3A Compatible Ribbon Cable Connector, HIF4 Series

Brand :

HIROSE ELECTRIC

Caution

Product Description

Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.

[Features]
· Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.
· With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.
· With an automatic extraction lever with lock release, an extraction tool is not required.
· Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).

3‑A Compatible Ribbon Cable Connector

HIF4 Series

Specifications of HIF4 Series 3‑A Compatible Ribbon Cable Connector

Product Standards

Rating	Rated current: 3 A Rated voltage: 300 V AC	Operating temperature range: -55 to +85°C (Note 1) Operating humidity range: 40 to 80%	Storage temperature range -10 to +60°C (Note 2) Storage humidity range 40 to 70% (Note 2)

Item	Standard	Conditions
1. Insulation resistance	1,000 MΩ or more	Measure at 500 V DC
2. Withstand voltage	There shall be no flashover or dielectric breakdown.	Energize at 1,000 V AC r.m.s for 1 min.
3. Contact resistance	15 mΩ or less	Measure at 0.1 A
4. Vibration resistance	There shall be no electrical discontinuity for 1 μs or greater.	10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours
5. Humidity resistance	Insulation resistance: 1,000 MΩ or more	Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours
6. Temperature cycle	There shall be no cracking or abnormalities with any of the parts.	(-65°C: 30 mins. > 15 to 35°C: Max. 5 mins. > 125°C: 30 mins. > 15 to 35°C: Max. 5 mins.) 5 cycles
7. Durability (Mating / Un-mating)	Contact resistance: 15 mΩ or less	500 times
8. Solder heat resistance	No melting of resin parts affecting performance.	Solder bath: 260°C for 10 seconds
8. Solder heat resistance	No melting of resin parts affecting performance.	Manual solder: Soldering iron temperature of 360°C for 5 seconds

(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
(Note 3) Information contained in this catalog represents general requirements for this product series. Contact us for the drawings and specifications for a specific part number shown.
(Note 4) Be aware that lock deformation may occur if an excessive load is placed on the inside of the lock.

Materials

Part Name		Materials	Finish	Note
Insulator		PBT resin	Black	UL94V-0
Contacts	Socket	Beryllium copper	Nickel plating + gold plating	-
Contacts	Pin header	Phosphor bronze	Nickel plating + gold plating	-