End Lock Cylinder, CBJ2 Series
Caution
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis. - Click on the catalog tab [Standards information] and refer to pp. 1,581–1,672 for a separate catalog for the auto switch.
- Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not supported for some model numbers.
Product Description
A standard type (round) air cylinder with end lock.
[Features]
・ Added bosses on both sides of the flange on both sides of the foot head to the mounting support bracket
· Easy fine adjustment of auto switch position
・ Fine adjustment of the auto switch position is possible by loosening only the screws attached to the auto switch
· Transparent switch bracket improves visibility of indicator LED
・ 90° added to ø6 with respect to the head cover port position axis
・ Improvement of piping flexibility
・ Operating Method: Double acting, single rod
・ Tube inner diameter: 16 mm
・ Variation: Built-in magnet
Cylinder With End Lock CBJ2 Series Specifications
Specifications
| Tube Inner Diameter (mm) | 16 |
|---|---|
| Action | Double acting, single rod |
| Fluid | Air |
| Proof Pressure | 1 MPa |
| Maximum operating pressure | 0.7 MPa |
| Minimum operating pressure | 0.15 MPa* |
| Ambient and Fluid Temperature | Without auto switch: -10°C to 70°C (no freezing) With auto switch: -10°C to 60°C (no freezing) |
| Cushioning | Rubber cushion |
| Lubrication | Not required (non-lubricated) |
| Stroke Length Tolerance | 0 to +1.0 |
| Piston Speed | 50 to 750 mm/s |
| Allowable Kinetic Energy | 0.090 J |
*0.06 MPa except for locking parts.
Lock Specifications
Symbol: rubber bumper
| Lock position | Head side, Rod side |
|---|---|
| Holding force (Max.) | 98 N |
| Unlocking pressure | 0.15 MPa or less |
| Backlash | 1 mm or less |
| Manual release | Non-locking type |
Standard Stroke Table
| Tube inner diameter | Standard Stroke |
|---|---|
| 16 | 15, 30, 45, 60, 75, 100, 125, 150, 175, 200 |
(Units: mm)
*Manufacture of intermediate strokes at 1‑mm intervals is possible. (Spacers are not used.)
*Applicable strokes should be confirmed according to the usage. In addition, products that exceed the standard stroke may not be able to fulfill the specifications due to deflection, etc.
*Applicable type for pivot bracket (T bracket) is double clevis (D).