KGNW Series, Control Box
Caution
Product Description
IP40/closed type box made from steel plate.
[Features]
- Box.
- Lineup also includes products with IDEC and HW/XW series control units.
- Bored model can be mounted to ⌀22 units.
- Models with no holes allowing the user to freely bore holes in whatever size or position the user like are also available.
- Model with no holes can also be mounted inside terminal blocks for use as a relay box.
- Yellow cover model for emergency termination and contact cover boxes that use IP65 for the wiring parts of control units mounted to panels are also available (76 mm type).
- Four box mounting modes: direct mounting, back surface mounting, hook mounting, and aluminum frame mounting.
- UL and c-UL certified.
Appearance of the KGNW type
Unit mounting hole machining diagram (KGNW111Y to KGNW314Y) Unit: mm
Unit mounting hole machining diagram (KGNW414Y, KGNW515Y) Unit: mm
| - | KGNW | |||||
|---|---|---|---|---|---|---|
| 111Y | 212Y | 313Y | 314Y | 414Y | 515Y | |
| L | 100 | 150 | 200 | 200 | 250 | 300 |
| L1 | 50 | 100 | 150 | 150 | 200 | 250 |
| L2 | 75 | 125 | 175 | 175 | 225 | 275 |
| L3 | 80 | 130 | 180 | 180 | 230 | 280 |
| Weight (approx.) | 0.4kg | 0.5kg | 0.6kg | 0.6kg | 0.7kg | 0.8kg |
KGNW type (wall-mounted type) dimensional drawing (unit: mm)
KGNW111Y external dimensions (unit: mm)
KGNW212Y external dimensions (unit: mm)
KGNW313Y external dimensions (unit: mm)
KGNW314Y external dimensions (unit: mm)
KGNW414Y external dimensions (unit: mm)
KGNW515Y external dimensions (unit: mm)
Unit mounting hole
- φ22.2 (diameter 22.2 mm) hole (with anti-rotation hole).
- Mounting hole pitch is 50mm (for 2, 3, 4, 5 points), 36mm (for 4 points).
Knockout Processing
- Double knockouts are installed on the top and bottom of the box.
Top: φ22 (diameter 22 mm), φ27 (diameter 27 mm) / double knockout
Bottom: φ16 (diameter 16 mm), φ20 (diameter 20 mm) / double knockout - One rubber bushing is included to prevent damage to the drop line, and the 1-point and 2-point boxes fit into φ20 (diameter 20 mm) or φ22 (diameter 22 mm) holes, while the 3- to 5-point boxes fit into φ27 (diameter 27 mm) holes.
Specification
| Protective structure | IP40 (IEC 60529) |
|---|---|
| Material (box) | Steel plate (t=1.0mm) |
| Standard paint color (melamine resin paint) | 5Y7/1 Semi-gloss |
| Rated Insulation Voltage | 600V |
| Insulation resistance | 5MΩ or higher |
| Withstand voltage | AC2500V for 1 minute (between charged and non-charged parts) |
| Standard use condition | Ambient temperature: -25 to +50°C (but no freezing) Relative humidity: 45 to 85% RH (but no condensation) |
| Box Type | Wall-mounted type [for 1 to 5 items] |
| Wiring inlet (wall-mounted type) | Double knockout processing Box top surface/φ22, φ27 Box bottom surface/φ16, φ20 |
| Attachable Units | φ22 control unit |
- Minimum applicable load (reference value) = AC/DC 3V/5mA (usable range may vary depending on usage conditions and type of load.)
Contact rating (contact block)
| Contact Block | Rated Insulation Voltage | 600V |
|---|---|---|
| Rated current | 10A | |
| Contact ratings based on load type JIS C8201-5-1, IEC60947-5-1 | AC-15 (A600) DC-13 |
Voltage and current used based on load type
| Operating voltage | 24V | 48V | 50V | 110V | 220V | 440V | ||
|---|---|---|---|---|---|---|---|---|
| Current used | AC 50/60Hz | AC-12 resistive loads and semiconductor loads etc. | 10A | - | 10A | 10A | 6A | 2A |
| AC-15 Control of AC electromagnetic load (>72VA) | 10A | - | 7A | 5A | 3A | 1A | ||
| Direct current | DC-12 resistive loads and semiconductor loads etc. | 8A | 4A | - | 2.2A | 1.1A | - | |
| DC-13 DC magnet control, etc. | 4A | 2A | - | 1.1A | 0.6A | - | ||
Rubber bushing (accessory) color: black
| Box Type | Bushings included | Matching knockout holes | ||
|---|---|---|---|---|
| Model number | External dimensions | Inner Diameter Dimensions | ||
| 1/2 point type | GB-2 | φ30mm | φ16mm | φ20 or φ22 hole |
| 3, 4, 5 dots | GB-3 | φ38mm | φ20mm | φ27 hole |
*For product information other than the above, please refer to the catalog.