Speed Controller For Low-Speed Operation With One-Touch Fittings (Resin Body), AS-FM Series
Caution
- See catalog for specification details.
- Product images may be representative images. Refer to the catalog for shape details.
Product Description
[Features]
・ Suitable for low speed control of 10 to 50 mm/sec.
・ Starts the work stroke at low speed and the return stroke at high speed.
・ Applicable Tube: Standardized inch size.
[10-Series, Clean Series]
・ It is suitable for clean environment.
・ It prevents dust generation in the cleanroom.
Speed Controller For Low-Speed Operation With One-Touch Fittings (Resin Body), AS-FM Series Specifications
Model
| Elbow type | Universal type | Port size | Applicable tubing outer diameter | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Metric size | Inch Size | ||||||||||||
| 3.2 | 4 | 6 | 8 | 10 | 1/8 " | 5/32 " | 3/16 " | 1/4 " | 5/16 " | 3/8 " | |||
| AS12□1FM-M5 | AS13□1FM-M5 | M5 × 0.8 | ● | ● | ● | - | - | - | - | - | - | - | - |
| AS22□1FM-01 | AS23□1FM-01 | R1/8 | ● | ● | ● | ● | - | - | - | - | - | - | - |
| AS22□1FM-02 | AS23□1FM-02 | R1/4 | - | ● | ● | ● | ● | - | - | - | - | - | - |
| AS12□1FM-U10/32 | AS13□1FM-U10/32 | 10-32UNF | - | - | - | - | - | ● | ● | ● | ● | - | - |
| AS22□1FM-N01 | AS23□1FM-N01 | NPT 1/8 | - | - | - | - | - | ● | ● | ● | ● | ● | - |
| AS22□1FM-N02 | AS23□1FM-N02 | NPT 1/4 | - | - | - | - | - | - | ● | ● | ● | ● | ● |
Specifications
| Usable fluids | Air |
|---|---|
| Proof pressure | 1.5 MPa |
| Max. operating pressure | 1.0 MPa |
| Min. operating pressure | 0.1 MPa |
| Ambient and fluid temperature | -5 to 60℃ (no freezing) |
| Note 1)Applicable tubing material | Nylon, soft nylon, polyurethane |
| Note 2)Option | With seal, round lock nut |
Note 1) Use caution at the max. operating pressure when using soft nylon or polyurethane tubing.
Note 2) M5 and 10-32UNF type ports are not available with seals.
Note 3) All brass components are electroless nickel plated. The lock nut of the meter-out type is zinc chromate plated (the round lock nut is electroless nickel plated). The handle of the M5 type and the lock nut of the meter-in type are black zinc chromate plated.
Flow rate and sonic conductance
| Model | AS12□1FM AS13□1FM | AS22□1FM-□01 AS23□1FM-□01 | AS22□1FM-□02 AS23□1FM-□02 | ||||
|---|---|---|---|---|---|---|---|
| Tube outer diameter | Metric size | ø3.2, ø4, ø6 | ø3.2, ø4 | ø6, ø8 | ø4 | ø6 | ø8, ø10 |
| Inch Size | ø1/8 ", ø5/32 ", ø3/16 " ø1/4 " | ø1/8 ", ø5/32 " | ø3/16 ", ø1/4 " ø5/16 " | ø5/32 " | ø3/16 " | ø1/4 ", ø5/16 " ø3/8 " | |
| Controlled flow | Flow rate L/min (ANR) | 7 | 12 | 38 | |||
| Sonic conductance dm3/(s·bar) | 0.02 | 0.04 | 0.12 | ||||
| Critical pressure ratio | 0.2 | 0.25 | 0.3 | ||||
| Free flow | Flow rate L/min (ANR) | 100 | 180 | 230 | 260 | 390 | 460 |
| Sonic conductance dm3/(s·bar) | 0.3 | 0.54 | 0.7 | 0.8 | 1.2 | 1.4 | |
| Critical pressure ratio | 0.4 | 0.2 | 0.3 | ||||
Note) Flow rate at a pressure of 0.5 MPa and a temperature of 20℃.
Construction: Elbow type
Meter-out type (M5 type / U10/32 type) structural drawing
| No. | Part name | Material | Note | |
|---|---|---|---|---|
| 1 | Body A | PBT | White | |
| 2 | Handle | PBT | BlackNote 1) | |
| 3 | Body B | Brass | Electroless nickel plating | |
| 4 | Needle | Brass | Electroless nickel plating | |
| 5 | Needle guide | Brass | Electroless nickel plating, M5 type only | |
| 6 | Seat ring | Brass | Electroless nickel plating | |
| 7 | Lock nut | SteelNote 2) | Meter-out | Zinc chromate platedNote 3) |
| Meter-in | Black zinc chromate plated | |||
| 8 | U-seal | HNBR | - | |
| 9 | Cassette | - | - | |
| 10 | Seal | NBR | - | |
| 11 | O-ring | NBR | - | |
| 12 | O-ring | NBR | - | |
| 13 | O-ring | NBR | - | |
| 14 | Gasket | NBR / stainless steel | M5 type only | |
Note 1) M5 and U10/32 types are black zinc chromate plated brass.
Note 2) The material of the lock nut option J (round type) is brass. For AS22□1FM only, it is made of steel.
Note 3) The surface treatment of the lock nut option J (round type) is electroless nickel plated.
Meter-in type (M5 type) structural drawing
Meter-in type (U10/32 type) structural drawing
Construction: Universal type
Meter-out type (M5 type / U10/32 type) structural drawing
| No. | Part name | Material | Note | |
|---|---|---|---|---|
| 1 | Body A | PBT | White | |
| 2 | Elbow body | PBT | White | |
| 3 | Handle | PBT | BlackNote 1) | |
| 4 | Body B | Brass | Electroless nickel plating | |
| 5 | Needle | Brass | Electroless nickel plating | |
| 6 | Needle guide | Brass | Electroless nickel plating, M5 type only | |
| 7 | Seat ring | Brass | Electroless nickel plating | |
| 8 | Lock nut | SteelNote 2) | Meter-out | Zinc chromate platedNote 3) |
| Meter-in | Black zinc chromate plated | |||
| 9 | U-seal | HNBR | - | |
| 10 | Cassette | - | - | |
| 11 | Seal | NBR | - | |
| 12 | O-ring | NBR | - | |
| 13 | O-ring | NBR | - | |
| 14 | O-ring | NBR | - | |
| 15 | O-ring | NBR | - | |
| 16 | Spacer | - | M5 type only | |
| 17 | Gasket | NBR / stainless steel | - | |
Note 1) M5 and U10/32 types are black zinc chromate plated brass.
Note 2) The material of the lock nut option J (round type) is brass. For AS23□1FM only, it is made of steel.
Note 3) The surface treatment of the lock nut option J (round type) is electroless nickel plated.
Meter-in type (M5 type) structural drawing
Meter-in type (U10/32 type) structural drawing
*See the manufacturer's catalog for information other than the above.