Speed Controller Adjustable By Straight-Slot Screwdriver, Standard Type, Metal Elbow Type, AS Series
Caution
- ■ SMC Air Cylinder Product Selection and Technical Information
The featured products page can be found here.
■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a model number.
■ Products Planned for Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2/MG types, etc., are already available. Click here to check.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis. - See catalog for specification details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
Product Description
Speed controller for preventing unintentional manual operations.
[Features]
· Flow rate can be adjusted using a straight-slot screwdriver.
· RoHS compliant.
· Fluid: air.
· Proof pressure: 1.5 MPa.
· Maximum operating pressure: 1 MPa.
· Minimum operating pressure: 0.1 MPa.
· Ambient and fluid temperature: -5 to +60°C (no freezing).
Speed Controller Adjustable By Straight-Slot Screwdriver, Standard Type, Metal Elbow Type, AS□2□0-D Series Specifications
AS□2□0-D Series external appearance
AS□2□0-D Series JIS symbol
| Specifications | Model | |||||||
|---|---|---|---|---|---|---|---|---|
| AS12□0-M5 | AS12□0-U10/32 | AS22□0-□01 | AS22□0-□02 | AS32□0-□02 | AS32□0-□03 | AS42□0-□04 | ||
| Port Size | M5 × 0.8 | 10-32UNF | 1/8 | 1/4 | 1/4, 3/8*4 | 3/8 | 1/2 | |
| Controlled flow Free flow | Flow rate L/min (ANR) | 105 | 230 | 460 | 920 | 1,700 | ||
| Sonic conductance dm3/(s·bar) | 0.32 | 0.7 | 1.4 | 2.8 | 5.2 | |||
| Critical pressure ratio | Controlled flow | 0.2 | 0.25 | 0.3 | 0.25 | 0.25 | ||
| Free flow | 0.4 | 0.2 | 0.3 | 0.2 | 0.3 | |||
*1: Flow rate at a pressure of 0.5 MPa and a temperature of 20°C.
*2: Meter-out and meter-in types can be visually differentiated by the flow direction symbol on the resin body.
*3: All brass components are electroless nickel plated.
*4: In the case of AS32□0-□02, the female thread (solenoid valve side) bore diameter is 3/8.
Structure drawing
Meter-out type
M5 type and U10/32 type structure drawing 1
M5 type and U10/32 type structure drawing 2
AS3200-02 structure drawing
Meter-in type
M5 type and U10/32 type structure drawing 1
M5 type and U10/32 type structure drawing 2
AS3210-02-D structure drawing
Component parts
| Number | Description | Material | Note |
|---|---|---|---|
| 1 | Body A | Zinc alloy | Chromate treatment |
| 2 | Body B | Brass | Electroless nickel plated |
| 3 | Needle | Brass | Electroless nickel plated |
| 4 | Seat ring | Brass | Electroless nickel plated |
| 5 | Spring | *1Steel wire | - |
| 6 | U seal | HNBR | - |
| 7 | O-ring | NBR | - |
| 8 | O-ring | NBR | - |
| 9 | O-ring | NBR | - |
| 10 | Bushing | PBT | - |
| 11 | O-ring | NBR | - |
| 12 | Gasket | NBR / stainless steel | - |
| 13 | C type retaining ring for hole | Tool steel | - |
*1: Stainless steel for M5 and U10/32 types only.
Drawings
AS□2□0-D Series dimensional drawing
(Units: mm)
| Model | T1 | T2 | H | D1 | D2 | D3 | L1 | L2 | L3 | L4 | A* | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AS12□0-M5-D | M5 × 0.8 | M5 × 0.8 | 8 | 9 | 9 | 4.7 | 10 | 31 | 10.3 | 0.7 | 27.4 | 13 |
| AS12□0-U10/32-D | 10-32UNF | 10-32UNF | ||||||||||
| AS22□0-01-SD | R 1/8 | Rc 1/8 | 12 | 14.3 | 14.6 | 7.2 | 18 | 34.7 | 13.2 | 1.2 | 31.6 | 33 |
| AS22□0-F01-SD | G 1/8 | |||||||||||
| AS22□0-N01-SD | NPT 1/8 | NPT 1/8 | 12.7 | |||||||||
| AS22□0-02-SD | R 1/4 | Rc 1/4 | 17 | 18 | 19.5 | 7.2 | 27.2 | 40.2 | 17.5 | 1.2 | 36.7 | 72 |
| AS22□0-F02-SD | G 1/4 | |||||||||||
| AS22□0-N02-SD | NPT 1/4 | NPT 1/4 | 17.5 | |||||||||
| AS32□0-02-SD | R 1/4 | Rc 3/8 | 19 | 22.5 | 24.3 | 9.8 | 30 | 54.8 | 21.9 | 1.2 | 49.3 | 123 |
| AS32□0-F02-SD | G 3/8 | |||||||||||
| AS32□0-N02-SD | NPT 1/4 | NPT 3/8 | ||||||||||
| AS32□0-03-SD | R 3/8 | Rc 3/8 | 19 | 22.5 | 24.3 | 9.8 | 30 | 52.6 | 19.7 | 1.2 | 47.4 | 128 |
| AS32□0-F03-SD | G 3/8 | |||||||||||
| AS32□0-N03-SD | NPT 3/8 | NPT 3/8 | ||||||||||
| AS42□0-04-SD | R 1/2 | Rc 1/2 | 24 | 27.5 | 28.5 | 12.4 | 38.5 | 62.9 | 25.8 | 1.2 | 55.8 | 222 |
| AS42□0-F04-SD | G 1/2 | |||||||||||
| AS42□0-N04-SD | NPT 1/2 | NPT 1/2 | 23.8 |
*Reference dimensions of threads after installation.
Precautions
- *Prior to use, always refer to the manufacturer's catalog on safety precautions as well as drive control equipment and common precautions.
- *The images are representative images. The appearance may differ from the actual product.
- *See the manufacturer's catalog for information other than the above.