1.27‑mm Pitch Two-Piece Connectors, HIF6 Series

1.27‑mm Pitch Two-Piece Connectors, HIF6 Series

Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.

[Features]
・Product variation: connection methods include board-to-board model and cable pressure connection.
・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.
・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).
・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

PDF

Japanese Only

1.27‑mm Pitch Two-Piece Connectors

HIF6 Series list

HIF6 Series list

Features of HIF6 Series 1.27‑mm Pitch Two-Piece Connectors

Product Standards

RatingRated current: 0.5 A
Rated voltage: 125 V AC
Operating temperature range: -55 to +85°C (Note 1)
Operating humidity range: 40 to 80%
Storage temperature range -10 to +60°C (Note 2)
Storage humidity range 40 to 70% (Note 2)
ItemStandardConditions
1. Insulation resistance1,000 MΩ or moreMeasure at 250 V DC
2. Withstand voltageThere shall be no flashover or dielectric breakdown.Energize at 300 V AC rms for 1 min
3. Contact resistance30 mΩ or lessMeasure at 0.1 A
4. Vibration resistanceThere shall be no electrical discontinuity for 1 μs or greater.10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours
5. Humidity resistanceInsulation resistance: 1,000 MΩ or moreLeave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours
6. Temperature cycleThere shall be no cracking or abnormalities with any of the parts.(-65°C: 30 mins. > 15 to 35°C: Max. 5 mins. > 125°C: 30 mins. > 15 to 35°C: Max. 5 mins.) 5 cycles
7. Durability (mating / un-mating)Contact resistance: 30 mΩ or less500 times
8. Solder heat resistanceNo melting of resin parts affecting performance.Solder bath: 260°C for 10 seconds
Manual solder: Soldering iron temperature of 360°C for 5 seconds

(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
(Note 3) Be aware that lock deformation may occur if an excessive load is placed on the inside of the lock.

 

Materials and Processing

Part NameMaterialsFinishNote
InsulatorPBT resinBlackUL94V-0
Socket contactCopper alloySelective gold plating-
Pin header socketBrass

List of Products In This Series

Cable ID connector HIF6-**D-1.27R(20)

Cable ID connector
HIF6-**D-1.27R(20)

Pin header right-angle type (with lock) HIF6-**PA-1.27DS(71)

Pin header right-angle type (with lock)
HIF6-**PA-1.27DS(71)

Pin header straight type (with lock) HIF6-**PA-1.27DSA(71)

Pin header straight type (with lock)
HIF6-**PA-1.27DSA(71)

Receptacle right-angle type (with mounting holes) HIF6B-**DA-1.27DS(71)

Receptacle right-angle type (with mounting holes)
HIF6B-**DA-1.27DS(71)

Receptacle right-angle type (without mounting holes) HIF6A-**DA-1.27DS(71)

Receptacle right-angle type (without mounting holes)
HIF6A-**DA-1.27DS(71)

Receptacle straight type (with mounting holes) HIF6B-**DA-1.27DSA(71)

Receptacle straight type (with mounting holes)
HIF6B-**DA-1.27DSA(71)

Receptacle straight type (without mounting holes) HIF6A-**DA-1.27DSA(71)

Receptacle straight type (without mounting holes)
HIF6A-**DA-1.27DSA(71)

Pin header right-angle type (with mounting holes) HIF6B-**PA-1.27DS(71)

Pin header right-angle type (with mounting holes)
HIF6B-**PA-1.27DS(71)

Pin header right-angle type (without mounting holes) HIF6A-**PA-1.27DS(71)

Pin header right-angle type (without mounting holes)
HIF6A-**PA-1.27DS(71)

Pin header straight type (with mounting holes) HIF6B-**PA-1.27DSA(71)

Pin header straight type (with mounting holes)
HIF6B-**PA-1.27DSA(71)

Pin header straight type (without mounting holes) HIF6A-**PA-1.27DSA(71)

Pin header straight type (without mounting holes)
HIF6A-**PA-1.27DSA(71)

Function Diagram

Function Diagram
Part Number
HIF6-20PA-1.27DS(71)
HIF6-20PA-1.27DSA(71)
HIF6-26PA-1.27DS(71)
HIF6-26PA-1.27DSA(71)
HIF6-32PA-1.27DS(71)
HIF6-32PA-1.27DSA(71)
HIF6-34PA-1.27DS(71)
HIF6-34PA-1.27DSA(71)
HIF6-40PA-1.27DS(71)
HIF6-40PA-1.27DSA(71)
HIF6-50PA-1.27DS(71)
HIF6-50PA-1.27DSA(71)
HIF6-52PA-1.27DSA(71)
HIF6-60PA-1.27DS(71)
HIF6-60PA-1.27DSA(71)
HIF6-68PA-1.27DS(71)
HIF6-68PA-1.27DSA(71)
HIF6-80PA-1.27DS(71)
HIF6-80PA-1.27DSA(71)
HIF6-100PA-1.27DS(71)
HIF6-100PA-1.27DSA(71)
HIF6A-20DA-1.27DS(71)
HIF6A-20DA-1.27DSA(71)
HIF6A-20PA-1.27DS(71)
HIF6A-20PA-1.27DSA(71)
HIF6A-26DA-1.27DSA(71)
HIF6A-26PA-1.27DS(71)
HIF6A-26PA-1.27DSA(71)
HIF6A-32PA-1.27DS(71)
HIF6A-32PA-1.27DSA(71)
HIF6A-34DA-1.27DS(71)
HIF6A-34PA-1.27DS(71)
HIF6A-34PA-1.27DSA(71)
HIF6A-40DA-1.27DS(71)
HIF6A-40DA-1.27DSA(71)
HIF6A-40PA-1.27DS(71)
HIF6A-40PA-1.27DSA(71)
HIF6A-50DA-1.27DS(71)
HIF6A-50DA-1.27DSA(71)
HIF6A-50PA-1.27DS(71)
HIF6A-50PA-1.27DSA(71)
HIF6A-52DA-1.27DSA(71)
HIF6A-52PA-1.27DS(71)
HIF6A-60DA-1.27DS(71)
HIF6A-60DA-1.27DSA(71)
HIF6A-60PA-1.27DS(71)
HIF6A-60PA-1.27DSA(71)
HIF6A-68DA-1.27DS(71)
HIF6A-68DA-1.27DSA(71)
HIF6A-68PA-1.27DS(71)
HIF6A-68PA-1.27DSA(71)
HIF6A-80DA-1.27DS(71)
HIF6A-80DA-1.27DSA(71)
HIF6A-80PA-1.27DS(71)
HIF6A-80PA-1.27DSA(71)
HIF6A-100PA-1.27DSA(71)
HIF6B-20DA-1.27DS(71)
HIF6B-26PA-1.27DSA(71)
HIF6B-40PA-1.27DSA(71)
HIF6B-50PA-1.27DSA(71)
Part NumberVolume DiscountDays to ShipRoHSConnector series initials Applicable pin/contact Number Of Cores Connector Type Connection direction Product Category Specifications Operating Temperature Range
(°C)
Terminal pitch
(mm)
3 Day(s) or more -G·H·IMale20For PCBAnglePin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale20For PCBStraightPin HeaderWith Lock-55 to +852.54
2 Day(s) or more 10G·H·IMale26For PCBAnglePin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale26For PCBStraightPin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale32For PCBAnglePin HeaderWith Lock-55 to +852.54
2 Day(s) or more 10G·H·IMale32For PCBStraightPin HeaderWith Lock-55 to +852.54
2 Day(s) or more 10G·H·IMale34For PCBAnglePin HeaderWith Lock-55 to +852.54
2 Day(s) or more 10G·H·IMale34For PCBStraightPin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale40For PCBAnglePin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale40For PCBStraightPin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale50For PCBAnglePin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale50For PCBStraightPin HeaderWith Lock-55 to +852.54
2 Day(s) or more 10G·H·IMale52For PCBStraightPin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale60For PCBAnglePin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale60For PCBStraightPin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale68For PCBAnglePin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale68For PCBStraightPin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale80For PCBAnglePin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale80For PCBStraightPin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale100For PCBAnglePin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IMale100For PCBStraightPin HeaderWith Lock-55 to +852.54
3 Day(s) or more -G·H·IFemale20Board-to-BoardAngleReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IFemale20Board-to-BoardStraightReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale20For PCBAnglePin HeaderNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale20For PCBStraightPin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IFemale26Board-to-BoardStraightReceptacleNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IMale26For PCBAnglePin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IMale26For PCBStraightPin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IMale32For PCBAnglePin HeaderNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale32For PCBStraightPin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IFemale34Board-to-BoardAngleReceptacleNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IMale34For PCBAnglePin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IMale34For PCBStraightPin HeaderNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IFemale40Board-to-BoardAngleReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IFemale40Board-to-BoardStraightReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale40For PCBAnglePin HeaderNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale40For PCBStraightPin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IFemale50Board-to-BoardAngleReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IFemale50Board-to-BoardStraightReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale50For PCBAnglePin HeaderNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale50For PCBStraightPin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IFemale52Board-to-BoardStraightReceptacleNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IMale52For PCBAnglePin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IFemale60Board-to-BoardAngleReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IFemale60Board-to-BoardStraightReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale60For PCBAnglePin HeaderNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale60For PCBStraightPin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more -G·H·IFemale68Board-to-BoardAngleReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IFemale68Board-to-BoardStraightReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale68For PCBAnglePin HeaderNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale68For PCBStraightPin HeaderNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IFemale80Board-to-BoardAngleReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IFemale80Board-to-BoardStraightReceptacleNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale80For PCBAnglePin HeaderNo circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale80For PCBStraightPin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IMale100For PCBStraightPin HeaderNo circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IFemale20Board-to-BoardAngleReceptacleWith circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IMale26For PCBStraightPin HeaderWith circuit board mounting holes-55 to +852.54
3 Day(s) or more -G·H·IMale40For PCBStraightPin HeaderWith circuit board mounting holes-55 to +852.54
2 Day(s) or more 10G·H·IMale50For PCBStraightPin HeaderWith circuit board mounting holes-55 to +852.54

Loading...

Basic Information

Connector Shape Rectangular G·H·I HIF Rated Current(A) 0.5
Allowable Voltage(V) AC125 Wiring Method Circuit Board Mounting (DIP) Plating of part touching terminal Gold
Contact Pitch(mm) 1.27

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)