2.54-mm Pitch Low Profile Connector, HIF3FB and HIF3FC Series
Caution
Product Description
A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.
[Features]
・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.
・Low profile: pin heads are at a low height of 9.2 mm.
・The space between circuit boards when stacking is 12.2 mm.
2.54‑mm Pitch Rectangular Connector With Flux Prevention Measures
Low-profile pin header with a height of just 9.2 mm.
Specifications for HIF3FC Series 2.54 mm Low-Profile Connectors
| Product Information | |
|---|---|
| Product Name | HIF3FB-10DA-2.54DSA(71) |
| HRS No. | 6160201771 |
| Basic Performance | |
|---|---|
| Connector Type | Receptacle |
| Opening Pitch | 2.54 mm |
| Mounting Pitch | 2.54 mm |
| Mating Height | 9.5 mm |
| Number of Contacts | 10 |
| Number of Matings and Un-Matings | 500 |
| Board Mounting Method | Through-hole DIP |
| Opening Direction | Straight |
| Contact Plating | Gold |
| Rated Current | 1 A |
| Rated Voltage (AC) | 200 V AC |
| Operating Temperature Range | -55 to 85°C |
| Mechanical Performance | |
|---|---|
| Plating Thickness | 0.2 µm |
| Housing color | Black |
| Solder wicking prevention mechanism | N/A |
| Electrical Specifications | |
|---|---|
| Withstand Voltage | 650 V max. |
| Contact resistance | 15 mΩ max. |
| Product Size | |
|---|---|
| Main Body Length (Pitch Direction) | 17.27 mm |
| Main Body Width (Depth) | 6 mm |
| Main Body Height | 9.5 mm |
Main Features of This Product
Product Standards
| Rating | Rated current: 1 A Rated voltage: 200 V AC | Operating temperature range: -55 to +85°C (Note 1) Operating humidity range: 40 to 80% | Storage temperature range -10 to +60°C (Note 2) Storage humidity range 40 to 70% (Note 2) |
|---|---|---|---|
| Item | Standard | Conditions |
|---|---|---|
| 1. Insulation resistance | 1,000 MΩ or more | Measure at 500 V DC |
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown. | Energize at 650 V AC rms for 1 min. |
| 3. Contact resistance | 15 mΩ or less | Measure at 0.1 A |
| 4. Vibration resistance | There shall be no electrical discontinuity for 1 μs or greater. | 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours |
| 5. Humidity resistance | Insulation resistance: 1,000 MΩ or more | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours |
| 6. Temperature cycle | There shall be no cracking or abnormalities with any of the parts. | (-55°C: 30 mins. > 15 to 35°C: Max. 5 mins. > 85°C: 30 mins. > 15 to 35°C: Max. 5 mins.) 5 cycles |
| 7. Durability (Mating / Un-mating) | Contact resistance: 15 mΩ or less | 500 times |
| 8. Solder heat resistance | No melting of resin parts affecting performance. | Solder bath: 260°C for 10 seconds |
| Manual solder: Soldering iron temperature of 350°C for 3 seconds |
(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
(Note 3) Information contained in this catalog represents general requirements for this product series.
Materials and Processing
| Part Name | Materials | Finish | Note | |
|---|---|---|---|---|
| Insulator | PBT resin | Black | UL94V-0 | |
| Contacts | Pin header | Brass | Contacts: 0.2‑μm gold-plating DIP: 2‑μm pure tin-plating | - |
| Receptacle | Copper alloy | |||