Linear Slide Hand LSH-HP Series

Drawing

LSH-A (tube inner diameter: ⌀6)

■ LSH-A06*1N

Note: Do not fix the main body using the tapped holes for rail plate mounting.

■ LSH-A06*2N

■ LSH-A06*3N

■ LSH-A06**R/L

Note: For LSH-A06**R, positioning holes are processed on the curved surface (R side), and for LSH-A06**L, they are processed on the L side.

■ With switch, side mounting

Note: The RD dimension indicates the highest sensitivity position at the open end position, and the HD dimension indicates the highest sensitivity position at the closed end position.
    Please adjust the actual mounting position after confirming the switch operation status.
Note: If it is an issue for the switch to protrude from the head side end face, please use rail mounting.
Note: F*S cannot be used as it interferes with the piping.
Note: Because the open/close stroke is short, only one side—either the open or closed state—can be detected by a single switch.
Note: Please use piping with an outer diameter of ⌀6.9 or less.
Note: Please install the RD detection switch on the side opposite the port.
Note: In some cases, the switch may not turn off even if it is inserted all the way to the back of the groove beyond the RD position.

■ With switch  Rail assembly

Note: The RD dimension indicates the highest sensitivity position at the open end position, and the HD dimension indicates the highest sensitivity position at the closed end position.
     Please adjust the actual mounting position after checking the operating status of the switch.
Note: F*H and F*V cannot be used because they protrude from the rail.
Note: Because the open/close stroke is short, only one side—either the open or closed state—can be detected by a single switch.
Note: The switch cannot be fixed at positions that overlap with the rail mounting bolt. The switch may not turn off.

LSH-G / LSH-F (tube inner diameter: ⌀6)

■ LSH-G06, LSH-F06

Note: Do not fix the main body using the tapped holes for rail plate mounting.

■ LSH-G06*1R/L, LSH-F06*1R/L

Note: For LSH-G06*1R, the pin hole is processed on the curved surface, and for LSH-G06*1 L, the pin hole is processed on the L surface.

■ With switch, side mounting

Note: The RD dimension indicates the highest sensitivity position at the open end position, and the HD dimension indicates the highest sensitivity position at the closed end position.
    Please adjust the actual mounting position after confirming the switch operation status.
Note: If it is an issue for the switch to protrude from the head side end face, please use rail mounting.
Note: F*S cannot be used as it interferes with the piping.
Note: Because the open/close stroke is short, only one side—either the open or closed state—can be detected by a single switch.
Note: Please use piping with an outer diameter of ⌀6.9 or less.
Note: Please install the RD detection switch on the side opposite the port.
Note: In some cases, the switch may not turn off even if it is inserted all the way to the back of the groove beyond the RD position.

■ Switch-equipped rail assembly

Note: The RD dimension indicates the highest sensitivity position at the open end position, and the HD dimension indicates the highest sensitivity position at the closed end position.
    Please adjust the actual mounting position after confirming the switch operation status.
Note: F*H and F*V cannot be used because they protrude from the rail.
Note: Because the open/close stroke is short, only one side—either the open or closed state—can be detected by a single switch.
Note: The switch cannot be fixed at positions that overlap with the rail mounting bolt. The switch may not turn off.

Product Specification

Internal structure drawing and parts list

■ LSH-A

■ LSH-G / LSH-F

■ Consumable Parts List