Polyurethane Tubing 10-TU Series
Brand :
SMC
Caution
- For specifications and details, please refer to the catalog.
- Product pictures are representations.
Product Description
Flexible polyurethane tubing.
[Features]
· Flexible. 0.8 MPa or less type (at 20°C).
· Polyurethane tubing.
[Applications]
· For general pneumatic tubing.
Features of Polyurethane Tubing 10-TU Series
Appearance of 10-TU Series
List Of Colors
- B: Black
- W: White
- R: Red
- BU: Blue
- Y: Yellow
- G: Green
- C: Clear
- YR: Orange
Series List
| - | Tubing Size | ||||||
|---|---|---|---|---|---|---|---|
| Inch size (TIUB series) | Metric size (TU series) | ||||||
| Nominal | 10-TIUB01 | 10-TU0212 | 10-TU0425 | 10-TU0604 | 10-TU0805 | 10-TU1065 | 10-TU1208 |
| Outer diameter (mm) | 3.2 | 2 | 4 | 6 | 8 | 10 | 12 |
| Inner diameter (mm) | 2 | 1.2 | 2.5 | 4 | 5 | 6.5 | 8 |
Specifications
| Fluid | Air, water | ||||||
|---|---|---|---|---|---|---|---|
| Maximum operating pressure (at 20°C) | 0.8 MPa | ||||||
| Burst pressure | See the burst pressure characteristics curve | ||||||
| Recommended fittings | Clean series fittings 10-KQ2, 10-KF, 10-KDM, 10-KG, 10-M, 10-MS, KP, KPQ, KPG | ||||||
| Minimum bending radius mm | 10 | 4 | 10 | 15 | 20 | 27 | 35 |
| Operating temperature | -20 to 60°C, Water: 0 to 40°C (No freezing) | ||||||
| Material | Polyurethane | ||||||
| Cleanliness class (ISO class) | Class 3 | ||||||
Burst Pressure Characteristics Curve And Operating Pressure
Bend the tube into a U shape at a temperature of 20°C. Fix one end and close the loop gradually. Measure 2R when the tube breaks or is crushed.
Caution
- 1. Applicable for general industrial water. Please consult with SMC if using other kinds of fluid. Also, the surge pressure must not exceed the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes.
- 2. The maximum operating pressure is the value at 20°C. For other temperatures, refer to the burst pressure characteristics curve in the figure above. Furthermore, abnormal temperature rise caused by adiabatic compression may result in the tubing bursting.
- 3. The value of the minimum bending radius is measured at a temperature of 20°C as shown above (figure on the left).