Piping Module Male Connector Socket KBB
Brand :
SMC
Caution
- *See the catalog for detailed specs and materials.
- Product images may be representative images. Refer to the catalog for details.
Product Description
A one-touch male connector socket fitting.
[Features]
· Allows for centralized and distributed air supply from main pipe lines.
· Allows for centralized or distributed piping for use in different applications.
· Single-action tool-free connection and disconnection.
· Air output in any direction over 360°.
Piping Module KB Series Male Connector Socket Specifications
Male Connector Socket external appearance
Male Connector Socket dimensional drawing
Size
| Model | T Connection threads | H Hex size | D | L1 | L2 | A | Weight g |
|---|---|---|---|---|---|---|---|
| KBB1-M5 | M5 × 0.8 | 8 | 16.8 | 29.5 | 11.5 | 19.0 | 6.0 |
| KBB2-M6 | M6 × 1 | 10 | 21.0 | 23.0 | 5.0 | 12.5 | 6.3 |
| KBB3-R1 | Rc 1/8 | 14 | 28.6 | 27.5 | 6.5 | 16.0 | 11.4 |
| KBB4-R2 | Rc 1/4 | 19 | 30.4 | 31.5 | 9.5 | 19.5 | 24.1 |
Units: mm
Specifications
| Usable fluids | Air | |
|---|---|---|
| Operating pressure range Note: | -100 kPa to 1 MPa | |
| Guaranteed pressure resistance | 3 MPa | |
| Ambient temperature and working fluid temperature | -5 to 60℃ (no freezing) | |
| Thread | Mounting section | JIS B0203 (tapered thread for pipes/tubes) |
| JIS B 0205 (metric coarse thread) | ||
| Nut section | JIS B0205 (metric fine thread) | |
| Screw section seal (standard) | Includes sealing agent | |
| Copper-free specification (standard) | All brass parts have electroless nickel plating | |
Note: Do not use with a leak tester or for other forms of vacuum retention as they are not guaranteed for zero leakage.
Caution
- Do not apply a bend to the piping modules if using them while connected. This could result in deformation or damage of the piping. Also, be sure to use the KBX bracket for connections of 5 stations or more. Failure to use the bracket may cause the piping to become deformed due to bending or deflection.
- Each of the piping modules can be connected to other modules as long as they have the same body size.
- When attaching female connector union and female connector elbow union, use the body's hexagonal surface and tighten with a suitable wrench. Use the root nearest the thread when tightening with a wrench. The hexagonal surface may become damaged if the wrench is not an appropriate size for it.