Female Connector Socket KBS Piping Module KB Series
Caution
- *See the catalog for detailed specs and materials.
- Product images may be representative images. Refer to the catalog for details.
Product Description
A one-touch fitting that allows for centralized and distributed air supply from main pipe lines.
[Features]
· Allows for centralized or distributed piping for use in different applications.
· Single-action tool-free connection and disconnection.
· Air output in any direction over 360°.
Piping Module KB Series Air Supply Port, Female Connector Socket Specifications
Female Connector Socket external appearance
Female Connector Socket dimensional drawing
Size
(Units: mm)
| Model | T Connection threads | H Hex size | D | L1 | L2 | A | Weight g |
|---|---|---|---|---|---|---|---|
| KBS1-R1 | Rc 1/8 | 14 | 13.6 | 28.0 | 11.0 | 25.0 | 17.8 |
| KBS2-R2 | Rc 1/4 | 17 | 17.6 | 33.5 | 14.0 | 30.0 | 28.5 |
| KBS3-R3 | Rc 3/8 | 19 | 25.2 | 38.5 | 17.0 | 34.5 | 33.8 |
| KBS4-R4 | Rc1/2 | 24 | 27.0 | 39.0 | 20.0 | 35.0 | 57.1 |
Specifications
| Usable fluids | Air | |
|---|---|---|
| Operating pressure range Note: | -100 kPa to 1 MPa | |
| Guaranteed pressure resistance | 3 MPa | |
| Ambient temperature and working fluid temperature | -5 to 60℃ (no freezing) | |
| Thread | Mounting section | JIS B0203 (tapered thread for pipes/tubes) |
| JIS B 0205 (metric coarse thread) | ||
| Nut section | JIS B0205 (metric fine thread) | |
| Screw section seal (standard) | Includes sealing agent | |
| Copper-free specification (standard) | All brass parts have electroless nickel plating | |
Note: Do not use with a leak tester or for other forms of vacuum retention as they are not guaranteed for zero leakage.
Main Component Materials
| Body | C3604, PBT, POM |
|---|---|
| Stud | POM |
| Lock ring | POM |
| Spring | SUS304 |
| Spring guide | POM |
| Stopper | POM |
| Thread | C3604 |
| Guide | SUS304, PBT, C3604 |
| Collet, release button | POM |
| Seal, O-ring | NBR |
| Chuck | SUS304 |
Attachment
Attachment method 1: Align the arrows so that they match each other
Attachment method 2: Do not touch the lock ring
Removal method
Removal method 1: Rotate the lock ring 90°. Hold in this position.
Removal method 2: Do not touch the lock ring.
Piping Module Removal/Attachment Structural Drawing
Piping module removal/attachment structural drawing
1. Align the arrows on the piping module's "male side "with those on the "female side "and insert.
2. Insert the lock ring so that the "lock touches the "guide section "on the female side "and falls in the direction shown by the arrow (inside).
3. Push in further so that the lock ring section "passes over "the guide "on the female side "and snaps "into the "window section. The protruding section "on the male side "snaps into the groove on the "female side, "acting as a detent.
To remove, rotate the lock ring 90° to release the lock ring section "from the "window "on the "female side. Pull the female side and "male side "piping modules "to "remove.
*See the manufacturer's catalog for specifications other than the above.