Soft Nylon Tubing TS/TISA Series

Brand :

SMC

Caution

The maximum operating pressure values listed are at 20°C or less. See the catalog for details.
For specifications and details, please refer to the catalog.
Product pictures are representations.

Product Description

Pliable soft nylon tubing.
[Features]
・ Maximum operating pressure of 1.0 MPa or less (At 20°C)
[Applications]
・ For general pneumatic piping

Specifications Of Soft Nylon Tubing TS/TISA Series

Soft Nylon Tubing TS/TISA Series: related images

Appearance of Soft Nylon Tubing TS/TISA Series

Maximum operating pressure

-	Tubing Size
-	Metric size (TS series)						Inch size (TISA series)
Nominal	TS0425	TS0604	TS0806	TS1075	TS1209	TS1612	TISA01	TISA05	TISA07	TISA11	TISA13
Outer diameter mm	4	6	8	10	12	16	3.18	4.76	6.35	9.53	12.7
Inner diameter (mm)	2.5	4	6	7.5	9	12	2.18	3.48	4.57	6.99	9.56

List Of Colors

Black (B)
White (W)
Red (R)
Blue (BU)
Yellow (Y)
Green (G)

Specifications

Fluid		Air/water^{Note 1)}
Maximum operating pressure MPa^{Note 2)}	20°C or less	2.0	1.7	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3
	40°C	1.4	1.2	0.9	0.9	0.9	0.9	0.9	0.9	0.9	0.9	0.9
	60°C	1.0	0.85	0.65	0.65	0.65	0.65	0.65	0.65	0.65	0.65	0.65
	80°C	0.8	0.65	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5
	100°C	0.6	0.45	0.35	0.35	0.35	0.4	0.35	0.35	0.35	0.35	0.35
Applicable fittings^{Note 2) Note 3)}		One-touch fittings, insert fittings, self-align fittings, miniature fittings
Minimum bending radius mm^{Note 4)}	Minimum bending radius	15	23	45	55	65	90	18	27	30	55	65
Minimum bending radius mm^{Note 4)}	Tube close bend radius (reference value)	12	17	34	42	50	70	12	15	23	42	50
Operating temperature^{Note 2)}		-40 to +100°C, Water: 0 to +50°C (No freezing)
Material		Nylon 12

Note 1) Refer to "Printing/Fluid."
Note 2) Be sure to operate under the maximum operating pressure and maximum operating temperature conditions using the lower maximum operating specification of either the tubing or fittings.
Note 3) Mount an inner sleeve when using metal one-touch fittings in high-temperature environments of 60°C or more. Use self-align fittings at a temperature of 60°C or less.
Note 4) The minimum bending radius is a representative value measured as shown in the figure on the left.

Use a tube above the recommended minimum bending radius.
The tubing may be bent if used under the recommended minimum bending radius. Therefore, refer to the refraction value and make sure that the tubing is not bent or flattened.
The tube close bend radius is not guaranteed. The value of 2R is a representative value measured with a bent or flattened tube using the method shown in the figure on the left.

How to measure the minimum bending radius

Bend the tubing into a U shape at a temperature of 20°C. Fix one end and close the loop gradually. Measure 2R when the deformed ratio of the tubing diameter at bending reaches 10%.

Printing/Fluid

Print Code		Fluid
Previous	SMC TS 0604 SOFTNYLON 6 × 4	Air
NEW	● SMC TS 0604 SOFTNYLON 6 × 4	Air/water

Made-To-Order Specifications

100‑m reel: Metric size and inch size, except for ø16 (diameter 16 mm). Suffix "-X3" to the end of part number.
Longer length reel: Metric size. Suffix "-X3" to the end of part number.
20‑m roll: Inch size. Suffix "-X4" to the end of part number.

* Please contact SMC for specifications in detail, dimensions, delivery and specifications other than those mentioned above.

Caution

1. Compatible with water due to a change in materials. Compatible fluid types are printed on the tube body for differentiation, so please be sure to check this.
Note) If using the previous TS/TISA series with "water," the tube may shrink and cause air leakage or the tube may fall out.
2. The products whose material has changed are applicable to general industrial water. Please contact SMC if using other kinds of fluid. Also, the surge pressure must not exceed the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes.
3. Please exercise caution when using this item in a clean room. There is a possibility of plasticizers and other materials precipitating on the tube surface and detracting from the cleanliness level of the room.

*See manufacturer's catalog for safety information.