Speed Controller With One-Touch Fitting, Plug-In Type, AS□□□□P Series
Caution
- For specifications and details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for details.
Product Description
Speed Controller With One-Touch Fitting, Plug-In Type
Speed controllers are used to regulate the speed of movement of pneumatic actuators. They offer a wide variety of sizes to choose from.
[Feature]
● Shape : Plug-In Type
● Control Type : Meter-In / Meter-Out
● Applicable Tube O.D. (mm.) : 4, 6, 8, 10 and 12
● Applicable Tube Materials : Nylon, Soft Nylon, Polyurethane
● Operating Temp. Range(°C) : -5 to 60 (No freezing)
[Application]
Speed controllers are installed on cylinders to adjust flow rate.
Speed Controller With One-Touch Fitting, Plug-In Type, AS□□□□P Series Specifications
Speed Controller With One-Touch Fitting external appearance
Speed Controller With One-Touch Fitting example of use
Speed Controller With One-Touch Fitting dimensional drawing (meter-out type)
Speed Controller With One-Touch Fitting dimensional drawing (meter-in type)
| Model | A | B | C | øD | E | øF | øG | øH | J | K | L | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIN | MAX | MIN | MAX | ||||||||||
| AS10□0P-04-04 | 38.9 | 41.7 | 23.9 | 26.7 | 26 | 9.3 | 17 | 4 | 4 | 10 | 12.7 | 17.4 | 22.4 |
| AS20□0P-04-04 | 46.4 | 51.4 | 31.4 | 36.4 | 30 | 9.3 | 17.1 | 4 | 4 | 13.6 | 12.7 | 18.9 | 25.7 |
| AS20□0P-06-06 | 47.3 | 52.3 | 31.3 | 36.3 | 30 | 11.6 | 18 | 6 | 6 | 13.6 | 13.5 | 19.9 | 26.7 |
| AS25□0P-06-06 | 49.6 | 54.6 | 33.6 | 38.6 | 32 | 12.8 | 18 | 6 | 6 | 17 | 16.8 | 24.1 | 32.6 |
| AS30□0P-08-08 | 55.5 | 60.5 | 37 | 42 | 36 | 15.2 | 19 | 8 | 8 | 22 | 18.5 | 27 | 38 |
| AS30□0P-10-10 | 58.5 | 63.5 | 37.5 | 42.5 | 39 | 18.5 | 22 | 10 | 10 | 22 | 21 | 30.5 | 41.5 |
Unit: mm
Specifications
| Usable fluids | Air |
|---|---|
| Proof pressure | 1.5 MPa |
| Max. operating pressure | 1 MPa |
| Min. operating pressure | 0.1 MPa |
| Ambient and fluid temperature | -5 to 60℃ (no freezing) |
| Applicable tubing material | Nylon, soft nylon, polyurethane |
Flow rate and sonic conductance
| Model | AS10□0P | AS20□0P | AS25□0P | AS30□0P | |||
|---|---|---|---|---|---|---|---|
| Rod / tubing outer diameter, metric size | ø4 | ø4 | ø6 | ø6 | ø8 | ø10 | |
| Controlled flow Free flow | Flow rate L/min (ANR) | 100 | 130 | 230 | 290 | 660 | 920 |
| Sonic conductance dm3/(s·bar) | 0.28 | 0.36 | 0.64 | 0.8 | 1.8 | 2.6 | |
| Critical pressure ratio | Controlled flow | 0.2 | 0.2 | 0.2 | 0.2 | ||
| Free flow | 0.25 | 0.25 | 0.25 | 0.25 | |||
Note) Flow rate at a pressure of 0.5 MPa and a temperature of 20℃.
Needle Valve: Flow Rate Characteristics
AS10□0P-04-04 Needle Valve: Flow Rate Characteristics
AS20□0P-□-□ Needle Valve: Flow Rate Characteristics
AS25□0P-06-06 Needle Valve: Flow Rate Characteristics
AS30□0P-□-□ Needle Valve: Flow Rate Characteristics
Note) The numbers above the flow rate characteristics curves in the charts show the applicable tubing outside diameter as defined by the product number.
Warning
Speed Controller With One-Touch Fittings component name diagram
Do not use Body A in a continuously rotating place.
This may cause damage to Body A or fittings.
Caution (Release From One-Touch Fitting)
Method of release from one-touch fitting
The release ring slides up and down.
The drop-prevention function prevents the release ring from coming away from Body A.
- 1.Slide down the release ring and push the release button to the end.
- 2.Maintain this condition while bringing the speed controller body up.
- 3.Remove finger from release ring and remove the speed controller from the one-touch fitting.