Brushless Motor BLM Series

Brand :

ORIENTAL MOTOR

Caution

This product image is representative only. Please see the product specifications for details.

Product Description

[Brand]Oriental Motor
[Voltage Specifications]
· 100 V AC
· 200 V AC
[Gear head]
· Parallel shaft gear head
· Hollow shaft flat gearhead
[Features]
· New Connector
· Equipped with stainless steel shaft as standard
· Cable with selectable drawer direction for direct connection
· Compact, high output, and high efficiency design
· Compatible with H1 grease for food machinery (only for connector type parallel shaft gear head GFV gear)
· Significantly improved unit efficiency of motor and driver
· Motor and gearhead are pre-assembled

Drawing

Parallel Shaft Gearhead GFV Gear, 30W

■ Motor (Cable Connection Type)

Drawing 1 of Brushless Motor, BLM Series

■ Motor (Connector Type)

Drawing 3 of Brushless Motor, BLM Series

*Diagram when the separately sold connection cable is attached.

Product Specification

Parallel Shaft Gearhead GFV Gear, 30W

■ Specifications

Part number	Motor	Cable Type	BLM230-*B
	Motor	Connector type	BLM230HP-S/BLM230HP-SF
	Driver		BMUD30-A2	BMUD30-C2
Rated Output (Continuous)		W	30
Power supply input	Rated Voltage	V	Single-phase 100-120	Single-phase 200-240 / Three-phase 200-240
	Allowable Voltage Variation Range	-	-15 to +10%
	Frequency	Hz	50/60 (Hz)
	Allowable Range of Frequency	-	+/- 5%
	Rated input current	A	1.2	Single-phase: 0.7 / Three-phase: 0.38
	Maximum Input Current	A	2.0	Single-phase: 1.2 / Three-phase: 0.75
Rated Rotational Speed		[r/min]	3,000
Velocity Control Range			80 to 4,000 r/min (speed ratio 1:50)
Speed Fluctuation Rate	Against Load		+/- 0.2% or less under the following conditions: 0 to rating torque, rating rotating speed, rating voltage, normal temperature
	Compatible voltage		+/- 0.2% or less under the following conditions: -15 to +10% of rated voltage, rated rotational speed, no load, normal temperature
	Compatible temperature		+/- 0.2% or less under the following conditions: operating ambient temperature 0 to +40°C, rated rotational speed, no load, rated voltage

*The values for each specification and characteristic are the characteristics of the motor alone.

Part number	Part number of motor	Part number of gearhead	Reduction ratio	Weight (kg)
BLM230-*B	BLM230-GFV2	GFV2G*	5 to 20	0.7
			30 to 100	0.75
			200	0.8
BLM230HP-S BLM230HP-SF	BLM230HP-GFV	GFV2GS GFV2GSF	5 to 20	0.63
			30 to 100	0.68
			200	0.73

*The listed mass does not include the mass of the connection cable. (connector type)
*The numeral replacing the asterisk in the part numbers represents the reduction ratio.
*"Mounting screws" are included.

■ Reduction ratio

*1 The rotating speed of the output shaft is the value obtained by dividing the rotating speed by the reduction ratio.
*3 This also applies when the deceleration time is set to less than 0.1 seconds in digital settings.

Specifications Table

Part number	Reduction ratio	L
BLM230-B BLM230HP-S BLM230HP-*SF	5 to 20	34
	30 to 100	38
	200	43