Interface Terminal Block, Standard Type, 7 mm Pitch (TIFA740DSH37)

Interface Terminal Block,  Standard Type,   7 mm Pitch TIFA740DSH37

Uses M3 screws and boasts the smallest pitch in the industry at just 7 mm.

[Features]
· A standard 1-to-1 wiring connection type interface terminal block.
· A space-saving design with a terminal pitch of just 7 mm. Features a horizontal width of 150 mm, even with the 40 pole type. Despite its small size, it can be used with JIS standard crimp terminals.
· Types which use a fall prevention screw structure that ensures screws will not fall, even if turned upside down, are also available.
· Features a terminal pitch of 8.5 mm, designed with an emphasis on workability. Ensures sufficient space between the terminal screws on the upper and lower levels, enabling the terminal screws on the lower level to be tightened after wiring.
· The wiring on the lower level can also be replaced without having to remove the wiring on the upper level.
· Wires of 2 mm2, one size larger than other series wires, can also be wired in case of issues such as voltage drops, etc.
· Types with a terminal pitch of 3.8 mm or 5 mm and that use press-tightening screws are also available. These helps improve space saving and size-reducing measures.

PDF

Part Number

Configured Part Number is shown.

TIFA740DSH37

Part Number
TIFA740DSH37
Part NumberVolume DiscountDays to Ship
2 Day(s) or more

Loading...

  1. 1

Basic Information

Connector D-sub connector Terminal Block Screw M3 Number of Poles(Pole) 37
Mounting Method DIN rail/Direct attachment Pitch Between Terminals(mm) 7 Supported equipment PLC/servo other
Supported equipment manufacturer Mitsubishi Electric Dimension vertical(mm) 45 Dimension width(mm) 150
Dimension depth(mm) 45 Connector manufacturer Hirose Terminal Block Shape Standard Form
Features Female Connector Type

Please check the type/dimensions/specifications of the part TIFA740DSH37 in the Interface Terminal Block, Standard Type, 7 mm Pitch series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)