Stainless Steel Cylinder CJ5-S Series
Caution
- See catalog for specification details.
- CAD data is not supported for some model numbers.
- Product pictures are representations.
Product Description
[Features]
· Compatible with use in environments with water splashing, such as in food processing, etc.
· For use with grease for food processing (NSF-H1 certified product)
· Stainless steel (SUS304) is used for all external parts, improving resistance to corrosion even in environments with exposure to water
· A special scraper (standard equipment) prevents water from entering the cylinder
· NBR or FKM seals can be chosen to suit the application
Model Number Notation
Model Number Notation
Stainless Steel Cylinder CJ5-S Series Features
Stainless Steel Cylinder CJ5-S Series External Appearance
Stainless steel CJ5 S Series JIS symbol (double acting, single rod, rubber cushion)
External configuration that reduces liquid pooling
- Electrolytic polishing is carried out on the surface of the mounting brackets to make them smoother and prevent adhesion of liquids and contaminants.
- Provide plugs for unused mounting threads (CG5, S Series) to prevent accumulation of liquid in the mounting parts.
Specifications
| Tube Inner Diameter (mm) | 10 | 16 |
|---|---|---|
| Operating Method | Double acting, single rod | |
| Applicable Fluids | Air | |
| Proof Pressure | 1 MPa | |
| Maximum Operating Pressure | 0.7 MPa | |
| Minimum Operating Pressure | 0.1 MPa | |
| Ambient Temperature and Operating Fluid Temperature | Without auto switch: -10°C to +70°C, with auto switch: -10°C to +60°C | |
| Cushion | Rubber cushion | |
| Lubrication | Not required (non-lubricated) | |
| Stroke length tolerance | +1.0 0 | |
| Piston Speed | 50 to 750 mm/s | |
| Allowable Kinetic Energy | 0.035 J | 0.090 J |
| Mounting Support Type | Basic type, axial foot type, rod-end flange type, double clevis type | |
Standard Stroke Table
(Unit: mm)
| Tube Inner Diameter | Standard Stroke | Maximum Manufacturable Stroke |
|---|---|---|
| 10 | 15, 30, 45, 60, 75, 100, 125, 150 | 400 |
| 16 | 15, 30, 45, 60, 75, 100, 125, 150, 175, 200 |
- * Manufacture of intermediate strokes at 1‑mm increments is possible. (Spacers are not used.)
- * See mounting minimum stroke for auto switch mounting. (P. 1,077)
Structural Drawing (*Cannot be Disassembled)
Structural Drawing
Components
| Number | Name | Material | |
|---|---|---|---|
| 1 | Rod cover | SUS304 | |
| 2 | Head cover | SUS304 | |
| 3 | Cylinder tube | SUS304 | |
| 4 | Piston rod | SUS304 | |
| 5 | Mounting nut | SUS304 | |
| 6 | Rod end nut | SUS304 | |
| 7 | Label protective sheet | PET | |
| 8 | Water-resistant scraper | CJ5□□SR | NBR |
| CJ5□□SV | FKM | ||
*The material and surface treatment of component parts other than those listed above are the same as the standard type in the CJ2 Series.
Drawing
Basic Type (B) / C□J5B□SR / V
Basic Type (B) / C□J5B□SR / V Drawing
(Unit: mm)
| Tube Inner Diameter (mm) | A | BA | BB | CA | CB | D | F | GA | GB | H | MM | NN | NA | NB | NDh8 | S | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 15 | 15 | 12 | 17 | 14 | 4 | 8 | 8 | 5 | 28 | M4 × 0.7 | M10 × 1.0 | 12.5 | 9.5 | 10(-0.022 to 0) | 46 | 74 |
| 16 | 15 | 18.3 | 18.3 | 20 | 20 | 5 | 8 | 8 | 5 | 28 | M5 × 0.8 | M12 × 1.0 | 12.5 | 9.5 | 12(-0.027 to 0) | 47 | 75 |
Axial Foot Type (L) / C□J5L□SR / V
Axial Foot Type (L) / C□J5L□SR / V Drawing
(Unit: mm)
| Tube Inner Diameter (mm) | A | BA | BB | CA | CB | D | F | GA | GB | H | LB | LC | LH | LT | LX | LY | LZ | MM | NN | NA | NB | S | X | Y | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 15 | 15 | 12 | 17 | 14 | 4 | 8 | 8 | 5 | 28 | 21.5 | 5.5 | 14 | 2.5 | 33 | 25 | 42 | M4 × 0.7 | M10 × 1.0 | 12.5 | 9.5 | 46 | 6 | 9 | 74 |
| 16 | 15 | 18.3 | 18.3 | 20 | 20 | 5 | 8 | 8 | 5 | 28 | 23 | 5.5 | 14 | 2.5 | 33 | 25 | 42 | M5 × 0.8 | M12 × 1.0 | 12.5 | 9.5 | 47 | 6 | 9 | 75 |
- * Refer to p. 1,068 of the manufacturer's catalog for other models' drawings, specifications, etc.
