Brushless Motor BMU Series

Brand :

ORIENTAL MOTOR

Caution

Product Description

[Brand] Oriental Motor
[Power supply voltage]
· Single-phase 100-120 V
· Three-phase 200-240 V
· Single-phase 200-240 / Three-phase 200-240 V
[Features]
· Kurukuru Pon. Easy speed control
· Easy wiring. Start immediately
· Maximum rotational speed 4,000 r/min, speed ratio 1:50 (2.5 times higher than previous models)
· By opening the driver's front panel, you can set various functions

Drawing

Driver (Common for cable type and connector type)

■ 30W, 60W, 120W / BMUD30-A2, BMUD30-C2, BMUD60-A2, BMUD60-C2, BMUD120-A2, BMUD120-C2

Drawing 1 of Brushless Motor, BMU Series

■ 200W, 300W, 400W / BMUD200-A, BMUD200-C, BMUD300-C, BMUD400-S

Drawing 2 of Brushless Motor, BMU Series

Product Specification

General Specifications

Items		Driver
Insulation resistance		After continuous operation at normal temperature and humidity, the value measured with a 500 V DC ohmmeter between the power supply terminal and protective earth terminal, and between the power supply terminal and input/output signal terminal, is 100 MΩ or more.
Dielectric strength		After continuous operation at normal temperature and humidity, no abnormality is observed even if 1.5 kV AC at 50 Hz is applied for 1 minute between the power supply terminal and protective earth terminal, and between the power supply terminal and input/output terminals.
Temperature rise		After rated continuous operation at normal temperature and humidity, the temperature rise of the heat sink measured by the thermocouple method is 50°C or less.
Operating environment	Ambient temperature	0 to +40°C (No freezing) [Only when the front side of the 300W or 400W type driver is installed in the upward orientation: 0 to +35°C (No freezing)]
	Ambient humidity	85% or less (No condensation)
	Altitude	1,000 m or less above sea level
	Environment	No corrosive gases or dust. No contact with oil. Cannot be used in a special environment such as radioactive area, magnetic field, and vacuum.
	Vibration	Continuous vibration or excessive shock must not be applied. Compliant with JIS C60068-2-6 "Sine-wave vibration test method". Frequency range: 10 to 55 Hz, Half amplitude: 0.15 mm, Sweep direction: 3 directions (X, Y, Z), Number of sweeps: 20 times
Storage Environment *1	Ambient temperature	-25 to +70°C (no freezing)
	Ambient humidity	85% or less (No condensation)
	Altitude	Altitude: 3,000 m or lower (For JV gear, JB gear, and JH gear: 1,000 m or lower)
	Environment	No corrosive gases or dust. No direct contact with water or oil. Cannot be used in a special environment such as radioactive area, magnetic field, and vacuum.
Heat-resistant class		-
Protection Rating		IP20

*1 The storage environment value is for a short period, including during transportation.

Weight

■ 30 W, 60 W, 120 W

Part number	Weight
BMUD30-A2	0.4 kg
BMUD30-C2
BMUD60-A2
BMUD60-C2
BMUD120-A2
BMUD120-C2

■ 200W, 300W, 400W

Part number	Weight
BMUD200-A	0.8 kg
BMUD200-C
BMUD300-C
BMUD400-S

Cautions and Prohibitions

Do not perform insulation resistance measurement or pressure resistance test while the motor and driver are connected.