Compact Vacuum Unit ZB Series
Caution
- The product images are representative images only. Please refer to the manufacturer's catalog for details of the types available
Product Description
[Features]
· Quick response: valve response time of 5 ms, vacuum response time of 28 ms
· Energy-saving: 17% reduction in air consumption, 21% increase in vacuum pressure reached
· Compact and lightweight: 46 g
· Equipped with vacuum pressure switch; can copy up to 10 switches simultaneously
Compact Vacuum Unit ZB Series Specifications
Compact Vacuum Unit ZB Series external appearance
0: Without exhaust port for vacuum pump system (without silencer)
1: Silencer exhaust (individual exhaust)
2: Port exhaust (individual exhaust)
General Specifications
| Operating Temperature Range | -5 to +50°C (no condensation) |
|---|---|
| Usable Fluids | Air |
| Vibration Resistance Note 1: | 30 m/s2 (without sensor/switch, with sensor) 20 m/s2 (with switch) |
| Impact Resistance Note 2: | 150 m/s2 (without sensor/switch, with sensor) 100 m/s2 (with switch) |
Note 1: 10 to 500 Hz for 2 hours in each of the X, Y and Z directions (during de-energizing)
Note 2: 3 times in each of the X, Y and Z directions (during de-energizing)
Supply Valve / Release Valve Common Specifications
| Valve Structure | 3-port direct operated poppet valve | |
|---|---|---|
| Lubrication | Not required | |
| Manual Override Note: | Non-locking push type / locking type (tool required) | |
| Enclosure | Dust-proof | |
| Coil Rated Voltage | DC | 24 V, 12 V |
| Allowable Voltage Fluctuation | ±10% of rated voltage | |
Note: Push-lock type only for the latching type.
Ejector Specifications Note 1:
| Model | ZB03 | ZB04 | ZB05 | ZB06 | ||
|---|---|---|---|---|---|---|
| Supply Valve Type | Large flow (N.C.) | Latching type | Large flow (N.C.) | Latching type | Large flow (N.C.) | Large flow (N.C.) |
| Nozzle Diameter (mm) | 0.3 | 0.4 | 0.5 | 0.6 | ||
| Supply Pressure Range Note 2: (MPa) | 0.2 to 0.55 | 0.3 to 0.55 | ||||
| Standard Supply Pressure (MPa) | 0.35 | 0.4 | 0.35 | 0.45 | 0.35 | 0.5 |
| Air Consumption L/min (ANR) | 3.5 | 4 | 6.5 | 8.5 | 10 | 18 |
| Maximum Suction Flow Rate L/min (ANR) | 2 | 3.5 | 4.5 | 7 | ||
| Maximum Vacuum Pressure (kPa) | -86 | -90 | ||||
Note 1: These values are representative values and may vary depending on the atmospheric pressure (weather, altitude, etc.)
Note 2: The maximum operating pressure is 0.5 MPa when using the product with either a pressure sensor or vacuum pressure switch.
Suction Filter Specifications
- Filtration degree: 30 μm
- Filtration area: 130 mm2
Drawing / Single Unit Specification
Ejector / Vacuum Pump System: Silencer Exhaust, With Supply Valve / Release Valve, Without Sensor/Switch
(Unit: mm)
ZB□10/11/20/21-K1/Q1□L(O)/M(O)□-□ dimensional drawing
Ejector (ZB□11-K1□□□-□) / Vacuum Pump System (ZB0020-K1□□□-□) circuit diagram
| Port Type | A | B |
|---|---|---|
| C2 | 4.1 | 78.5 |
| C4 | 7.5 | 81.9 |
| N1 | 7.4 | 81.8 |
| N3 | 7.5 | 81.9 |
| L2 | 8.4 | 82.8 |
| L4 | 8.3 | 82.7 |
| LN1 | 8.3 | 82.7 |
| LN3 | 8.3 | 82.7 |
- *1 For PV = PD specifications, without port.
- *2 For ejectors, do not block the exhaust port when mounting. When the product is mounted so that the exhaust port side will be against a wall, use a spacer to secure a clearance of at least 1 mm. (Refer to the manufacturer's catalog for details) For the pump system, no exhaust port.
- *3 The dotted line shows the configuration of the latching type and the manual lock type.
- *4 The dotted line shows the configuration of the manual lock type.
- *5 For L-type plug connectors.
- *6 For M-type plug connectors.
- *7 There are 3 lead wires for the latching type.
- *8 Refer to the manufacturer's catalog for the external dimensions of the vacuum (V) ports by type.
Ejector / Vacuum Pump System: Silencer Exhaust, With Supply Valve Only, Without Sensor/Switch
(Unit: mm)
ZB□10/11-J1/Q2□L(O)/M(O)□-□ dimensional drawing
Ejector (ZB□11-J1□□□-□) / Vacuum Pump System (ZB0010-J1□□□-□) circuit diagram
| Port Type | A | B |
|---|---|---|
| C2 | 4.1 | 78.5 |
| C4 | 7.5 | 81.9 |
| N1 | 7.4 | 81.8 |
| N3 | 7.5 | 81.9 |
| L2 | 8.4 | 82.8 |
| L4 | 8.3 | 82.7 |
| LN1 | 8.3 | 82.7 |
| LN3 | 8.3 | 82.7 |
- *1 For ejectors, do not block the exhaust port when mounting. When the product is mounted so that the exhaust port side will be against a wall, use a spacer to secure a clearance of at least 1 mm. (Refer to the manufacturer's catalog for details) For the pump system, no exhaust port.
- *2 The dotted line shows the configuration of the latching type and the manual lock type.
- *3 For L-type plug connectors.
- *4 For M-type plug connectors.
- *5 There are 3 lead wires for the latching type.
- *6 Refer to the manufacturer's catalog for the external dimensions of the vacuum (V) ports by type.
Ejector / Vacuum Pump System: Silencer Exhaust, With Supply Valve / Release Valve, With Pressure Sensor
ZB□10/11/20/21-K1/Q1□L(O)□-P1/3-□ dimensional drawing
Ejector (ZB□21-Q1□L(O)□-P1/3-□) / Vacuum Pump System (ZB0020-K1□L(O)□-P1/3-□) circuit diagram
| Port Type | A | B |
|---|---|---|
| C2 | 4.1 | 92.6 |
| C4 | 7.5 | 96 |
| N1 | 7.4 | 95.9 |
| N3 | 7.5 | 96 |
| L2 | 8.4 | 96.9 |
| L4 | 8.3 | 96.8 |
| LN1 | 8.3 | 96.8 |
| LN3 | 8.3 | 96.8 |
- *1 For PV = PD specifications, without port.
- *2 For ejectors, do not block the exhaust port when mounting. When the product is mounted so that the exhaust port side will be against a wall, use a spacer to secure a clearance of at least 1 mm. (Refer to the manufacturer's catalog for details) For the pump system, no exhaust port.
- *3 The dotted line shows the configuration of the latching type and the manual lock type.
- *4 The dotted line shows the configuration of the manual lock type.
- *5 Refer to the manufacturer's catalog for the external dimensions of the vacuum (V) ports by type.
- *6 For units with a vacuum pressure switch, M-type plug connectors are not available.
*See the manufacturer's catalog for information not detailed above.