Electrostatic Sensor Monitor, IZE11 Series

Brand :

SMC

Caution

Please refer to the manufacturer's catalog for specification details.
Product images may be representative images. Refer to the manufacturer's catalog for shape details.

Product Description

RoHS-compliant electrostatic sensor monitor that can be vertically or horizontally mounted.
[Features]
· Minimum unit setting: 0.001 kV (at ±0.4 kV), 0.1 kV at ±20 kV).
· Display accuracy: ±0.5% F.S. ±1 digit or less.
· Detection distance correction function (adjustable in 1 mm increments).
· Supports two types of sensors (±0.4 kV, ±20 kV) using range selection.
· 2-color (Red/Green) display.
· Connection by connector.
· Peak/Bottom value display.
· Key lock function.

Electrostatic Sensor Monitor, IZE11 Series Specifications

IZE11 Series external appearance

Connection by connector

Sensors can be mounted so that they are in contact vertically and horizontally, reducing time and labor required for panel cutting

Product dimension: □30 mm

2-color red and green display can be set to 4 display color patterns

Pattern	ON	OFF
(1)	Red	Green
(2)	Green	Red
(3)	Red	Red
(4)	Green	Green

Model			IZE11□
Connection Sensor			IZD10-110	IZD10-510
Rated Measurement Range			-0.4 kV to +0.4 kV^*1	-20kV to +20kV^*2
Minimum Unit Setting			0.001 kV	0.1 kV
Measurement Distance Setting			10 to 50 mm	25 to 75 mm
Power Supply Voltage			21.6 to 26.4 V DC (24 V DC ±10% or less, with power supply polarity protection)
Current Consumption			50 mA or less (excluding sensor unit current consumption)
Sensor Input			1 to 5 V DC (Input impedance: 1 MΩ)
-	Number of Inputs		1 input
	Input Protection		With excess voltage protection (up to 26.4 V)
	Hysteresis		Hysteresis mode: Variable Window comparator mode: Variable
Switch output			NPN or PNP open collector: 2 outputs
-	Max. Load Current		80 mA
	Max. Applied Voltage		30 V DC (with NPN output)
	Residual Voltage		1 V or less (with load current of 80 mA)
	Short Circuit Protection		With short circuit protection
	Response Time (Including Sensor Response Time)		100 ms or less Response time with anti-chattering function: 500 ms, 1 s, 2 s or less
Analog Output	Voltage Output		Output voltage: 1 to 5 V (in accordance with rated measurement range), Output impedance: Approx. 1 k Ω
	-	Accuracy (for Readings) (25°C)	±1% F.S.
	Current Output		Output current: 4 to 20 mA (in accordance with rated measurement range) Max. load impedance: 600 Ω (at 24 V DC, Min. load impedance: 50 Ω
	-	Accuracy (for Readings) (25°C)	±1% F.S.
	Response Time (Including Sensor Response Time)		200 ms (without filter), 1.5 s (with filter) or less
Display Accuracy			±0.5% F.S. ±1 digit
Display Method			3 + 1/2 digit, 7-segment indicator, 2-color display (Red/Green) Sampling cycle: 5 times/s
Operation Indicator Light			OUT1: Illuminates when output is turned ON (Green), OUT2: Illuminates when output is turned ON (Red)
Environmental Resistance	Enclosure		IP40
	Operating Temperature Range		Operating: 0 to 50°C, Stored: -10 to +60°C (with no freezing or condensation)
	Operating Humidity Range		Operating/stored: 35 to 85% R.H. (with no condensation)
	Withstand Voltage		1,000 V AC for 1 min, between live parts and housing
	Insulation Resistance		50 MΩor more (with 500 V DC measured via megohmmeter), between live parts and housing
	Vibration Resistance		10 to 150 Hz at amplitudes and accelerations smaller than 1.5 mm and 98 m/s² respectively, in X, Y and Z directions (de-energized)
	Impact Resistance		100 m/s² in X, Y, Z directions 3 times each (de-energised)
Temperature Characteristics			±0.5% F.S. (based on 25°C)
Connection Method			Power supply, Output connection: 5-pin connector, Sensor connection: 4-pin connector
Material			Front case: PBT, Rear case: PBT
Weight	Excluding Power Supply and Output Connection Cable		30 g
Standards			CE marking, UL (CSA) compliant

*1: Rated value when the distance between the charged object and the sensor is 25 mm
*2: Rated value when the distance between the charged object and the sensor is 50 mm

Function Names and Descriptions

IZE11 Series part names

Dimensional Outline Drawing

(Unit: mm)

IZE11 Series dimensional drawing

(Unit: mm)

Power supply / output connection cable dimensional drawing

Structural diagram of connector for sensor connection

Connector for sensor connection terminal names

PIN No. 1: DC (+)
PIN No. 2: N.C.
PIN No. 3: DC (-)
PIN No. 4: IN (1 to 5 V)

(Unit: mm)

Dimensional drawing with bracket

(Unit: mm)

Dimensional drawing with panel mount adapter

Specific Product Precautions

*Ensure that you read the "Safety Precautions" and "Common/Specific Product Precautions" prior to use.
*Product images are representative images. These images may differ from the actual products.
*Refer to the catalog for further information.