Vacuum/Release Unit VQD1000-V Series
Caution
- Refer to the manufacturer's catalog for specifications and material details.
- The product images may be representative images only. Refer to the manufacturer's catalog for shape details.
Product Description
A vacuum/release module that does not require a restrictor circuit for release air.
[Features]
· Response speed 13 msec (at 500 mm*).
· 18.5 msec (at 1,000 mm*).
*Distance from module to the workpiece.
· Smooth detachment of workpieces without over-shoot.
· No workpiece blowout caused by release air.
· No need to adjust the timing when switching between vacuum and positive pressure (single signal control).
· N.O. specification (vacuum adhesion type when not energized) and N.C. specification (vacuum shut-off type when not energized) can be selected.
Vacuum/Release Unit VQD1000-V Series Specifications
VQD1000-V Series external appearance and structure
Specifications
| Valve Specifications | Valve Structure | Direct operated poppet type | ||
|---|---|---|---|---|
| Usable Fluids | Air | |||
| Operating Pressure Range | Suction (Negative Pressure) | 0 to -100 kPa | ||
| Release (Positive Pressure) | 0 to 0.7 MPa | |||
| Response Time | N.O. Specifications | Suction (OFF) | 2 ±1 msec | |
| Release (ON) | 4 ±1 msec | |||
| N.C. Specifications | Suction (ON) | 4 ±1 msec | ||
| Release (OFF) | 2 ±1 msec | |||
| Suction Flow Rate / Sonic Conductance | 16 L/min / 0.27 dm3/(s·bar) | |||
| Manual Operation | Non-locking push type | |||
| Impact/Vibration Resistance | 150/30 m/s2 | |||
| Mounting Orientation | Free | |||
| Enclosure | Dust-proof | |||
| Electrical Specifications | Coil Rated Voltage | 24, 12 V DC | ||
| Allowable Rated Voltage Fluctuations | ±10% of rated voltage | |||
| Coil Insulation Type | Class B equivalent | |||
| Power Consumption | VQD1151W (For Switching) | 3.2 W energy-saving type (startup: 3.2 W, holding: 1.0 W) | ||
| Electrical Entry | L-type, M-type plug connector (with light / surge voltage suppressor) | |||
Drawing
(Unit: mm)
VQD1000-V Series dimensional drawing 1
VQD1000-V Series dimensional drawing 2
VQD1000-V Series dimensional drawing 3
Dimensions in parenthesis are for the VQD1000-V(C)L-□□ / tank volume: 3.2 cm3.
L: Dimensions Table
VQD1000-V(C)-□□ / standard type: tank capacity 0.8 cm3
| L | n | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| L1 | 23 | 34 | 45 | 56 | 67 | 78 | 89 | 100 | 111 | 122 |
| L2 | 17 | 28 | 39 | 50 | 61 | 72 | 83 | 94 | 105 | 116 |
General type: L1 = 11n + 12, L2 = 11n + 6 (max. 10 stations)
VQD1000-V(C)L-□□ / tank capacity 3.2 cm3
| L | n | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| L1 | 25 | 36 | 47 | 58 | 69 | 80 | 91 | 102 | 113 | 124 |
| L2 | 19 | 30 | 41 | 52 | 63 | 74 | 85 | 96 | 107 | 118 |
General type: L1 = 11n + 14, L2 = 11n + 8 (max. 10 stations)
Replacement Parts
Replacement parts structural drawing
- 1. Solenoid valve for switching
- 2. Solenoid valve for release air charging (*A port pressurized filling specifications. Using a standard product may cause external leakage.)
- 3. Manifold base module
- 4. Blanking plate assembly (*The blanking plate assemblies for the solenoid valve for switching and solenoid valve for release air charging are each 1 set.)
Product Weight (Calculation)
- VQD1000-V(C): W = 80n + 31
- VQD1000-V(C)L: W = 84n + 49
W: weight (g)
n: number of stations
Working Principle (N.O. Specifications)
When not energized (vacuum suction)
Two solenoid valves are de-energized simultaneously.
Release air is charged while the workpiece is being held.
When energized (release → shut-off)
Two solenoid valves are energized simultaneously.
The release air is discharged, the pressure matches that of the atmosphere, and the workpiece is smoothly released.
Product Specific Notes
Manual Operation
VQD1151W-□ (for switching)
· Non-locking push type (tool required)
If pressed until it reaches the direction of the arrow (approx. 0.5 mm) it will turn ON. Release to turn OFF.
*If using manual operation, connected devices will operate. Check for dangers before proceeding.
Wiring Specifications
10-VQ110-□-X46 (for release air charging)
The figure shows the VQD1151W (energy-saving type). Current consumption when holding is reduced by the circuit, helping save power.
Using the Plug Connector
- To attach a connector, hold the lever and connector unit between your fingers and insert straight into the pins. Push the claw of the lever into the groove in the cover to lock.
- To detach a connector, remove the claw from the groove by pushing down the lever with your thumb and then pull the connector straight out.
Connector removal
*Do not use excessive force when pulling the lead wire. Doing so may cause contact failure or disconnection.
Notes
- *Refer to the manufacturer's catalog for product information not detailed above.
- The product images are representative images only.