Bulkhead Connector 10-KQ2E, One-Touch Fitting

Brand :

SMC

Caution

Please refer to the catalog for detailed specifications and materials.
Product images may be representative images. Refer to the catalog for details.

Product Description

Bulkhead connector one-touch fitting.
[Features]
· One-touch insertion and removal.
· Can be used in vacuum to -100 kPa.
[Applications]
· Use to connect a male thread and tubing through a panel, etc.

Inch Size One-Touch Fittings, Bulkhead Connector Specifications

Metric Size

Bulkhead Connector, Metric Size External Appearance

Bulkhead Connector, Metric Size Dimensional Drawing

Applicable Tubing Outer Diameter mm	Connection thread Rc	Model	T (M)	H₁ (Hex size)	H₂ (Hex size)	L₁	L₂	Mounting hole	M	Effective Area mm²	Minimum Port Size	Weight g
Applicable Tubing Outer Diameter mm	Connection thread Rc	Model	T (M)	H₁ (Hex size)	H₂ (Hex size)	L₁	L₂	Mounting hole	M	Urethane	Minimum Port Size	Weight g
ø3.2	1/4	10-KQ2E23-02N	M12 × 1	17	14	28.7	14.3	13	13.3	2.9	2.5	31.2
ø4	1/8	10-KQ2E04-01N	M12 × 1	14	14	24.4	10	13	13.3	4	3	21.2
ø4	1/4	10-KQ2E04-02N	M12 × 1	17	14	29	14.6	13	13.3	4	3	30.9
ø6	1/8	10-KQ2E06-01N	M14 × 1	17	17	23.6	9.2	15	13.3	10.4	4.5	28.9
	1/4	10-KQ2E06-02N	M14 × 1	17	17	28.4	14	15	13.3	10.4	4.5	32.4
	3/8	10-KQ2E06-03N	M14 × 1	19	17	30.7	16.3	15	13.3	10.4	4.5	35.9
ø8	1/8	10-KQ2E08-01N	M16 × 1	17	19	24.1	6.7	17	14.2	18	6	30.5
	1/4	10-KQ2E08-02N	M16 × 1	17	19	28.4	11	17	14.2	18	6	33.1
	3/8	10-KQ2E08-03N	M16 × 1	19	19	31.7	14.3	17	14.2	18	6	37.4

Unit: mm *Refer to manufacturer's catalog for other models.

Tube

Materials: PFA, polyurethane
Note) Can also be used with FEP, nylon and soft nylon. However, the clean performance will decline.

Product color

Body: white type
Release button: white

Specifications

Fluid		Air, water^{Note 1)}
Operating pressure range^{Note 2)}		-100 kPa to 1 MPa
Proof pressure (at 23°C)		3 MPa
Ambient temperature and fluid temperature		-5 to 60°C, Water: 0 to 40°C (No freezing)
Thread	Mounting section	JIS B0203 (Taper thread for piping) JIS B0205 (Metric coarse thread)
Thread	Nut section	JIS B0205 (Metric fine thread)
Seal on the threads		With or without seal
Grease used		Fluorine-based grease
Cleanliness class (ISO class)		Class 5

Note 1) The surge pressure must be under the maximum operating pressure.
Note 2) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.

Principal Parts Materials

Body	C3604 with electroless nickel plating, PBT, PP, SUS 303
Stud	C3604 (thread part) with electroless nickel plating, SUS 303 (thread part)
Chuck	SUS 304
Guide	SUS 304
Release button	POM
Seal, O-ring	NBR
Gasket	SUS 304/NBR

Inch Size

Bulkhead Connector, Inch Size External Appearance

Bulkhead Connector, Inch Size Dimensional Drawing

Applicable Tubing Outer Diameter Inch	Connection thread NPT	Model	T (UNF)	H₁ (Hex size)	H₂ (Hex size)	L₁	L₂	Mounting hole	M	Effective Area mm²	Minimum Port Size	Weight g
Applicable Tubing Outer Diameter Inch	Connection thread NPT	Model	T (UNF)	H₁ (Hex size)	H₂ (Hex size)	L₁	L₂	Mounting hole	M	Urethane	Minimum Port Size	Weight g
ø1/8	1/4	10-KQ2E01-35N	1/2-20 UNF	17.46	17.46	28.7	13.3	13.5	13.3	2.9	2.5	33.3
ø5/32	1/4	10-KQ2E03-35N	1/2-20 UNF	17.46	17.46	29	13.6	13.5	13.3	4	3	33.3
ø3/16	1/8	10-KQ2E05-34N	9/16-18 UNF	17.46	17.46	25.6	9.2	15	13.3	6.5	3.5	36.6
ø1/4	1/4	10-KQ2E07-35N	9/16-18 UNF	17.46	17.46	29.9	13.5	15	13.3	11.5	4.6	38.8
ø5/16	3/8	10-KQ2E09-36N	3/4-16 UNF	22.23	22.23	31	13.6	20	14.2	18	6	61.8
ø3/8	3/8	10-KQ2E11-36N	7/8-14 UNF	25.4	25.4	31.4	12	23	15.6	29.1	7	83.8
ø1/2	3/8	10-KQ2E13-36N	1-12 UNF	28.57	28.57	32	11.6	26	17	51.7	9.6	106.6
ø1/2	1/2	10-KQ2E13-37N	1-12 UNF	28.57	28.57	36.1	15.7	26	17	51.7	9.6	114.3

Unit: mm

Tube

Materials: PFA, polyurethane
Note) Can also be used with FEP, nylon and soft nylon. However, the clean performance will decline.

Product color

Body: white type
Release button: white

Specifications

Fluid		Air, water^{Note 1)}
Operating pressure range^{Note 2)}		-100 kPa to 1 MPa
Proof pressure (at 23°C)		3 MPa
Ambient temperature and fluid temperature		-5 to 60°C, Water: 0 to 40°C (No freezing)
Thread	Mounting section	ANSI/ASME1.20.1 (NPT thread) JIS B0208 (UNF thread)
Thread	Nut section	JIS B0208 (UNF thread)
Seal on the threads		With or without seal
Grease used		Fluorine-based grease
Cleanliness class (ISO class)		Class 5

Note 1) The surge pressure must be under the maximum operating pressure.
Note 2) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.

Principal Parts Materials

Body	C3604 with electroless nickel plating, PBT, PP
Stud	C3604 (thread part) with electroless nickel plating
Chuck	SUS 304
Guide	SUS 304
Release button	POM
Seal, O-ring	NBR
Gasket	SUS 304/NBR

*See the manufacturer's catalog for information on products other than the above.