Fluoropolymer Pipe Fitting, LQ3 Series, Female Connector, Inch Size
Caution
- Refer to the catalog for product specifications.
- Product images may be representative images. Refer to the catalog for details.
Product Description
An inch size female connector.
[Features]
· A fluoropolymer fitting.
· A flared collet structure.
· Triple-seal construction.
· Excellent assemblability.
· Excellent flow-through characteristics.
· Able to withstand thermal stress.
· For use at 200°C.
Fluoropolymer Fittings / Hyper Fittings Female Connector Inch Size Specifications
| Series | Size | Pipe connection port diameter | Tube outer diameter | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch Size | |||||||||||||||||
| None | 1/8 " | 1/4 " | 3/8 " | 1/2 " | 3/4 " | 1 " | 1 1/4 " | 1/8 " | 1/4 " | 3/8 " | 1/2 " | 3/4 " | 1 " | 1 1/4 " | |||
| Connector LQ3H | Female | 1 | - | ● | - | - | - | - | - | - | ● | - | - | - | - | - | - |
| 2 | - | ● | ● | - | - | - | - | - | - | ● | - | - | - | - | - | ||
| 3 | - | ● | ● | ● | - | - | - | - | - | - | ● | - | - | - | - | ||
| 4 | - | - | ● | ● | ● | - | - | - | - | - | - | ● | - | - | - | ||
| 5 | - | - | - | ● | ● | ● | - | - | - | - | - | - | ● | - | - | ||
| 6 | - | - | - | - | ● | ● | ● | - | - | - | - | - | - | ● | - | ||
Withstand pressure and heat resistance performance
Specifications
- Material: New PFA
- Maximum operating pressure (at 20°C): 1.0 MPa
- Withstand pressure: Refer to the withstand pressure and heat resistance performance curves on the left.
- Operating temperature (nut material PVDF): 0 to 150°C
- Operating temperature (nut material PFA): 0 to 200°C
External appearance / Outline dimensional drawing (Units: mm)
Female Connector Inch Size External Appearance
Female Connector Inch Size dimensional drawing
| Model | Applicable tube outer diameter | Connection thread Rc/NPT | E | E' | H | L | L' | M | W | Y |
|---|---|---|---|---|---|---|---|---|---|---|
| LQ3H1A-F□ | 1/8 " | 1/8 " | 10 | 9 | 11 | 35 | 34 | 14 | 10 | 18.5 |
| LQ3H2A-F□ | 1/4 " | 1/8 " | 17 | 16 | 16 | 40 | 39 | 20 | 14 | 18.5 |
| LQ3H2B-F□ | 1/4 " | 45 | 44 | 21.5 | ||||||
| LQ3H3A-F□ | 3/8 " | 1/8 " | 22.5 | 19.5 | 21 | 50.5 | 47.5 | 25 | 18 | 18.5 |
| LQ3H3B-F□ | 1/4 " | 55 | 52 | 21.5 | ||||||
| LQ3H3C-F□ | 3/8 " | 55.5 | 52.5 | 25 | ||||||
| LQ3H4A-F□ | 1/2 " | 1/4 " | 24.5 | 22.5 | 24 | 55.5 | 53 | 29 | 22 | 21.5 |
| LQ3H4B-F□ | 3/8 " | 58 | 56 | 25 | ||||||
| LQ3H4C-F□ | 1/2 " | 66 | 64 | 29.5 | ||||||
| LQ3H5A-F□ | 3/4 " | 3/8 " | 26.5 | 24 | 32 | 67 | 64.5 | 37 | 30 | 25 |
| LQ3H5B-F□ | 1/2 " | 72 | 69.5 | 29.5 | ||||||
| LQ3H5C-F□ | 3/4 " | 73.5 | 71 | 36 | ||||||
| LQ3H6A-F□ | 1 " | 1/2 " | 30 | 26 | 41 | 81.5 | 77.5 | 49 | 36 | 29.5 |
| LQ3H6B-F□ | 3/4 " | 83 | 79 | 36 | ||||||
| LQ3H6C-F□ | 1 " | 90.5 | 86.5 | 44.5 |
(E, E'): Shows the approximate dimension of the inserted tubing from the end of the nut.
(E'), L': Nut material PVDF dimensions.
W: Width across flats.
Notes For Tubing
1. The dedicated tool must be used for connecting tubes.
Dedicated tool figure
2. Tighten the nut as far as the end surface of the main body. In order to confirm that it has properly reached the end surface of the main body, tighten by a further 1/8th (approx.) of a turn. You will know that you have sufficiently tightened the nut if it will turn no further past this point. Refer to the appropriate tightening torques detailed below.
| Body size | Torque (N·m) |
|---|---|
| 1 | 0.7 to 0.9 |
| 2 | 1.6 to 1.8 |
| 3 | 3.2 to 3.5 |
| 4 | 5.0 to 5.3 |
| 5 | 10.0 to 10.5 |
| 6 | 22.5 to 23.0 |
- *Be sure to read the notes before use.
- * Refer to the catalog for safety precautions and notes regarding tube connections and dedicated tools.