MELSEC-F Series Data Link/Communication (Ethernet)
Brand :
MITSUBISHI
Caution
Product Description
· Ethernet connectivity: Both modules enable easy connection of FX3 series PLCs to Ethernet networks for enhanced communication and control.
· FX3U-ENET-L allows the read/write of sequence programs from/to FX3U/FX3UC PLCs via Ethernet.
· FX3U-ENET-ADP provides remote monitoring and the ability to change programs, improving maintenance efficiency.
· Buffer memory (FX3U-ENET-L): Facilitates communication with other PLCs or devices using fixed buffers.
· E-mail functionality (FX3U-ENET-L): Allows sending e-mails directly from the PLC.
· Easy setup: Both modules offer simple Ethernet configuration via dedicated PC tools.
· Compatibility: FX3U-ENET-ADP works with a wide range of FX3 series modules.
MELSEC-F Series Data Link/Communication (Ethernet) Specifications
FX3U-ENET-ADP
FX3U-ENET-ADP Image
- By connecting a special adapter for Ethernet communication to the FX3 series basic unit, sequencers used in various devices can be easily connected to Ethernet.
- Connecting to a network makes it feasible to monitor the status of or change the program of the sequencer from a distance, which improves maintainability.
- Basic unit can be selected from the rich lineup of the FX3 series.
FX3U-ENET-ADP Performance Specifications
| Transmission Specifications | Data Transmission Speed | 100 Mbps or 10 Mbps |
|---|---|---|
| Communication Mode | Full-duplex / half-duplex | |
| Transmission Method | Baseband | |
| Maximum Segment Length | 100 m | |
| Maximum Number of Nodes/Connections | 10BASE-T: Up to 4 cascade connection levels 100BASE-TX: Up to 2 cascade connection levels The above is the number of connectable levels when using a repeater hub. For the number of connectable levels when using a switching hub, check with the manufacturer of the switching hub to be used. | |
| Applicable Connector | RJ45 | |
| Function | · MELSOFT connection · Communication using MC protocol · Direct connection with MELSOFT (easy connection) · Connected CPU search function · Time setting function *Time setting function (SNTP client) can be executed only after the trigger condition is met · Diagnostic function from MELSOFT · Data monitoring function | |
| Number of Connections | MELSOFT connection + MC protocol + data monitoring ≤ 4 connections | |
| Number of Connectable Unit to Base Unit | One Ethernet adapter occupies one communication channel (CH), as n communication function expansion board or other special communication adapters do. | |
| Applicable Sequencers | FX3S, FX3G (V2.00 or later), FX3U (V3.10 or later), FX3GC (V2.00 or later), FX3UC (V3.10 or later): FX3S-CNV-ADP is required to connect to the FX3S. FX3G-CNV-ADP is required to connect to the FX3G. A function expansion board is required to connect to an FX3U or FX3UC-32MT-LT (-2). | |
| Weight | 0.1 kg | |
| Power Supply Specifications | ||
| Power Supply | 30 mA / 5 V DC (Energized internally from the 5 V DC power supply of the base unit) | |
| Allowable Momentary Power Outage Duration | Same as the connected sequencer | |
General Specifications
| Ambient Temperature | 0 to 55°C: When operating, -25 to 75°C: When stored | ||
|---|---|---|---|
| Relative Humidity | 5 to 95% RH (non-condensing): When operating | ||
| Vibration Resistance | When Mounting to DIN Rail | Frequency: 10 to 57 Hz | Single amplitude: 0.035 mm, 10 times in each direction of X, Y and Z (total of 80 minutes each) |
| Frequency: 57 to 150 Hz | Acceleration: 4.9 m/s2 10 times in each direction of X, Y and Z (total of 80 minutes each) | ||
| When Mounting Directly | Frequency: 10 to 57 Hz | Single amplitude: 0.075 mm 10 times in each direction of X, Y and Z (total of 80 minutes each) | |
| Frequency: 57 to 150 Hz | Acceleration: 9.8 m/s2 10 times in each direction of X, Y and Z (total of 80 minutes each) | ||
| Impact Resistant | 147 m/s2, for a duration of 11 ms, 3 times in each direction of X, Y and Z with a half-sine pulse | ||
| Noise Resistance | Achieved through a noise simulator with a noise voltage of 1,000 Vp-p, noise width of 1 μs, the rise time of 1 ns and frequency of 30 to 100 Hz | ||
| Withstand Voltage | Between all terminals batch and earth terminal: 500 V AC for 1 minute | ||
| Insulation Resistance | Between all terminals batch and earth terminal: 5 MΩ or more with 500 V DC ohmmeter | ||
| Operating Atmosphere | There shall be no corrosion gas or flammable gas and not much conductive dust | ||
| Altitude of Use | 2,000 m or less Cannot be used in environments pressurized above atmospheric pressure. This may cause failure. | ||