Thermal Refined Equipment DPS Series Digital Pressure Switch

Brand :
AIRTAC
Caution
Product Description
[Features]
· This is a pressure switch from the DPS series.
· There are two types: equipped with NPN2 output and equipped with PNP2 output.
Drawing
DIN terminal

Grommet

Product Specification
| Input power supply | Voltage range | 12 to 24 V DC +/- 10%, ripple p-p < 10% |
|---|---|---|
| Pressure measurement | Operating fluid | Non-corrosive gas |
| Rated pressure range | DPSN1 (P1) -01: -100 kPa to 100 kPa DPSN1 (P1) -10: -100 kPa to 1,000 kPa | |
| Proof pressure | DPSN1 (P1) -01: 200 kPa DPSN1 (P1) -10: 1,500 kPa | |
| Measurement error | ±2% F.S. ±1 digit, ±1 digit (ambient temperature 25±3°C) | |
| Repeatability | +/- 0.2% F.S. +/- 1 digit | |
| Temperature error | ±3% F.S. ±1 digit (25°C reference, range 0 to +50°C) | |
| Display | Display method | 4-digit measurement value and 3-1/2 digit set value, dual-row LCD display |
| Display color | Two-color display (red, green) | |
| Display refresh rate | 100 ms, 250 ms, 500 ms, 1,000 ms | |
| Output | Switch output | DPSN1: Equipped with NPN2 output DPSP1: Equipped with PNP2 output |
| Comparative Output | NPN: Maximum withstand voltage 30 V/100 mA, residual voltage < 1.5 V PNP: Maximum withstand voltage 30 V/100 mA, residual voltage < 1.5 V | |
| Response time | 2 ms, 20 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 2,500 ms, 5,000 ms | |
| Delay | DPSN1 (P1) -01: 0.1, 0.2, 0.3: 0.8 (kPa) DPSN1 (P1) -10: 1, 2, 3: 8 (kPa) | |
| Output mode | EASY mode, Hysteresis mode, Window comparator mode | |
| Pressure units | DPSN1 (P1) -01 | kPa, kgf/cm2, bar, psi, mmHg, inHg |
| DPSN1 (P1) -10 | MPa, kPa, kgf/cm2, bar, psi, cmHg, inHg | |
| Vibration resistance | Endurance 10 to 500 Hz, 10 mm double amplitude, 3 times in each of XYZ directions | |
| Impact resistance | Endurance 100 m/s2 3 times for XYZ direction each | |
| Operating environment temperature | 0 to +50°C | |
| Storage ambient temperature | -20 to +65°C | |
| Operating environment humidity | 35% to 80% RH (no condensation or freezing) | |
Display/operation section

| Number | Name |
|---|---|
| A | Numeric Up Key |
| B | Set/Confirm Key |
| C | Numeric Down Key |
| D | Pressure numeral display section |
| E | Set pressure value display section |
| F | Output lamp 1 |
| G | Output lamp 2 |
| H | Power supply and output signal connector |
| J | Pressure port |
Selection Support Information
Order code

(Note) The protection structure for grommet connection is IP63.