Male Branch Tee KGT Stainless Steel One-Touch Fitting, KG Series.

Brand :

SMC

Caution

For materials and specification details, please refer to the catalog.
Product images may be representative images. Refer to the catalog for shape details.

Product Description

SMC One-Touch fitting.
[Features]
· Stainless steel specifications for use in corrosive environments.
· SUS303 is used for metal parts.
· Suitable for use in CRT production lines where contact with copper must be avoided, as well as cleaning of food processing machines where water or salt water splashes.
· Suitable for use inside clean rooms where discoloration of copper materials and dust caused by corrosion must be avoided.
[Applications]
· Use to branch line from female thread in both 90° directions.

Male Branch Tee: KGT Outline Drawings And Dimensions

Male Branch Tee: KGT outline drawing (M5)

Male Branch Tee: KGT outline drawing (R)

Applicable tubing Outer diameter (mm)	Connection thread M R	Model	H (width across flats)	øD1^{Note 1)}	øD2	L1	L2	*A	M	Note 2) Effective cross-sectional area (mm²)		Weight g
Applicable tubing Outer diameter (mm)	Connection thread M R	Model	H (width across flats)	øD1^{Note 1)}	øD2	L1	L2	*A	M	Nylon	Urethane	Weight g
4	M5 × 0.8	KGT04-M5	7	9.3	-	15.6	13.7	15.3	12.7	4.3	4.3	3.5
	1/8	KGT04-01	10	10.4	10	18	21.1	23	16	6.0	4.1	13
	1/4	KGT04-02	14	10.4	10	18	25.5	25	16	6.0	4.1	19
6	M5 × 0.8	KGT06-M5	7	11.6	-	16.1	14.7	17.4	13.5	4.3	4.3	4.2
	1/8	KGT06-01	10	12.8	10	20	22.1	25.5	17	13.9	11.0	12
	1/4	KGT06-02	14				26.5	27.5				20
	3/8	KGT06-03	17				27.9	29				34
8	1/8	KGT08-01	12	15.2	12	23	23.6	28	18.5	26.3	18.2	14
	1/4	KGT08-02	14				28	30				22
	3/8	KGT08-03	17				29.4	31.5				36
10	1/8	KGT10-01	17	18.5	17	26.5	26.1	32	21	40.8	29.0	31
	1/4	KGT10-02					29.5	33				29
	3/8	KGT10-03					30.9	34.5				39
	1/2	KGT10-04	22				35.1	37				66
12	1/4	KGT12-02	17	20.9	17	28.5	30.5	35.5	22	57.2	45.2	31
	3/8	KGT12-03	17				31.9	37				41
	1/2	KGT12-04	22				36.1	39.5				68
16	3/8	KGT16-03	22	26.5	20.9	34	36.9	44.5	25	71	(71)	112
16	1/2	KGT16-04	22	26.5	20.9	34	39.6	46	25	100	(100)	116

* Reference dimensions of R thread after installation
Note 1) øD1 is the maximum diameter.
Note 2) Dimension inside "( )" is for soft nylon

One-Touch Fitting Stainless Steel KG Series Common Specifications (Reference)

Structure

KG Series Structure

Applicable Tubing

Tube materials	FEP, PFA, nylon, soft nylon^{Note 1)}, polyurethane
Tube outer diameter	ø4, ø6, ø8, ø10, ø12, ø16

Note 1) For soft nylon tube, water cannot be used.

Specifications

Usable fluids		Air, water^{Note 2)}
Operating pressure range^{Note 3)}		-100 kPa to 1 MPa
Proof pressure		3 MPa
Ambient and fluid temperature		-5 to 60°C, if water is used then 0 to 40°C (no freezing)
Thread	Mounting Section	JIS B 0203 (taper thread for piping) JIS B 0205 (metric coarse thread)
Thread	Nut part	JIS B 0205 (metric fine thread)
Thread sealant		With sealant^{Note 4)}Or, without sealants

Note 2) The surge pressure must be under the maximum operating pressure.
Note 3) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Note 4) Add the suffix "S" to the part number if w/ seal is desired.

Principle Part Materials

Body	SUS303, PBT
Stud	SUS303 (thread portion)
Chuck	SUS304
Guide	SUS304, SUS303, PBT
Collet, release button	POM
Seal, O-ring	NBR
Gasket	SUS304/NBR