Different Diameter Double Union Y 10-KQ2UD, One-Touch Fitting
Brand :
SMC
Caution
- Please refer to the catalog for detailed specifications and materials.
- Product images may be representative images. Refer to the catalog for details.
Product Description
Metric-size, different-diameter double union Y.
[Features]
· One-touch insertion and removal.
· Can be used in vacuum to -100 kPa.
[Applications]
· Use to connect tubing of reduced size for branching into four tubes in the same direction.
Metric-Size One-Touch Fitting, Different Diameter Double Union Y Specifications
Different Diameter Double Union Y External Appearance
Different Diameter Double Union Y Dimensional Drawing
Different Diameter Double Union Y Dimensional Drawing
| Applicable tubing outer diameter mm | Model | øD1Note) | øD2Note) | L1 | L2 | P | I | M1 | M2 | Q | øO | øN | Effective Area mm2 | Minimum Port Size | Weight g | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (a) | (b) | Urethane | ||||||||||||||
| ø4 | ø6 | 10-KQ2UD04-06A | 8.2 | 10.4 | 29.2 | 18.2 | 8.2 | 16.6 | 13.3 | 13.3 | 6.8 | 6 | 3.2 | 4.2 | 3 | 5.4 |
| ø6 | ø8 | 10-KQ2UD06-08A | 10.4 | 13.2 | 32 | 20.5 | 10.4 | 21 | 13.3 | 14.2 | 8.2 | 6 | 3.2 | 10.6 | 4.5 | 8.1 |
Unit: mm
Note) øD1, øD2represents maximum diameter.
Tube
- Materials: PFA, polyurethane
Note) Can also be used with FEP, nylon and soft nylon. However, the clean performance will decline.
Product color
- Body: white type
- Release button: white
Specifications
| Fluid | Air, waterNote 1) | |
|---|---|---|
| Operating pressure rangeNote 2) | -100 kPa to 1 MPa | |
| Proof pressure (at 23°C) | 3 MPa | |
| Ambient temperature and fluid temperature | -5 to 60°C, Water: 0 to 40°C (No freezing) | |
| Thread | Mounting section | JIS B0203 (Taper thread for piping) JIS B0205 (Metric coarse thread) |
| Nut section | JIS B0205 (Metric fine thread) | |
| Seal on the threads | With or without seal | |
| Grease used | Fluorine-based grease | |
| Cleanliness class (ISO class) | Class 5 | |
Note 1) The surge pressure must be under the maximum operating pressure.
Note 2) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Principal Parts Materials
| Body | C3604 with electroless nickel plating, PBT, PP, SUS 303 |
|---|---|
| Stud | C3604 (thread part) with electroless nickel plating, SUS 303 (thread part) |
| Chuck | SUS 304 |
| Guide | SUS 304 |
| Release button | POM |
| Seal, O-ring | NBR |
| Gasket | SUS 304/NBR |