GOT1000 MELSECNET/H Communication Unit
Brand :
MITSUBISHI
Caution
Product Description
A MELSECNET/H communication unit
GOT1000 MELSECNET/H Communication Unit Details
The MELSECNET/H Communication Unit is a unit for using the GOT1000 series as a normal station (MELSECNET/H connection, MELSECNET/10 connection) of the MELSECNET/H network system (PC-to-PC network) and MELSECNET/10 network system (PC-to-PC network).
Product image of GT15-J71BR13
Product image of GT15-J71LP23-25
Dimensional Drawing of the Product
(Unit: mm)
GT15-J71BR13 dimensional drawing
GT15-J71LP23-25 dimensional drawing
GT15-J71BR13 Specifications
| Category | Communication unit | |
|---|---|---|
| Series | GOT1000 | |
| Unit | MELSECNET/H Communication Unit | |
| Product Type Name | GT15-J71BR13 | |
| Applicable Standards | UL/cUL, CE(EMC), KC | |
| Supported Models | GT27, GT25 (5.7 type, wide model, enhanced environmental resistance model are excluded), GT16, GT15 | |
| Maximum Number of Link Points Used Per Network | LX/LY | 8,192 points |
| LB | MELSECNET/H mode, MELSECNET/H expansion mode: 16,384 points, MELSECNET/10 mode: 8,192 points | |
| LW | MELSECNET/H mode, MELSECNET/H expansion mode: 16,384 points, MELSECNET/10 mode: 8,192 points | |
| Maximum Link Points Per Station | MELSECNET/H mode, MELSECNET/10 mode: {(B+Y)÷8+(2 × W)}≦2,000 bytes, MELSECNET/H Expansion mode: {(B+Y)÷8+(2 × W)}≦35,840 bytes | |
| Communication Speed | 10 Mbps | |
| Communication Method | Token bus method | |
| Synchronization Method | Frame synchronization method | |
| Transmission Path Type | Coaxial single bus | |
| Total Extension Distance | 3C-2V: 300 m, 5C-2V: 500 m *Possible to extend up to 2.5 km by using a repeater unit (A6BR10, A6BR10-DC) | |
| Distance Between Stations (Max.) | 3C-2V: 300 m, 5C-2V: 500 m | |
| Accessible Network Range | Only the sequencer on MELSECNET/H and MELSECNET/10 to which the GOT is connected | |
| Maximum Number of Groups | 0 (Group not specified) | |
| Number of Connected Stations | 31 stations | |
| RAS Function | Prevention of system failure due to migration of management station, diagnosis function of link line check of own station, abnormality detection by link special relay and register, various diagnosis functions | |
| Transient Transfer | N-to-N intercommunication | |
| Connection Cable | 3C-2V, 5C-2V equivalent products | |
| Compatible Connector | BNC-P-3-NiCAu (for 3C-2V), BNC-P-5-NiCAu (for 5C-2V) (DDK Ltd.) equivalent products | |
| Internal Current Consumption | 0.77 A | |
| Weight | 0.19 kg | |
- *When mounting an expansion unit on the MELSECNET/H Communication Unit, the ambient temperature for general specifications should be 5°C lower than the maximum temperature.
- *Mode setting of the MELSECNET/H Communication Unit should be performed with the connected device setting of GT Designer2 or GOT utility.
- *Station-to-station distance: There are restrictions on the distance between stations depending on the type of cable and the number of connected stations.
GT15-J71LP23-25 Specifications
| Category | Communication unit | |
|---|---|---|
| Series | GOT1000 | |
| Unit | MELSECNET/H Communication Unit | |
| Product Type Name | GT15-J71LP23-25 | |
| Supported Models | GT27, GT25 (5.7 type, wide model, enhanced environmental resistance model are excluded), GT16, GT15 | |
| Maximum Number of Link Points Used Per Network | LX/LY | 8,192 points |
| LB | MELSECNET/H mode, MELSECNET/H expansion mode: 16,384 points, MELSECNET/10 mode: 8,192 points | |
| LW | MELSECNET/H mode, MELSECNET/H expansion mode: 16,384 points, MELSECNET/10 mode: 8,192 points | |
| Maximum Link Points Per Station | MELSECNET/H mode, MELSECNET/10 mode: {(B+Y)÷8+(2 × W)}≦2,000 bytes, MELSECNET/H Expansion mode: {(B+Y)÷8+(2 × W)}≦35,840 bytes | |
| Communication Speed | 10 Mbps / 25 Mbps | |
| Communication Method | Token ring method | |
| Synchronization Method | Frame synchronization method | |
| Transmission Path Type | Optical duplex loop | |
| Total Extension Distance | 30 km | |
| Maximum Distance Between Stations | "At 25 Mbps" SI optical cable: 200 m, H-PCF optical cable: 400 m, Wide band H-PCF optical cable: 1 km, QSI optical cable: 1 km, "At 10 Mbps" SI optical cable: 500 m, H-PCF optical cable: 1 km, Wide band H-PCF optical cable: 1 km, QSI optical cable: 1 km | |
| Network | Only the sequencer on MELSECNET/H and MELSECNET/10 to which the GOT is connected | |
| Maximum Number of Groups | 0 (Group not specified) | |
| Number of Connected Stations | 63 Stations | |
| RAS Function | Prevention of system failure due to migration of management station, loopback function by abnormality detection and cable disconnection, diagnosis function of link line check of own station, abnormality detection by link special relay and register, various diagnosis functions | |
| Transient Transfer | N-to-N intercommunication | |
| Connection Cable | Optical Fiber Cable (User arranged product) | |
| Compatible Connector | 2-core optical connector plug (User arranged product) | |
| Internal Current Consumption | 0.56 A | |
| Weight | 0.18 kg | |
- *When mounting an expansion unit on the MELSECNET/H Communication Unit, the ambient temperature for general specifications should be 5°C lower than the maximum temperature.
- *Mode setting of the MELSECNET/H Communication Unit should be performed with the connected device setting of GT Designer2 or GOT utility.
- *Communication speed: 25 Mbps is only available in MELSECNET/H mode and MELSECNET/H expansion mode.
- *Station-to-station distance: There are restrictions on the distance between stations depending on the type of cable and the number of connected stations.
- *Compatible connector: Optical fiber cable requires special technology and special tools to connect the connector to the cable, and the connector should be a dedicated product.