Male Connector KPH Clean One-Touch Fitting

Brand :

SMC

Caution

*See the catalog for detailed specs and materials.
Product images may be representative images. Refer to the catalog for details.

Product Description

A one-touch coupling from SMC Corporation.
[Features]
· A one-touch fitting; ideal for blowing type systems in clean rooms.
· Completely oil-free processing. (rubber parts are fluorine coated)
· Liquid-contact areas are non-metallic.
· Parts are cleaned, assembled and double packaged in a clean room.
· Can also be used in vacuums. (-100 kPa)
[Applications]
· Use to connect piping in the same orientation from female threads.

Male Connector KPH Outline Drawing And Dimensions

Male Connector KPH outline drawing

Applicable tube outer diameter mm	Connection thread R	Model	H (width across flats)	L	*A	M	Effective area mm²		Weight g
Applicable tube outer diameter mm	Connection thread R	Model	H (width across flats)	L	*A	M	TPH	TPS	Weight g
4	1/8	KPH04-01	12	24.4	20.5	17	4	4	3
4	1/4	KPH04-02	14	24.4	18.5	17	4	4	4
6	1/8	KPH06-01	14	24.9	21	18.5	10	10	4
8	1/8	KPH08-01	17	31.3	27.5	20.5	26	18	6
8	1/4	KPH08-02	17	29.3	23.5	20.5	26	18	7
10	1/4	KPH10-02	19	36.5	31	23	41	29	10
10	3/8	KPH10-03	19	32	26	23	41	29	11
12	3/8	KPH12-03	22	33	27	24	58	46	12
12	1/2	KPH12-04	22	33.5	26	24	58	46	13

*Reference dimensions after screwing in R thread

Clean One-Touch Fitting For Blowing KP Series Common Specifications

Applicable Tube

Tube materials	PFA, polyolefin soft polyolefin, polyurethane
Tube outer diameter	ø4, ø6, ø8, ø10, ø12

Note 1: FEP, nylon, soft nylon and other non-clean specification tubes can be used, but performance in terms of cleanliness will be reduced.
Note 2: Because polyurethane is a soft material, the tube may break when inserting. Hold the tube at its base and insert securely so that it reaches the back.

Specifications

Cleanliness class (ISO class)	Class 3 ^{Note 1:}
Usable fluids	Air, nitrogen gas, water, deionized water (pure water) ^{Note 2:}
Maximum operating pressure (20°C)	1 MPa ^{Note 3:}
Operating vacuum pressure	-100 kPa {10 Torr}
Guaranteed proof pressure (20°C)	3 MPa
Ambient temperature and working fluid temperature	-20°C to 80°C
Thread	JIS B0203 (tapered thread for pipes/tubes)

Note 1: See the "Particle emissions grade classifications" below.
Note 2: Make sure the surge pressure stays below the maximum operating pressure.
Note 3: The maximum operating pressure is the value at 20°C. For other temperatures, see "Relationship between operating temperature and maximum operating pressure" below.
Note 4: It is not completely airtight, so please avoid use in leak testers, etc., where a vacuum is maintained.

Particle Emissions Grade Classifications

Particle emissions grade classifications graph

Relationship Between Operating Temperature And Maximum Operating Pressure

Operating temperature and maximum operating pressure graph

Model Indication Method

Clean One-Touch Fitting For Blowing KP Series model indication method

Structural Drawing And Components

Clean One-Touch Fitting For Blowing KP Series structural drawing

Number	Part name	Material
1	Body	PP
2	Stud	PP
3	Chuck	SUS304
4	Guide	SUS304
5	Release button	PP (Color: light green)
6	Collet	PP
7	Stopper	SUS304
8	Seal	EPDM (fluorine coating)
9	Bumper	EPDM (fluorine coating)
10	O-ring	EPDM (fluorine coating)
11	Drive bushing	SUS304

Usage Precautions

The KP Series is composed of dedicated one-touch fittings for clean blow and cleaning lines.
Seal material used: Since the durability of EPDM degrades when exposed to mineral oils, it is not suitable for general pneumatic equipment piping.