Pressure Sensor For General Fluids PSE570 Series
Caution
- Product images may be representative images. Refer to the manufacturer's catalog for details
Product Description
[Features]
· Withstand voltage: 500 V AC
· IP65 enclosure
· Wetted parts material
Piping port: C3604 + nickel plating
Pressure sensor pressure receiving area: Al2O3 (Alumina 96%)
O-ring: FKM + Grease (PSE570/573/574)
Square ring: FKM (PSE575/576/577)
Specifications of General-Purpose Fluid Pressure Sensor PSE570 Series
External appearance of general-purpose fluid pressure sensor PSE570 Series
External appearance of lead wire with M12 connector (3 m) straight
External appearance of lead wire with M12 connector (3 m) right angle
| Model | PSE570 | PSE573 | PSE574 | PSE575 | PSE576 | PSE577 | |
|---|---|---|---|---|---|---|---|
| Fluid | Fluid | Gases and liquids that do not corrode wetted parts material | |||||
| Pressure Specification | Rated pressure range | 0 to 1 MPa | -100 to +100 kPa | 0 to 500 kPa | 0 to 2 MPa | 0 to 5 MPa | 0 to 10 MPa |
| Withstand pressure | 3.0 MPa | 600 kPa | 1.5 MPa | 5.0 MPa | 12.5 MPa | 30 MPa | |
| Electrical Specifications | Power supply voltage | 12 to 24 V DC ±10% and power supply ripple 10% or less | |||||
| Current Consumption | 10 mA or less | ||||||
| Protection | Reverse connection protection | ||||||
| Accuracy | Analog output accuracy (Ambient temperature 25°C) | ±1.0% F.S. | ±2.5% F.S. | ||||
| Linearity | ±0.5% F.S. | ||||||
| Repeatability (Ambient temperature 25°C) | ±0.2% F.S. | ±0.5% F.S. | |||||
| Temperature characteristics (reference: 25°C) | ±2%F.S. (0 to 50℃) ±3%F.S. (-10～+60℃) | ±3%F.S. (0 to 50℃) ±4%F.S. (-10～+60℃) | ±5%F.S. (-10～+60℃) | ||||
| Environment | Protection grade | IP65 | |||||
| Withstand Voltage | 500 V AC for 1 minute between terminals and housing | ||||||
| Insulation Resistance | 100 MΩ or more (500 V DC measured via insulation resistance tester) between terminals and housing | ||||||
| Operating temperature range | During operation: -10 to +60°C, during storage: -20～+70℃ (No condensation or freezing) | ||||||
| Operating Humidity Range | Operating/stored: 35 to 85% RH (no condensation) | ||||||
| Standards | CE | ||||||
| Wetted parts material | Piping port: C3604 + nickel plating, pressure sensor pressure receiving part: Al2O3 (alumina 96%), O-ring: FKM + grease | Piping port: C3604 + nickel plating, pressure sensor pressure receiving part: Al2O3 (alumina 96%), square ring: FKM | |||||
| Model | PSE57□-□ | PSE57□-□-28 | |
|---|---|---|---|
| Analog output | Output Type | Voltage Output: 1 to 5 V | Current Output: 4 to 20 mA |
| Impedance | Output Impedance: Approx. 1 kΩ | Maximum load impedance: 500 Ω or less (24 V power supply) 100 Ω or less (Power supply 12 V) | |
Cable material specifications
| Conductor | Nominal cross-sectional area | AWG23 |
|---|---|---|
| Outer diameter | 0.72 mm | |
| Insulator | Material | Cross-linked PVC |
| Outer diameter | 1.14 mm | |
| Hue | Brown, blue, black, white | |
| Sheath | Material | Oil Resistant Vinyl Chloride |
| Finishing Outer Diameter | ø4 (Finishing outer diameter is 4 mm) | |
| Length | 3 m | |
Piping specifications
| Part number | PSE570／573／574-01 | PSE570／573／574-02 | PSE575／576／577-02 | |
|---|---|---|---|---|
| Port Size | R1/8 M5 × 0.8 | R1/4 M5 × 0.8 | R1/4 M5 × 0.8 | |
| Wetted parts material | Piping port: C3604 + nickel plating pressure sensor pressure receiving area: Al_2 O_3 (Alumina 96%) O-ring: FKM + grease | Piping port: C3604 + nickel plating pressure sensor pressure receiving area: Al_2 O_3 (Alumina 96%) Square ring: FKM | ||
| Weight | Excluding Lead wire with M12 connector | 88 g | 95 g | 103 g |
| Including lead wire with M12 connector | 175 g | 182 g | 191 g | |
Internal Circuit and Connection
Internal circuit and wiring example of PSE57□-□
Voltage output type: 1 to 5 V
Output Impedance: Approx. 1 kΩ
* Since the unconnected terminals are for the manufacturer, connection should be avoided.
Internal circuit and wiring example of PSE57□-□-28
Current output type: 4 to 20 mA
Allowable load impedance: 500 Ω or less (at 24 V power supply) / 100 Ω or less (At power supply 12 V)
Dimensions
(Units: mm)
Dimensional drawing of pressure sensor for general-purpose fluid PSE570 Series
| Part number | A | B | C |
|---|---|---|---|
| PSE570／573／574-01 | 8 | R1/8 | 36.5 |
| PSE570／573／574-02 | 12 | R1/4 | 36.5 |
| PSE575／576／577-02 | 12 | R1/4 | 39.7 |
Lead wire with M12 connector
Specifications
- ZS-37-A: Straight type 3 m
- ZS-37-B: Right angle type 3 m
Pin no.
- Pin number 1: Lead wire color, brown/DC (+)
- Pin Number 2: Lead wire color, white/N.C. *
- Pin Number 3: Lead wire color, blue/DC (-)
- Pin Number 4: Lead wire color, black/OUT1
* Since the unconnected terminals are for the manufacturer, connection should be avoided.
(Units: mm)
Dimensional drawing of ZS-37-A
Dimensional drawing of ZS-37-B
Notes
- * If sudden pressure fluctuations such as water hammer and surge pressure are expected, check the handling precautions in the instruction manual.
- *See the SMC catalog for information other than that detailed above.