Air Combination, Filter Regulator + Lubricator, AC10A-A To AC40A-A

Brand :

SMC

Caution

Refer to the catalog for details on product specifications.
The products shown in the image are representative. CAD data is not supported for some model numbers.

Product Description

Air Combination Filter Regulator + Lubricator with a bowl that is completely covered by transparent bowl guard.
[Features]
· The inside can be seen from all angles (360°).
· The bowl is protected from the external environment, ensuring high levels of safety.

Air Combination Filter Regulator + Lubricator, AC10A-A To AC40A-A Specifications

Model Number Notation

Model number notation: images

-				Code	Contents	(1)
						Body size
						10	20	30	40
(2)	Screw Type			No symbol	Metric thread (M5)	●	-	-	-
				No symbol	Rc	-	●	●	●
				N ^{Note 1)}	NPT	-	●	●	●
				F ^{Note 2)}	G	-	●	●	●
(3)	Piping connection port diameter			M5	M5	●	-	-	-
				01	1/8	-	●	-	-
				02	1/4	-	●	●	●
				03	3/8	-	-	●	●
				04	1/2	-	-	-	●
				06	3/4	-	-	-	●
(4)	^{Note 3)} Option	a	Float type auto drain	No symbol	Without auto drain	●	●	●	●
				C ^{Note 4)}	N.C. (Normally Closed) Drain port is closed when no pressure is applied	●	●	●	●
				D ^{Note 5)}	N.O. (Normally Open) Drain port is open when no pressure is applied	-	-	●	●
		b	Pressure gauge ^{Note 6)}	No symbol	Without pressure gauge	●	●	●	●
				G	Round-type pressure gauge (without limit indicator)	●	-	-	-
				G	Round-type pressure gauge (with limit indicator)	-	●	●	●
				M	Round-type pressure gauge (with color zone)	-	●	●	●
(5)	Attachment	c	Check valve	No symbol	No attachment	●	●	●	●
		c	Check valve	K	Mounting position: AW + K + AL	-	●	●	● ^{Note 7)}
		d	Pressure switch	No symbol	No attachment	●	●	●	●
		d	Pressure switch	S ^{Note 8)}	Mounting position: AW + S + AL	-	●	●	●
		e	Residual pressure relief 3-port valve	No symbol	No attachment	●	●	●	●
		e	Residual pressure relief 3-port valve	V	Mounting position: AW + AL + V	-	●	●	●
(6)	Semi-standard	f	Set pressure ^{Note 9)}	No symbol	0.05 to 0.7‑MPa setting	●	●	●	●
		f	Set pressure ^{Note 9)}	1	0.02 to 0.2‑MPa setting	●	●	●	●
		g	Bowl ^{Note 10)}	No symbol	Polycarbonate bowl	●	●	●	●
				2	Metal bowl	●	●	●	●
				6	Nylon bowl	●	●	●	●
				8	Metal bowl with level gauge	-	-	●	●
				C	With bowl guard	-	●	-^{Note 11)}	-^{Note 11)}
				6C	With bowl guard (nylon bowl)	-	●	-^{Note 12)}	-^{Note 12)}
		h	Filter ^{Note 13)} Regulator Drain exhaust outlet	No symbol	With drain cock	●	●	●	●
				J ^{Note 14)}	Drain guide 1/8	-	●	-	-
				J ^{Note 14)}	Drain guide 1/4	-	-	●	●
				W ^{Note 15)}	Drain cock with barb fitting (ø6 [diameter 6 mm] × ø4 [diameter 4 mm] for nylon tubes)	-	-	●	●
(6)	Semi-standard	i	Lubricator Oil discharge outlet	No symbol	Without drain cock	●	●	●	●
		i	Lubricator Oil discharge outlet	3^{Note 16)}	Lubricator with drain cock	●	●	●	●
		j	Exhaust mechanism	No symbol	Relieving type	●	●	●	●
		j	Exhaust mechanism	N	Non-relieving type	●	●	●	●
		k	Flow direction	No symbol	Flow direction: left → right	●	●	●	●
		k	Flow direction	R	Flow direction: right → left	●	●	●	●
		l	Pressure unit	No symbol	Unit used on nameplate and pressure gauge: MPa	●	●	●	●
		l	Pressure unit	Z ^{Note 17)}	Name plate, bowl caution plate and pressure gauge units: psi, °F	○ ^{Note 18)}	○ ^{Note 18)}	○ ^{Note 18)}	○ ^{Note 18)}

Note 1) Drain guide is NPT 1/8 (applicable to the AC20A-A); and NPT1/4 (applicable to the AC30A-A to AC40A-A).
　The auto drain port comes with ø3/8" one-touch fitting (applicable to the AC30A-A to AC40A-A).
Note 2) The drain guide is G1/8 (applicable to the AC20A-A); and G1/4 (applicable to the AC30A-A to AC40A-A).
Note 3) Options G and M are not assembled and are supplied loose at the time of shipment.
Note 4) When pressure is not applied, condensate which does not start the auto drain mechanism will remain in the drain bowl. Therefore manual release before ending operations is recommended.
Note 5) If the compressor used is small (0.75 kW, discharge flow rate is less than 100 L/min [ANR]), air leakage from the drain cock may occur when operations start. As such an N.C. type is recommended.
Note 6) When the pressure gauge is attached, a 1.0 MPa will be fitted for standard (0.7 MPa setting) type; 0.4 MPa for the 0.2‑MPa type (1.0‑MPa pressure gauge only for the AC10A-A).
Note 7) Not available with piping connection port size: 06.
Note 8) The bracket position varies depending on the pressure switch mounting.
Note 9) Pressure can be set higher than the specification pressure in some cases, but use with the pressure within the specified range.
Note 10) A bowl guard is provided as standard (polycarbonate).
Note 11) A bowl guard is provided as standard (nylon).
Note 12) Float type auto drain: Cannot be selected in combination with C, D.
Note 13) Does not include a valve function.
Note 14) Metal bowl: Cannot be selected in combination with 2, 8.
Note 15) When choosing with W (filter regulator drain port): the drain cock of the lubricator will be with barb fittings.
Note 16) Thread type: M5, NPT. Under new Japanese measurement laws, this product is only available for sale outside of Japan (SI units are used in Japan).
　However, the pressure switch offers dual unit presentation in both MPa and psi.
　Round-type pressure gauge (with color zone): cannot be used in combination with M.
Note 17) ○ is for thread types M5 and NPT only.

Standard specification

Model		AC10A-A	AC20A-A	AC30A-A	AC40A-A	AC40A-06-A
Components	Filter regulator [AW]	AW10-A	AW20-A	AW30-A	AW40-A	AW40-06-A
Components	Lubricator [AL]	AL10-A	AL20-A	AL30-A	AL40-A	AL40-06-A
Piping connection port diameter		M5 × 0.8	1/8, 1/4	1/4, 3/8	1/4, 3/8, 1/2	3/4
Pressure gauge connection port size [AW]		1/16	1/8
Applicable fluids		Air
Ambient temperature and working fluid temperature		−5 to 60°C (no freezing)
Proof pressure		1.5 MPa
Maximum operating pressure		1.0 MPa
Set pressure range [AW]		0.05 to 0.7 MPa
Filtration [AW]		5 mm
Recommended lubricant [AL]		Type 1 turbine oil (ISO VG32)
Case materials [AW/AL]		Polycarbonate
Case guard [AW/AL]		-	Semi-standard (steel)	Standard equipment (polycarbonate)
Structure [AW]		Relieving type
Weight (kg)		0.20	0.34	0.67	1.24	1.35

Air Combination Filter Regulator + Lubricator, AC10A-A To AC40A-A Dimensions

(Unit: mm)

AC10A-A/AC20A-A dimensional drawing

(Unit: mm)

AC30A-A to AC40A-06-A dimensional drawing

Model	Standard specification
	P₁	P₂	A	B	C ^Note)	E	F	G	J	Bracket mounting dimensions
	P₁	P₂	A	B	C ^Note)	E	F	G	J	M	Q₁	Q₂	R	S	U	V
AC10A-A	M5 × 0.8	1/16	56	59.9	47.4	-	28	25	12.5	25	20	27	4.5	6.8	3	24.5
AC20A-A	1/8, 1/4	1/8	83.2	87.6	67.4	-	41.6	60	23.4	30	24	33	5.5	12	3.5	29
AC30A-A	1/4, 3/8	1/8	110.2	115.1	83.5	30	55.1	80	30.5	41	35	-	7	14	4	41
AC40A-A	1/4, 3/8, 1/2	1/8	145.2	147.1	100	38.4	72.6	110	36.1	50	40	-	9	18	5	48
AC40A-06-A	3/4	1/8	155.2	149.1	101.5	38.4	77.6	110	39.6	50	40	-	9	18	5	48

Model	Option specification					Semi-standard specifications
	Round-type pressure gauge		Round-type pressure gauge (with color zone)		With auto drain	With barb fittings	With drain guide	Metal bowl	Metal bowl with drain guide	Metal bowl with level gauge	Metal bowl with level gauge with drain guide
	H	J	H	J	B	B	B	B	B	B	B
AC10A-A	ø26 (diameter 26 mm)	26	-	-	77.9	-	-	59.3	-	-	-
AC20A-A	ø37.5 (diameter 37.5 mm)	58.5	ø37.5 (diameter 37.5 mm)	59.5	104.9	-	91.4	87.4	93.9	-	-
AC30A-A	ø37.5 (diameter 37.5 mm)	65	ø37.5 (diameter 37.5 mm)	66	156.8	123.6	121.9	117.6	122.1	137.6	142.1
AC40A-A	ø42.5 (diameter 42.5 mm)	72	ø42.5 (diameter 42.5 mm)	72	186.9	155.6	153.9	149.6	154.1	169.6	174.1
AC40A-06-A	ø42.5 (diameter 42.5 mm)	72	ø42.5 (diameter 42.5 mm)	72	188.9	157.6	155.9	151.6	156.1	171.6	176.1

Note) The dimension C is the length when the filter regulator knob (handle) is unlocked.