Fluoropolymer Pipe Fitting, LQ3 Series, Straight Adapter, Inch Size
Caution
- For specifications and details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for details.
Product Description
Fluoropolymer fitting inch size straight adapter.
[Features]
· Material: New PFA.
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
Fluoropolymer Fittings Hyper Fittings Straight Adapter Inch Size Specifications
| Series | Size | Tube Outer Diameter | ||||||
|---|---|---|---|---|---|---|---|---|
| Inch Size | ||||||||
| 1/8 " | 1/4 " | 3/8 " | 1/2 " | 3/4 " | 1 " | 1 1/4 " | ||
| Straight Adapter LQ3A | 2 | - | ● | - | - | - | - | - |
| 3 | - | - | ● | - | - | - | - | |
| 4 | - | - | - | ● | - | - | - | |
| 5 | - | - | - | - | ● | - | - | |
| 6 | - | - | - | - | - | ● | - | |
| 7 | - | - | - | - | - | - | ● | |
Withstand Pressure and Heat Resistance Performance
Specifications
- Maximum operating pressure (at 20°C): 1.0 MPa
- Proof pressure:: Refer to diagram on the left.
- Operating temperature (nut material PVDF): 0 to 150°C
- Operating temperature (nut material PFA): 0 to 200°C
Dimensional Outline Drawing Units: mm
Straight Adapter Inch Size Dimensional Drawing
| Model | E | E' | H | L1 | L1' | L2 | L2' | M | P | Q | W |
|---|---|---|---|---|---|---|---|---|---|---|---|
| LQ3A2A | 17 | 16 | 16 | 32 | 30.5 | 46 | 44.5 | 20 | 13.7 | 9 | 14 |
| LQ3A2B | 58 | 56.5 | 21.3 | 15.4 | |||||||
| LQ3A2C | 26.7 | 20.5 | |||||||||
| LQ3A2D | 32.5 | 31 | 70.5 | 69 | 33.4 | 26.3 | |||||
| LQ3A2E | 74.5 | 73 | 60.3 | 52.5 | |||||||
| LQ3A3A | 22.5 | 19.5 | 21 | 40 | 39 | 56 | 53 | 25 | 13.7 | 9 | 18 |
| LQ3A3B | 66 | 65 | 21.3 | 15.4 | |||||||
| LQ3A3C | 26.7 | 20.5 | |||||||||
| LQ3A4A | 24.5 | 22.5 | 24 | 47 | 45 | 80 | 78 | 29 | 21.3 | 15.4 | 22 |
| LQ3A4B | 26.7 | 20.5 | |||||||||
| LQ3A4C | 33.4 | 26.3 | |||||||||
| LQ3A4D | 49 | 47 | 88 | 86 | 60.3 | 52.5 | |||||
| LQ3A5A | 26.5 | 24 | 32 | 57 | 54.5 | 95 | 92.5 | 37 | 21.3 | 15.4 | 30 |
| LQ3A5B | 26.7 | 20.5 | |||||||||
| LQ3A5C | 33.4 | 26.3 | |||||||||
| LQ3A6A | 30 | 26 | 41 | 66.5 | 62.5 | 104.5 | 100.5 | 49 | 26.7 | 20.5 | 36 |
| LQ3A6B | 33.4 | 26.3 | |||||||||
| LQ3A6C | 68.5 | 64.5 | 107.5 | 103.5 | 60.3 | 52.5 | |||||
| LQ3A7A | 35 | 35 | 50 | 79 | 79 | 117 | 117 | 64 | 33.4 | 26.3 | 46 |
(E, E'): Reference dimension for the inserted tubing from the end surface of the nut.
(E') L1', L2': Nut material PVDF dimensions.
W: Width across flats dimension.
Precautions for piping
1. Use special tools to connect tubing.
Special tool image figure
2. Tighten the nut until it touches the end surface of the body, and then tighten it an additional 1/8 turn to ensure that the nut has reached the end surface.
If the nut will not turn any further, then it means a sufficient tightening has occurred.
Refer to the proper tightening torques shown below.
| Body size | Torque (N·m) |
|---|---|
| 1 | 0.7 to 0.9 |
| 2 | 1.6 to 1.8 |
| 3 | 3.2 to 3.5 |
| 4 | 5.0 to 5.3 |
| 5 | 10.0 to 10.5 |
| 6 | 22.5 to 23.0 |
| 7 | 23.0 to 26.5 |
*Refer to the manufacturer's catalog regarding special tools.