Transmission-Type X-Axis Fixed Stage

Transmission-Type X-Axis Fixed Stage

Click this image to zoom it.

Move the mouse over the image to zoom

  • LS-P4051FX 40×40
  • LS-P6051FX 60×60

· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Use hex wrench to adjust position. * Hex wrench not included.
· Supports specially shaped wrenches instead of hex wrench (optional).
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment instead of requiring constant adjustment.
· The stage has a transmission hole at the center.
· Can be installed horizontally, vertically and upside-down.


Japanese Only

Part Number

Configured Part Number is shown.


Part Number
Part NumberVolume DiscountDays to ShipRoHS
52 Day(s) or more 10


  1. 1

Basic Information

Stage surface (length) (range of selection)(mm) 26~40 Stage surface (width) (range of selection)(mm) 26~40 Load Capacity (Range Selectable)(N) 5~30
Travel Distance (Selection Range) ~ ±10mm Feeding Method Feed Screw Table Material Aluminum alloy
Table Surface Treatment Black anodize satined Travel Guide ground glass joint Stage surface (length)(mm) 40
Stage surface (width)(mm) 40 Load Capacity(N) 24.5 Travel Distance (X Axis)(mm) ±3.5
Type X Axis Fix Stage Clamp Type No Through Hole (Table Center Hole) Presence
Moving Direction X axis, 1 direction

Please check the type/dimensions/specifications of the part LS-P4051FX in the Transmission-Type X-Axis Fixed Stage series.

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)