3-Port Solenoid Valve, Direct Operated Poppet Type, Rubber Seal, VT325 Series
Caution
- Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details. - Product images may be representative. Refer to the manufacturer's catalog for details.
Product Description
Elastic body seal type solenoid valve.
[Features]
· Compact yet with a large valve capacity
・ External dimensions: W 55 × H 118 × D 53 mm (Grommet)
・ Six valve functions in one (Universal porting type)
・ Six valve functions can be obtained by selecting the piping port
・ It can be used freely such as N.C. specifications, N.O. specifications, divider specifications, selector specifications, etc.
・ It can be used in vacuum (-101.2 kPa) (Vacuum specification: VT/VO325V)
・ for manifold: VO325
・ The VT325 manifold is a B-mount type with a common exhaust type
3-Port Solenoid Valve, Direct Operated Poppet Type, Rubber Seal, VT325 Series Specifications
VT325-□□T external appearance
VT325-□□D external appearance
VT325-□□C external appearance
VT325-□□G external appearance
| Switching Method | Direct operation type 2-position single solenoid |
|---|---|
| Usable Fluids | Air |
| Operating Pressure Range | 0 to 1.0 MPa |
| Ambient Temperature and Operating Fluid Temperature | 5 to 50°C |
| Maximum Operating Frequency | 5 Hz |
| Response time*1 | 30 ms or less (at 0.5 MPa) |
| Lubrication | Not required (Use turbine oil class 1 ISO VG32, if lubricated) |
| Manual Operation | Non-locking, push type |
| Impact resistance / Vibration resistance*2 | 150/50 m/s2 |
| Enclosure | Dust-proof |
*1: Based on JIS B 8419:2010 dynamic performance test. (Coil temperature of 20°C, at rated voltage, with no surge voltage suppressor)
*2: Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunction occurred in 1 sweep test between 45 and 1,000 Hz. The test was performed in both energized and de-energized states in the axial and right angle directions of the main valve/armature. (Initial value)
Solenoid Specifications
| Electrical Entry | Grommet, conduit. DIN terminal Conduit terminal | |||
|---|---|---|---|---|
| Coil Rated Voltage | 100 V AC, 200 V 50/60 Hz, 24 V DC | |||
| Allowable Voltage Fluctuation | -15% to +10% of rated voltage | |||
| Apparent power*3 | AC | Starting | 50 Hz | 75 VA |
| 60 Hz | 60 VA | |||
| Holding | 50 Hz | 27 VA | ||
| 60 Hz | 17 VA | |||
| Power consumption*1 | DC | 12W | ||
*3: When rated voltage is applied
Flow Rate Characteristics / Weight Table
| Valve Model Numbers | Piping connection port diameter | Flow Rate Characteristics | Weight | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1→2 (P→A) | 2→3 (A→R) | 3→2 (R→A) | 2→1 (A→P) | |||||||||||
| C (dm3/(s·bar)) | b | Cv | C (dm3/(s·bar)) | b | Cv | C (dm3/(s·bar)) | b | Cv | C (dm3/(s·bar)) | b | Cv | Grommet | ||
| VT325 | 1/4 | 5.5 | 0.37 | 1.4 | 5.9 | 0.35 | 1.5 | 5.5 | 0.33 | 1.4 | 5.7 | 0.32 | 1.4 | 0.55 kg (For alternating current) 0.60 kg (For direct current) |
| VT325V (Vacuum specification) | ||||||||||||||
| VT325 | 3/8 | 5.5 | 0.37 | 1.4 | 6.1 | 0.37 | 1.6 | 5.7 | 0.34 | 1.4 | 6.6 | 0.25 | 1.5 | |
| VT325V (Vacuum specification) | ||||||||||||||
*Value for valve single unit. This will differ for the manifold. See manifold specifications in the manufacturer's catalog for details.
Structure Drawing
Structure drawing when not energized
In an non-energized state, the spool valve (3) is pushed upward with the reaction force of the spring (4), sealing (1) while (2) and (3) are opened.
Air flow direction: (1) ⇔ block, (2) ⇔ (3)
Structure drawing when energized
When the coil (6) is energized, the plunger (7) is attracted and through the overtravel assembly it pushes down the spool valve (3). As a result, (3) is sealed while (1) and (2) are opened.
Air flow direction: (1) ⇔ (2), (3) ⇔ block
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Body | Die-cast aluminum | Platinum silver |
| 2 | Cover | Die-cast aluminum | Platinum silver |
| 3 | Spool Valve | Aluminum, NBR | - |
Outline dimensional drawing
(Unit: mm)
Grommet (G) dimensional drawing
(Unit: mm)
Conduit (C) dimensional drawing
VT325 Series Manifold Specifications
Common exhaust type external appearance
Manifold specifications
- Manifold type: B mount
- Maximum number of valve stations: 17 *
- Compatible solenoid valve model: VO325-00□□(-Q)
*When there are 4 stations or more, apply pressure from both sides of the P port. Also, exhaust from R ports on both sides.
| Exhaust port type | Connecting part / Port size | Piping direction | ||||
|---|---|---|---|---|---|---|
| P | A | R | P | A | R | |
| Common | Base | Base | Base | Side | Side/Bottom | Side |
| 1/4 / 3/8 | 1/4 / 3/8 | 1/4 / 3/8 | ||||
Flow Rate Characteristics / Weight Table
| Valve Model Numbers | Flow Rate Characteristics | Weight | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1→2 (P→A) | 2→3 (A→R) | 3→2 (R→A) | 2→1 (A→P) | ||||||||||
| C (dm3/(s·bar)) | b | Cv | C (dm3/(s·bar)) | b | Cv | C (dm3/(s·bar)) | b | Cv | C (dm3/(s·bar)) | b | Cv | Grommet | |
| VO325 | 4.1 | 0.24 | 1.0 | 4.4 | 0.18 | 1.0 | 4.5 | 0.15 | 1.0 | 4.3 | 0.23 | 1.0 | 0.58 kg (For alternating current) 0.63 kg (For direct current) |
| VO325V (Vacuum specification) | |||||||||||||
Outline dimensional drawing
(Unit: mm)
Common exhaust type dimensional drawings
*The section enclosed in the dotted box (valve unit port positions) shows the bottom ported model.
(n: number of stations)
| Symbol | n | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| L1 | 131 | 177 | 223 | 269 | 315 | 361 | 407 | 453 | 499 |
| L2 | 111 | 157 | 203 | 249 | 295 | 341 | 387 | 433 | 479 |
Calculation: L1 = 46 n + 39, L2 = 46 n + 19
Precautions
- *1The bottom of the solenoid valve has a breather hole for the main valve. Take proper measures to prevent this hole from being blocked as this will lead to a malfunction. *Ordinarily, when the solenoid valve is mounted on a metal surface, it can breathe through the breather hole via the breather groove. However, if the surface on which it will be mounted is made of rubber, the rubber could deform and block the hole.
- *2Take proper measures to prevent dust and foreign matter from entering through unused ports, such as the exhaust port. The grommet portion contains a breather hole for the armature. Take proper measures to prevent dust or foreign matter from accumulating in this area.
Manifold specification specific product precautions
- *When mounting the valve on the manifold base, the mounting orientation is set. Mounting in the wrong direction may cause connected equipment to malfunction. When mounting, see the drawings in the manufacturer's catalog. The drawing is for the N.C. specification.
- *How to switch from N.C. specification to N.O. specification: The product is configured as N.C. specification at the time of shipment from the factory. Remove the 2 mounting screws of the required valve and rotate the valve main body 180° on the manifold base to change the valve from a N.C. specification to a N.O. specification. (Confirm that gaskets are mounted on the valve mounting surface at this time.) Tighten the screws sufficiently. Mounting screw tightening torque: 3 N⋅m
Other
*See the manufacturer's catalog for information other than that above.