Bulkhead Male Elbow 10-KQ2LE, One-Touch Fitting
Brand :
SMC
Caution
- Please refer to the catalog for detailed specifications and materials.
- Product images may be representative images. Refer to the catalog for details.
Product Description
One-touch fitting by SMC.
[Features]
· One-touch insertion and removal.
· Can be used in vacuum to -100 kPa.
[Applications]
· Use to connect tubing through a panel, etc. and to change the tube direction by 90°.
Bulkhead Male Elbow: 10-KQ2LE Outline Drawing And Dimensions
Bulkhead Male Elbow: 10-KQ2LE Outline Drawing
(Unit: mm)
| Applicable tubing outer diameter mm | Model | T (M) | H1 (Hex size) | H2 (Hex size) | B | E | øDNote) | Mounting hole | M | Effective Area mm2 | Minimum Port Size | Weight g | With rib |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Urethane | |||||||||||||
| ø4 | 10-KQ2LE04-00N | M12 × 1 | 14 | 14 | 14.8 | 28.5 | 8.2 | 13 | 13.3 | 4.2 | 3 | 21.2 | ● |
| ø6 | 10-KQ2LE06-00N | M14 × 1 | 17 | 17 | 15.5 | 29.6 | 10.4 | 15 | 13.3 | 9 | 4.5 | 29.4 | - |
| ø8 | 10-KQ2LE08-00N | M16 × 1 | 17 | 19 | 17.2 | 32.3 | 13.2 | 17 | 14.2 | 14.9 | 6 | 30.4 | ● |
| ø10 | 10-KQ2LE10-00N | M20 × 1 | 22 | 24 | 19.3 | 37.9 | 15.9 | 21 | 15.6 | 25 | 7.5 | 53.5 | ● |
| ø12 | 10-KQ2LE12-00N | M22 × 1 | 24 | 27 | 21.5 | 40.8 | 18.5 | 23 | 17 | 39.7 | 9 | 61 | ● |
Note) øD1 represents maximum diameter.
Metric Size One-Touch Fittings 10-KQ2 Series Common Specifications (Reference)
Construction
Metric Size One-Touch Fittings 10-KQ2 Series Structural Drawing
Applicable Tubing
| Tubing materialNote) | PFA, polyurethane |
|---|---|
| Tubing outer diameter | ø2, ø3.2, ø4, ø6, ø8, ø10, ø12, ø16 |
Note) Can also be used with FEP, nylon and soft nylon. However, the clean performance will decline.
Product color
| Series | Body | Release button |
|---|---|---|
| 10-KQ2 Series | White type | White |
Specifications
| Fluid | Air, waterNote 1) | |
|---|---|---|
| Operating pressure rangeNote 2) | -100 kPa to 1 MPa | |
| Proof pressure (at 23°C) | 3 MPa | |
| Ambient temperature and fluid temperature | -5 to 60°C, Water: 0 to 40°C (No freezing) | |
| Thread | Mounting section | JIS B0203 (Taper thread for piping) JIS B0205 (Metric coarse thread) |
| Nut section | JIS B0205 (Metric fine thread) | |
| Seal on the threads | With or without seal | |
| Grease used | Fluorine-based grease | |
| Cleanliness class (ISO class) | Class 5 | |
Note 1) The surge pressure must be under the maximum operating pressure.
Note 2) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Principal Parts Materials
| Body | C3604 with electroless nickel plating, PBT, PP, SUS 303 |
|---|---|
| Stud | C3604 (thread part) with electroless nickel plating, SUS 303 (thread part) |
| Chuck | SUS 304 |
| Guide | SUS 304 |
| Release button | POM |
| Seal, O-ring | NBR |
| Gasket | SUS 304/NBR |