5-Port Solenoid Valve, Pilot Type, Metal Seal, Body Ported VFS1000 Series

Brand :

SMC

Caution

Product images may be representative. Refer to the manufacturer's catalog for details.

Product Description

- 5-Port Solenoid Valve, Pilot Type, Metal Seal, Body Ported VFS1000 Series from SMC.
- Series VFS includes 5 port pilot solenoid valves with metal seals.
- Manifold options: Base mounted or body ported types.
- Base mounted manifolds come in plug-in and non plug-in styles.
- Body ported manifolds available with bar or separate type bases.
- Port sizes range from 1/8 to 3/4 with Rc(PT), NPTF & G(PF) thread types.
- Various options available for customization.

Metal Seal: Body Ported Type 5-Port Pilot Type VFS1000 Series Specifications

VFS1320-□D-01 external appearance

VFS1220-□E-01 external appearance

VFS1120-□G-01 external appearance

VFS1120-□G-01-F external appearance

Valve Specifications	Fluid		Air
	Maximum Operating Pressure		1.0 MPa
	Minimum Operating Pressure	2 Position	0.1 MPa
	Minimum Operating Pressure	3 Position	0.15 MPa
	Guaranteed Proof Pressure		1.5 MPa
	Ambient Temperature and Operating Fluid Temperature		^*1 -10 to 60°C
	Lubrication		^*2 Not required
	Pilot Valve – Manual Operation		Non-locking push type (flush)
	Impact Resistance / Vibration Resistance		^*3 150/50 m/s²
	Enclosure		^*4 Dust-proof (IP50 equivalent)
Electrical Specifications	Coil Rated Voltage		100 V, 200 V AC (50/60 Hz), 24 V DC
	Allowable Voltage Fluctuation		-15% to +10% of rated voltage
	Coil Insulation Type		^*5 Class B or equivalent (130°C)
	Apparent Power (Power Consumption) AC	Starting	5.6 VA (50 Hz), 5.0 VA (60 Hz)
	Apparent Power (Power Consumption) AC	Holding	3.4 VA (2.1 W) / 50 Hz, 2.3 VA (1.5 W) / 60 Hz
	Power Consumption		1.8 W (2.04 W: with light and surge voltage suppressor)
	Electrical Entry		Grommet, grommet terminal Conduit terminal, DIN terminal

*1: Use dry air when at low temperatures.
*2: If lubricating, use turbine oil class 1 (ISO VG32).
*3: Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
*4: Based on JlS C 0920.
*1: Based on JIS C 4003.

Pilot Valve – Manual Operation	Non-locking push type (extended), locking type (tool required), locking type (lever)
Coil Rated Voltage	110 to 120 V, 220 V, 240 V AC (50/60 Hz)
Coil Rated Voltage	12 V, 100 V DC
Options	^*2: With light and surge voltage suppressor
Foot Bracket (with Screws)	Mountable to AXT626-10A and VFS1120 (single) only

*The grommet type is equipped with a surge voltage suppressor (lead wire body ported type), but no light.

Model

Configuration		Model		Piping connection port diameter	Flow Rate Characteristics						^*1: Maximum Operating Frequency CPM	^*2: Response Time ms	^*3: Weight kg
					1 → 4/2 (P → A/B)			4/2 → 5/3 (A/B → R1/R2)
					C (dm³/(s·bar))	b	Cv	C (dm³/(s·bar))	b	Cv
2 Position	Single	VFS1120	VFS1130	1/8	1.7	0.22	0.38	1.8	0.19	0.40	1,200	15 or less	0.18
2 Position	Double	VFS1220	VFS1230	1/8	1.7	0.22	0.39	1.8	0.19	0.40	1,200	13 or less	0.26
3 Position	Closed Center	VFS1320	VFS1330	1/8	1.6	0.20	0.37	1.8	0.20	0.41	600	20 or less	0.27
	Exhaust Center	VFS1420	VFS1430	1/8	1.7	0.18	0.38	1.9	0.19	0.44	600	20 or less	0.27
	Pressure Center	VFS1520	VFS1530	1/8	1.7	0.24	0.40	1.6	0.18	0.37	600	20 or less	0.27

*1: The minimum operating frequency is according to JIS B 8419:2010 (once per 30 days).
*2: Based on JIS B 8419:2010. (Value with supply pressure at 0.5 MPa)
*3: Value for grommet type.
*4: *1 and *2 assume controlled clean air.