Stepper Motor AZ Series
Caution
- Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.
Product Description
[Features]
・ Equipped with a newly developed ABZO sensor
・ No external sensor required
・ Reduction of origin return time
・ No battery required
・ Energy saving and low heat generation
・ Three drivers to choose from to match your system configuration
・ Easy operation that can be realized with the data setting software MEXE02
Drawing
AC power supply input: Standard type
· Motor
AZM46AC
AZM48AC
AZM66AC/AZM69AC
AZM98AC/AZM911AC
· Driver
The drawing is of a type with built-in positioning function. External dimensions and accessories are common to all driver types.
Product Specification
General Specifications
*1. Only for models with electromagnetic brake
*2. According to Oriental Motor measurement conditions
*3. When a heat sink equivalent to or larger than a 200×200 mm, 2 mm thick aluminum board is attached
*4. T.I.R (Total Indicator Reading): Indicates the total dial gauge reading when the measurement section is rotated once around the reference shaft center.
[Cautions]
- When measuring insulation resistance or conducting dielectric strength tests, disconnect the motor from driver. Also, do not perform these tests on the ABZO sensor section of the motor.
Specifications: AC power supply input
■Standard type: Mounting angle dimensions 42 mm, 60 mm, 85 mm
* 1. The values in parentheses are when a motor with an electromagnetic brake is connected.
* 2. The motor with electromagnetic brake has a specification of 24 V DC +/- 4% when extended by 20 m using a cable.
· Motor
| Mounting hole square dimension mm | Part number | L | Weight kg |
|---|---|---|---|
| 42 | AZM46AC | - | 0.44 |
| AZM48AC | - | 0.68 | |
| 60 | AZM66AC | 72 | 0.91 |
| AZM69AC | 97.5 | 1.4 | |
| 85 | AZM98AC | 84 | 1.9 |
| AZM911AC | 114 | 3 |
· Driver
- Weight: 0.65 kg
[Accessories]
- Main power supply / regenerative resistor connector (CN4)
Connector: 05JFAT-SAXGDK-H5.0 (J.S.T. MFG. CO., LTD.)
Connector connection lever - Input/output signal connector (CN5)
Connector: DFMC1,5/12-ST-3,5 (Phoenix Contact Co., Ltd.) - 24 V DC power supply input, electromagnetic brake connection, regenerative resistor thermal input, power cutoff signal input/output connector (CN1)
Connector: DFMC1,5/7-ST-3,5-LR (Phoenix Contact Co., Ltd.)