Tube Cap KGC Stainless Steel One-Touch Fitting, KG Series.
Caution
- For materials and specification details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for shape details.
Product Description
A One-Touch fitting with stainless steel specifications for use in corrosive environments.
[Features]
· SUS303 is used for metal parts.
· Suitable for use in CRT production lines where contact with copper must be avoided, as well as cleaning of food processing machines where water or salt water splashes.
· Suitable for use inside clean rooms where discoloration of copper materials and dust caused by corrosion must be avoided.
· RoHS compliant.
[Applications]
· Use to plug unused tubing.
Stainless Steel One-Touch Fitting KGC Tube Cap Specifications
Tube Cap external view
Tube Cap dimensional drawing (Unit: mm)
Applicable tube materials: FEP, PFA, nylon, soft nylon. Note 1), polyurethane
Note 1) Soft nylon tubing is not compatible with water.
| Applicable tubing outer diameter (mm) | Model | Note) øD | L | M | Weight (g) |
|---|---|---|---|---|---|
| 4 | KGC04-00 | 10.4 | 17 | 16 | 3 |
| 6 | KGC06-00 | 12.8 | 18.5 | 17 | 3 |
| 8 | KGC08-00 | 15.2 | 20.5 | 18.5 | 4 |
| 10 | KGC10-00 | 18.5 | 23 | 21 | 6 |
| 12 | KGC12-00 | 20.9 | 24 | 22 | 8 |
| 16 | KGC16-00 | 26.5 | 28 | 25 | 13 |
Units: mm
Note) øD is the maximum diameter.
Specifications
| Usable fluids | Air, waterNote 2) | |
|---|---|---|
| Operating pressure rangeNote 3) | -100 kPa to 1 MPa | |
| Proof pressure | 3 MPa | |
| Ambient and fluid temperature | -5 to 60°C, if water is used then 0 to 40°C (no freezing) | |
| Thread | Mounting section | JIS B 0203 (taper thread for piping) JIS B 0205 (metric coarse thread) |
| Nut part | JIS B 0205 (metric fine thread) | |
| Thread sealant | With sealantNote 4)Or, without sealants | |
Note 2) The surge pressure must be under the maximum operating pressure.
Note 3) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Note 4) Add the suffix "S" to the part number if w/ seal is desired.
Principle Part Materials
| Body | SUS303, PBT |
|---|---|
| Stud | SUS303 (thread portion) |
| Chuck | SUS304 |
| Guide | SUS304, SUS303, PBT |
| Collet, release button | POM |
| Seal, O-ring | NBR |
| Gasket | SUS304/NBR |