5-Port Solenoid Valve, Plug-In, SY3000/5000/7000 Series, Single Unit / Sub-Plate Type
Caution
- ■ SMC Air Cylinder Product Selection and Technical Information
The featured products page can be found here.
■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a model number. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
Product Description
Solenoid valve equipped with a 4-position, dual 3-port valve.
[Features]
· Protective enclosure conforms to IP67 standard.
· M12 waterproof connector type for easy attachment, detachment and wiring.
· Supports side, top and bottom piping. (Ports 4A, 2B)
· Power consumption has been reduced to 1/3rd of standards by decreasing wasted holding power.
· Prevents actuator and air-operated valve malfunctions caused by exhaust from other valves.
· Includes mechanism for 3-position closed center valve residual pressure release.
· Individual replacement of solenoid valves is possible without cutting off main pressure.
5-Port Solenoid Valve, Plug-In, SY3000/5000/7000 Series Specifications
SY3000 Specifications
SY3000 Specifications
Can be connected to ø2 (diameter 2 mm) ø3.2 (diameter 3.2 mm), ø4 (diameter 4 mm), ø6 (diameter 6 mm) and ø8 (diameter 8 mm) fittings
- *M10/M11 type manifolds
SY5000 specifications
SY5000 specifications
Can be connected to ø4 (diameter 4 mm), ø6 (diameter 6 mm) and ø8 (diameter 8 mm) fittings
SY7000 specifications
SY7000 specifications
Can be connected to ø6 (diameter 6 mm), ø8 (diameter 8 mm), ø10 (diameter 10 mm) and ø12 (diameter 12 mm) fittings
Valve Specifications
| Valve Construction | Rubber Seal | Metal Seal | ||
|---|---|---|---|---|
| Usable Fluids | Air | |||
| Internal pilot operating pressure range MPa | 2-position single | 0.15 to 0.7 | 0.1 to 0.7 (High pressure: 0.1 to 1) | |
| 2-position double | 0.1 to 0.7 | |||
| 3 Position | 0.2 to 0.7 | |||
| 4-position, dual 3-port valve | 0.15 to 0.7 | - | ||
| External pilot operating pressure range MPa | Operating Pressure Range | -100 kPa to 0.7 (4-position: -100 kPa to 0.6) | -100 kPa to 0.7 (High pressure: -100 kPa to 1) | |
| Pilot Pressure Range | 2-position single | 0.25 to 0.7 | 0.1 to 0.7 (High pressure: 0.1 to 1) | |
| 2-position double | ||||
| 3 Position | ||||
| 4-position, dual 3-port valve | Operating pressure +0.1 or more (min. 0.25) to 0.7 | - | ||
| Ambient Temperature and Operating Fluid Temperature °C | -10 to 50 (no freezing) | |||
| Maximum Operating Frequency Hz | SY3000 SY5000 | 2 Position Single, Double | 5 | 20*1 |
| 4-position, dual 3-port valve | ||||
| 3 Position | 3 | 10*1 | ||
| SY7000 | 2 Position Single, Double | 5 | 10*1 | |
| 4-position, dual 3-port valve | 3 | - | ||
| 3 Position | 3 | 10*1 | ||
| Manual | Non-locking, push type | |||
| Push-turn locking slotted type | ||||
| Push-turn locking hand-operated type | ||||
| Sliding lock type | ||||
| Pilot Exhaust Method | Internal Pilot | Main valve, pilot valve common exhaust type | Main valve, pilot valve individual exhaust type | |
| External Pilot | Pilot valve individual exhaust type | |||
| Lubrication | Not required | |||
| Mounting orientation*2 | Free | Single: free Double / 3-position: Main valve shall be horizontal | ||
| Impact resistance/Vibration resistance*2 (m/s2) | 150/30 | |||
| Enclosure | IP67 (Based on IEC60529)* | |||
| Coil rated voltage (DC) | 24, 12 V | |||
| Allowable voltage fluctuation (V) | ±10% of rated voltage*3 | |||
| Power Consumption W | Standard | 0.35 (with light: 0.4) | ||
| High-pressure, quick response | 0.9 (with light: 0.95) | |||
| With power saving circuit | Standard: 0.1*4(With indicator light only) [Inrush 0.4, Holding 0.1], High-pressure: 0.4*4(With indicator light only) [Inrush 0.95, Holding 0.4] | |||
| Surge Voltage Suppressor | Diode (varistor for non-polar type) | |||
| Indicator Light | LED | |||
- *As there are limitations to the operating environment of the metal seal, see precautions specific to the product.
*1: Use at 5 Hz or less with the energy saving circuit.
*2: Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
See applicable pages in the manufacturer's catalog for information regarding how to secure manifolds for the DIN rail mounted type.
*3: S, Z and T types (with energy saving circuit) may experience voltage drops caused by internal circuits. Use within the allowable voltage fluctuation range below.
- S and Z type: 24 V DC: -7% to +10%, 12 V DC: -4% to +10%
- T type: 24 V DC: -8% to +10%, 12 V DC: -6% to +10%
*4: See applicable pages in the manufacturer's catalog for details.
Product Features
Concentrates wiring, piping and operation on one side
Space-saving bottom piping (ports A and B)
1 body with two 3-port valves built-in
- 3-port valves on the A and B sides can operate independently.
- Use of 3-port valves allows for half the number of stations as required up to now.
- Can also be used as a 4-position, 5-port valve.
- A back-pressure check valve to prevent back pressure separately for the A and B sides is also available.
| Series | A side | B side |
|---|---|---|
| SY□A00 SY□A30 | N.C. valve | N.C. valve |
| SY□B00 SY□B30 | N.O. valve | N.O. valve |
| SY□C00 SY□C30 | N.C. valve | N.O. valve |
- *See the manufacturer's catalog for other valve structure drawings and drawings.