MLGP Series Low Profile Guide Cylinder With Lock,Single Rods Type

Drawing

⌀20·⌀25·⌀32

⌀40·⌀50·⌀63

⌀80·⌀100

Product Specifications

Part number display method

Cylinder specifications

Tube inner diameter (mm)	20	25	32	40	50	63	80	100
Operating method	Double acting type
Operating fluid	Air
Guaranteed pressure resistant	1.5 MPa
Maximum operating pressure	1.0 MPa
Minimum operating pressure	0.2 MPa^*
Ambient and fluid temperatures	-10°C to +60°C (no freezing)
Operating piston speed	50 to 400 mm/s
Cushion	Rubber cushions on both sides
Lubrication	Not required (lubrication-free)
Stroke Length Tolerance	0 to +1.5 mm
Piping connection port diameter (Rc, NPT, G)	1/8				1/4		1/8

*If the lock release air is not shared with the cylinder drive air, the minimum operating pressure is 0.15 MPa.
(The minimum operating pressure of the cylinder alone is 0.15 MPa.)

Lock specifications

Tube inner diameter (mm)	20	25	32	40	50	63	80	100
Locking method	Spring locking (exhaust locking)
Unlocking pressure	0.2 MPa or more
Locking Starting Pressure	0.05 MPa or less
Locking Direction	One direction (extension locking, retraction locking)
Maximum operating pressure	1.0 MPa
Unlocking piping connection port diameter (Rc, NPT, G)	M5 × 0.8		1/8					1/4
Holding power (maximum static load) (N)^*	157	245	402	629	982	1,559	2,513	3,927

*The holding power (maximum static load) indicates the maximum capacity, not the normal holding capacity. Regarding the selection of the cylinder, please check the precautions and select the model.
* Please refer to the precautions for manually unlocking and holding the unlocked state.

Standard stroke table

Tube inner diameter (mm)	Standard stroke (mm)
20,25	20,30,40,50,75,100,125,150,175,200,250,300,350
32 to 80	25,50,75,100,125,150,175,200,250,300,350
100	50,75,100,125,150,175,200,250,300,350

Theoretical output table

Tube inner diameter (mm)	Rod diameter (mm)	Operating Direction	Pressure receiving area (mm^2)	Operating pressure (MPa)
				0.2	0.3	0.4	0.5	0.6	0.7	0.8	0.9	1.0
20	10	OUT	314	63	94	126	157	188	220	251	283	314
		IN	236	47	71	94	118	142	165	189	212	236
25	12	OUT	491	98	147	196	246	295	344	393	442	491
		IN	378	76	113	151	189	227	265	302	340	378
32	16	OUT	804	161	241	322	402	482	563	643	724	804
		IN	603	121	181	241	302	362	422	482	543	603
40	16	OUT	1,257	251	377	503	629	754	880	1,006	1,131	1,257
		IN	1,056	211	317	422	528	634	739	845	950	1,056
50	20	OUT	1,963	393	589	785	982	1,178	1,374	1,570	1,767	1,963
		IN	1,649	330	495	660	825	990	1,154	1,319	1,484	1,649
63	20	OUT	3,117	623	935	1,247	1,559	1,870	2,182	2,494	2,805	3,117
		IN	2,803	561	841	1,121	1,402	1,682	1,962	2,242	2,523	2,803
80	25	OUT	5,027	1,005	1,508	2,011	2,514	3,016	3,519	4,022	4,524	5,027
		IN	4,536	907	1,361	1,814	2,268	2,722	3,175	3,629	4,082	4,536
100	30	OUT	7,854	1,571	2,356	3,142	3,927	4,712	5,498	6,283	7,069	7,854
		IN	7,147	1,429	2,144	2,859	3,574	4,288	5,003	5,718	6,432	7,147

*Theoretical output (N) = pressure (MPa) × pressure receiving area (mm^2).

Standard table

⌀20·⌀25·⌀32

⌀40·⌀50·⌀63

⌀80·⌀100