3-Port Solenoid Valve VQ100 Series

Brand :

SMC

Caution

Product images may be representative. Refer to the manufacturer's catalog for details.

Product Description

SMC Solenoid Valve.
[Features]
· Unprecedented high speed, stable response, and long service life
· Boasts a large flow capacity despite its otherwise small size
· Semi-standard specifications
· Copper-free specifications
· A wide variety of wiring methods

3-Port Solenoid Valve VQ100 Series Specifications

3-Port Solenoid Valve VQ100 Series external appearance 1

3-Port Solenoid Valve VQ100 Series external appearance 2

3-Port Solenoid Valve VQ100 Series external appearance 3

Item				Type
Item				Standard Type (1 W)	High-pressure type (1.5 W)	Low-watt type (0.5 W)
	Valve Construction			3-Port Direct Operated Poppet type
Valve Specifications	Usable Fluids			Air
	Maximum Operating Pressure			0.7 MPa	0.8 MPa	0.7 MPa
	Minimum operating pressure (vacuum)			0 MPa (-0.1 MPa^*5)
	Flow Rate Characteristics	1→2	C [dm³/(s·bar)]	0.055		0.042
			b	0.22		0.27
			Cv	0.014		0.011
		2→3	C [dm³/(s·bar)]	0.083		0.045
			b	0.28		0.28
			Cv	0.021		0.012
	Response time^*1			ON: 3.5 ms, OFF: 2 ms		ON: 3.5 ms, OFF: 2.5 ms
	Ambient Temperature and Operating Fluid Temperature			-10 to 50℃ ^*2
	Lubrication			Not required
	Manual Operation			Non-locking push type / Locking type (tool required)^*3
	Mounting Orientation			Free
	Impact resistance / Vibration resistance^*4			150/30 m/s²
	Enclosure			Dust-proof
	Weight			12.6 g (L/M plug connectors without sub-plate)
Electrical Specifications	Coil Rated Voltage		DC	24 V, 12 V
	Allowable Voltage Fluctuation			±10% of rated voltage
	Coil Insulation Type			Class B or equivalent
	Power Consumption (Current)		DC	1 W (42 mA)	1.5 W (63 mA)	0.5 W (21 mA)
	Electrical Entry			Grommet Plug-in, L plug connector, M plug connector (With indicator light / surge voltage suppressor)

*2: Based on JIS B 8374-1993. Value with indicator light / surge voltage suppressor (clean air). Variation accuracy ±1 ms
*2: Use dry air when operating at low temperatures and with no condensation.
*3: The locking type is a semi-standard specification.
*4: Impact resistance: No malfunction occurred when tested using a drop tester. The test was performed once for each condition, in both energized and de-energized states, in the axial and right angle directions of the armature. (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at a right angle to the armature. (Initial value)
*5: Select model numbers with a prefix of "10-" (Clean Series) when operating with a vacuum. Can be used with 3 (R) port vacuum, 1 (P) port vacuum burst pressure. (Differential pressure of 3 (R) and 1 (P) is up to the maximum operating pressure of each type.)
*6: The power saving type supports plug-in, L and M plug connectors for lead wire electrical entry.

Item				Type
Item				Latching type	AC type	Large flow capacity type	Normally open type
Valve Specifications	Model number notation example			VQ110L-□	VQ110-1□ VQ110-2□	VQ110U-□	VQ120-□
	Maximum Operating Pressure			0.7 MPa		0.6 MPa	0.5 MPa
	Minimum Operating Pressure			0 MPa (-100 kPa^{4, 5})
	Flow Rate Characteristics	1→2^*6 (3→2)	C [dm³/(s·bar)]	0.042		0.14	0.04
			b	0.27		0.26	0.11
			Cv	0.011		0.036	0.009
		2→3^注6）（2→1）	C [dm³/(s·bar)]	0.045		0.14	0.044
			b	0.28		0.25	0.3
			Cv	0.012		0.036	0.011
	Response Time^*2			5 ms or less	15 ms or less	5 ms or less	5 ms or less
Electrical Specifications	Power Consumption (Current)		24 V DC	1 W (42 mA)^*7	-	0.35 W (15 mA)^*3	1 W (42 mA)
			12 V DC	1 W (83 mA)^*7	-	0.35 W (30 mA)^*3	1 W (83 mA)
			100 V AC	0.6 VA (6 mA)	0.5 VA (5 mA)	-
			110 V AC	0.65 VA (5.9 mA)	0.55 VA (5 mA)	-
			200 V AC	1.2 VA (6 mA)	1.0 VA (5 mA)	-
			220 V AC	1.3 VA (5.9 mA)	1.1 VA (5 mA)	-
	Lead wire electrical entry^*1			Plug-in, L plug connector, M plug connector (With indicator light / surge voltage suppressor)

*1: Grommet is available only for normally open type (without light/surge voltage suppressor). Normally open type is available only with 1 W DC specifications.
*2: Based on JIS B 8374-1993, with indicator light / surge voltage suppressor (clean air).
*3: Inrush 3.1 W (10 ms after energized), holding 0.35 W. +, - polarity present.
*4: Select model numbers with a prefix of "10-" (Clean Series) when operating with a vacuum. Can be used with 3 (R) port vacuum, 1 (P) port vacuum burst pressure. (Differential pressure of 3 (R) and 1 (P) is up to the maximum operating pressure of each type.)
*5: In the case of 1 (P) port vacuum and 3 (R) port vacuum release, use VQ120 (Normally open type)
. In this case, the prefix "10-" is not required.
*6: Value inside parentheses denote the air passage of the normally open type.
*7: +, - polarity present.
*8: Power-saving type: Inrush 1.5 W (10 ms after energized), holding 0.25 W. +, - polarity present.

Product JIS Symbol

JIS symbols for normally closed

JIS symbols for normally open

JIS symbols for latching type

Product Drawing

(Unit: mm)

Grommet: VQ1□0□-□G□-M5 (M3) dimensional drawings

*Dimensions within parentheses are for M3.
*Broken line: Locking type manual override.

(Unit: mm)

L plug connector: VQ1□0□-□L□-M5 (M3) dimensional drawings

*Dimensions within parentheses are for M3.
*Broken line: Latching, AC and large flow capacity.
*One dot chain line: Locking type manual override and push-locking type manual override (latching).

Product Structure Drawing

3-Port Solenoid Valve VQ100 Series structure drawing

Number	Part name	Material
1	Solenoid coil	-
2	Body	Resin
3	Fixed core	SUS
4	Armature Assembly	SUS, resin
5	Return Spring	SUS
6	Poppet	NBR
7	Small cross-head/straight-slot combination pan head screw	Carbon steel
8	Interface gasket	FKM
9	Sub-plate	ZDC

Precautions

Be sure to read the individual product cautions before use.
*See the manufacturer's catalog for product information other than the above.