting methods of items being heated.
· By combining with a temperature controller, the blowing direction of hot air can be set as desired.
· Non-standard shapes, voltages, and capacities are available, as are irregular shapes.
[Notes]
· Be sure to check ventilation when applying voltage. Never use without ventilation.
· After turning the power to the product off, wait at least 3 minutes before turning off the ventilation for safety. After that, confirm that the temperature of the hot air is 50°C or less and stop the air blow.
· The main body uses quartz glass, so do not apply impacts.
· When using, the main body and case will become hot, so never touch with bare hands. Burns may result.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
800X1S-AH
800X1S-AH2
800X1S-BH
800X1S-BH2
800X1S-CH
800X1S-CH2
Part NumberVolume DiscountDays to ShipRoHSHeater Capacity
(kw)
Power Supply Hot-Air Beam Length G
(mm)
Hot-Air Beam Cover Diameter H
(Ø)
Hot-Air Beam Diameter J
(Ø)
4 Day(s) or more 100.35Single-Phase 100 V57138.5
4 Day(s) or more 100.44Single-Phase 200 V57138.5
4 Day(s) or more 100.35Single-Phase 100 V68132.0
2 Day(s) or more 100.44Single-Phase 200 V68132.0
4 Day(s) or more 100.35Single-Phase 100 V681326
4 Day(s) or more 100.44Single-Phase 200 V681326

Loading...

  1. 1

Basic Information

Type Hot Air Beam Connection Port R1/8

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)