Space Saving Vacuum Ejector ZQ Series (ZQ105/ZQ107/ZQ110)

Brand :

SMC

Caution

The product images are representative images only. Refer to the manufacturer's catalog for shape details.

Product Description

Easy-to-use vacuum pressure switch.
[Features]
・ Improved operability with push button type
・ Vacuum pressure switch with LED display function
・ Up to 10 units can be copied simultaneously
・ The setting value of the master side (copy source) sensor can be copied to the slave side sensor
・ Reduction of setting labor-hours
・ Reduces setting value input errors

Space Saving Vacuum Ejector ZQ Series Specifications

Space Saving Vacuum Ejector ZQ Series external appearance 1

Space Saving Vacuum Ejector ZQ Series external appearance 2

Ejector Specifications

Model		ZQ105	ZQ107	ZQ110
Nozzle Diameter (mm)		0.5	0.7	1.0
Maximum Suction Flow Rate L/min (ANR)		5	10	22
Air Consumption L/min (ANR)		14	23	46
Maximum Vacuum Pressure		-80 kPa
Supply Pressure Range	Air Pressure Supply (P) Port	0.3 to 0.5 MPa (For normally open type: 0.3 to 0.45 MPa)
Supply Pressure Range	Release Pressure Supply (PD) Port	0.3 to 0.5 MPa (For normally open type: 0.3 to 0.45 MPa) And PD pressure ≥ P pressure
Standard Supply Pressure ^Note:		0.35 MPa	0.43 MPa
Operating Temperature Range		5 to 50°C
Usable Fluids		Air

Note: The maximum suction flow rate was obtained at the standard supply pressure.

Product Weight

With suction filter (single unit): 95 g (*1)
With vacuum pressure switch + suction filter (single unit): 109 g (*2)
End plate assembly for manifold: 122 g

*1 Includes 0.3-m connector for supply valve and release valve.
*2 Includes a 0.3‑m connector for supply valve and release valve and a 2‑m connector for vacuum pressure switch.

Manifold Type Weight Calculation

(Unit weight) × number of stations + (weight of end plate assembly for manifold)
Example: Eight stations with a vacuum pressure switch and suction filter
109 g × 8 + 122 g = 994 g

Product Supply And Release Valves

Type		Normally Closed Type		Latching Type	Normally Open Type
Type		Standard Type (1 W)	Low Wattage Type (0.5 W)	Latching Type	Normally Open Type
Model (Refer to the section on ordering solenoid valves on p. 107)		VQ110-□	VQ110Y-□	VQ110L-□ VQ110N-□	ZQ1-VQ120-□
Manual Operation		Non-locking push type / locking type (tool required)		Push-lock type	Non-locking push type / locking type (tool required)
Coil Rated Voltage		12/24 V DC, 100/110/200/220 V AC	12/24 V DC	12/24 V DC, 100/110/200/220 V AC	12/24 V DC
Power Consumption (Current Value)	DC	1 W	0.5 W	1 W
	AC 100 V	0.5 VA (5 mA)	-	0.6 VA (6 mA)	-
	110 V AC	0.55 VA (5 mA)	-	0.65 VA (5.9 m)	-
	200 V AC	1.0 VA (5 mA)	-	1.2 VA (6 mA)	-
	220 V AC	1.1 VA (5 mA)	-	1.3 VA (5.9 mA)	-
Electrical Entry		Grommet, L-type plug connector (with light / surge voltage suppressor)		L-type plug connector (With light / surge voltage suppressor)	Grommet, L-type plug connector (With light / surge voltage suppressor)

Vacuum Pressure Switch Specifications

Model			ZQ1-ZSE (ZSE10)	ZQ1-ZSE (ZSE10F)
Rated Pressure Range			0 to -101 kPa	-100 to 100 kPa
Set Pressure Range / Display Pressure Range			10 to -105 kPa	-105 to 105 kPa
Withstand Pressure			500 kPa
Minimum Setting Unit			0.1 kPa
Power Supply Voltage			12 to 24 V DC ±10%, ripple (p-p) 10% or less (with power supply polarity protection)
Current Consumption			40 mA or less
Switch Output	-		NPN or PNP open collector 2 outputs (selectable)
	Maximum Load Current		80 mA
	Maximum Applied Voltage		28 V (with NPN output)
	Residual Voltage		2 V or less (with load current of 80 mA)
	Response Time		2.5 ms or less (with anti-chattering function: 20, 100, 500, 1,000, 2,000 ms selectable)
	Short Circuit Protection		Equipped
Repeatability			±0.2% F.S. ±1 digit
Hysteresis	Hysteresis Mode		Variable from 0 ^{Note 1:}
Hysteresis	Window Comparator Mode		Variable from 0 ^{Note 1:}
Analog Output	Voltage Output	Output Voltage (Rated Pressure Range)	1 to 5 V ±2.5% F.S.
		Linearity	±1% F.S. or less
		Output Impedance	Approx. 1 k Ω
Display System			3 1/2-digit, 7-segment LED, 1 color display (red)
Display Accuracy			±2% F.S. ±1 digit (with ambient temperature of 25°C ±3°C)
Operation Indicator Light			Lights when ON, OUT1: green, OUT2: red
Environmental Resistance	Enclosure		IP40
	Operating Humidity Range		Operating/stored: 35 to 85% RH (no condensation)
	Withstand Voltage		1,000 V AC for 1 min. between live parts and housing
	Insulation Resistance		50 MΩ or more (500 V DC measured with megohmmeter) between live parts and housing
Temperature Characteristics			±2% F.S. (at 25°C of operating temperature range: -5 to +50°C)
Lead Wires			Oil-resistant cabtire cord Conductor cross-sectional area: 0.15 mm² (AWG26), 5 cores, 2 m, insulator outer diameter: 1.0 mm

Note 1: If the applied voltage fluctuates around the set value, the hysteresis must be set to a value more than the width of the fluctuations or chattering will occur.
Note 2: For specifications not listed, ejector specifications apply.

Product Exhaust Characteristics

ZQ105 exhaust characteristics

ZQ107 exhaust characteristics

ZQ110 exhaust characteristics

Single Unit and Manifold Structural Drawing / Components and Replacement Parts

Single unit structural drawing

Manifold structural drawing

Components

Number	Part Name	Material
1	Poppet Valve Assembly	-
2	Nozzle	Resin
3	Diffuser	Resin
4	Vacuum Break Flow Adjusting Needle	Stainless steel

Replacement Parts

Number	Part Name	Material	Part number
5	Solenoid valve	-	Refer to p. 107 for details
6	Filter Element	PVA sponge	XT534-5-001-AS
7	Sound absorption material 1 (for single units)	PVA sponge	ZQ-SAE
8	Vacuum Pressure Switch	-	Refer to p. 107 for details
9	Fitting	-	-
10	Sound absorption material 2 (for manifolds)	PVA sponge	ZZQ-SAE

Product Drawings

(Unit: mm)

J1 Type ZQ1□1U-J1□□□□-□□□□□-□□

J1 type ZQ1□1U-J1□□□□-□□□□□-□□ dimensional drawing

J1 type ZQ1□1U-J1□□□□-□□□□□-□□ circuit diagram

Note 1: Drawing is of the ZQ1□1U-J1□5/6L-E□□G□-00. For the ZQ1□1U-J1□□□□-F□-00, the overall length is 87.2 mm.
Note 2: The dimensions after bracket A is mounted are the same as those of the K1 type.
Note 3: When mounting the body, tighten to a torque of 0.6 ±0.06 N·m. Using excessive torque may cause damage to the body.
Note 4: For the ZQ series, the pitches of the P, V and PE ports are determined assuming the use of one-touch fittings.
If used with other fittings, these may cause interference, dependent on their type and size. Refer to the manufacturer's catalog to confirm the sizes of the fittings before use.

Manifold Type Increase/Decrease Method

Components

Number	Part Name	Part Number
1	Hexagon Socket Head Cap Screw	See the section on ordering below
2	End Block L	See Table 1 (includes (6) × 1 pc.)
3	End Block R	See Table 1 (includes (5) × 1 pc.)
4	Ejector Assembly	ZQ1□□3M-□□□□□□-□□□□□-□(-Q) ^{Note 1:} (Includes (5) and (6) × 1 of each)
5	Ejector Body Gasket for Manifolds	ZQ-3-005-10AS ^{Note 2:}
6	Gasket for Exhaust Block	ZQ-3-009-10AS ^{Note 2:}

Note 1: Refer to pp. 102–103 of the manufacturer's catalog for details on ordering.
Note 2: This part number is a 10-piece set.

Table 1

Part Name	With PD Port	Without PD Port
End Block L	ZQ1L-2-BSB-AS	ZQ1L-1-BSB-AS
End Block R	ZQ1R-2-BSB-AS	ZQ1R-1-BSB-AS

Working Procedure

Disassembly

Loosen and remove clamp rod (1).

Assembly

1. Install the ejector body gasket for manifolds (5) into the gasket groove of each ejector assembly (4). Install the exhaust block gasket (6) around the projected part.
2. Install the exhaust block gasket (6) around the projected part of end block L (2).
3. Install the ejector body gasket for manifolds (5) into the gasket groove of end block R (3).
4. Align the ejector assembly (4), end block L (2) and end block R (3) using locating pins (at the 2 'a' positions) and fasten with the clamp rods (1) (× 2 pcs.) (Tightening torque: 0.6 N·m ±0.06 N·m)

*Refer to the manufacturer's catalog for product information not detailed above.