D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile), FDD Series

D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile), FDD Series

A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.

[Features]
• Metal shell makes it compact and sturdy.
• Connectors can be mounted on the chassis, or on the front or back sides of the panel.
• Height of the wiring side is greatly reduced to facilitate more compact sets.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
• Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
• Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

PDF

Japanese Only

Rectangular Connector For Ribbon Cable

Small and durable metal shell

Small and durable metal shell

ItemStandard Value
Operating Temperature Range-55 to +85°C
Current Capacity1 A
Rated voltage200 V AC
Insulation resistance1,000 MΩ or more at 500 V DC
Contact resistance25 mΩ or less at 100 mA DC
Withstand Voltage1 min. at 650 V AC r.m.s

Product Standards

Part NameMaterialsColor/Finish
ShellMild steelNickel plating
InsulatorPBT resin*Black
ContactsBeryllium copperNickel + selective gold plating

Materials/Processing

  • *UL94V-0

FD*D Series D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile) Outline Drawing and Dimensions

Male Connector

FDBD-25P(55)

FDBD-25P(55)

FDED-9P(55), FDAD-15P(55), FDBD-25P(55), FDCD-37P(55) dimensional drawing

FDED-9P(55), FDAD-15P(55), FDBD-25P(55), FDCD-37P(55) dimensional drawing

FDBD-25PF(55)

FDBD-25PF(55)

FDED-9PF(55), FDBD-25PF(55), FDCD-37PF(55) dimensional drawing

FDED-9PF(55), FDBD-25PF(55), FDCD-37PF(55) dimensional drawing

 

Units: mm

 

Product No.HRS No.Number of ContactsABCDEFGHIJ
FDED-9P(55)211-0444-4 55930.8116.924.9916.91919.285.991.215.672.7
FDAD-15P(55)211-0446-0 551539.1425.2433.3225.2727.227.55
FDBD-25P(55)211-0448-5 552553.0439.0147.043941.441.285.871.33.2
FDCD-37P(55)211-0450-7 553769.3255.4763.555.457.957.711.4

 

Units: mm

 

Product No.HRS No.Number of ContactsABCDEFGHIJ
FDED-9PF(55)211-0604-9 55930.8116.924.9916.919.019.285.991.215.672.7
FDBD-25PF(55)211-0606-4 552553.0439.0147.0439.041.441.285.871.33.2
FDCD-37PF(55)211-0607-7 553769.3255.4763.555.457.957.711.4

 

Female connector

FDBD-25S(55)

FDBD-25S(55)

FDED-9S(55), FDBD-25S(55), FDCD-37S(55) dimensional drawing

FDED-9S(55), FDBD-25S(55), FDCD-37S(55) dimensional drawing

 

Units: mm

 

Product No.HRS No.Number of ContactsABCDEFGHIJ
FDED-9S(55)211-0445-7 55930.8116.424.9916.91919.286.171.215.672.7
FDBD-25S(55)211-0449-8 552553.0438.347.043941.441.283.2
FDCD-37S(55)211-0451-0 553769.3254.7663.555.457.957.71

Connector Mounting Method and Mounting Dimensions

If installing connector from front of panel (front mounting)

Dimensional drawing for installing connector from front of panel (front mounting)

Dimensional drawing for installing connector from front of panel (front mounting)

Diagram showing fully mounted state

Diagram showing fully mounted state

 

Units: mm

 

Shell SizeA1B1
E24.9922
A33.3230.3
B47.0444
C63.560.5
  • *Because the connector is inserted from the front of the panel, a slight gap will remain with the panel when mounted.

 

If installing connector from rear of panel (rear mounting)

Dimensional drawing for installing connector from rear of panel (rear mounting)

Dimensional drawing for installing connector from rear of panel (rear mounting)

Diagram showing fully mounted state

Diagram showing fully mounted state

 

Units: mm

 

Shell SizeA2B2
E24.9920.2
A33.3228.6
B47.0442.5
C63.559.2
Part Number
FDAD-15P(55)
FDBD-25P(55)
FDBD-25PF(55)
FDBD-25S(55)
FDCD-37P(55)
FDCD-37S(55)
FDED-9P(55)
FDED-9PF(55)
FDED-9S(55)
Part NumberVolume DiscountDays to ShipRoHSConnector series initials Applicable pin/contact Number Of Cores Features Operating Temperature Range
(°C)
2 Day(s) or more 10D· E· FMale15NA-55 to +85
2 Day(s) or more 10D· E· FMale25NA-55 to +85
2 Day(s) or more 10D· E· FMale25Shieldable machining-55 to +85
2 Day(s) or more 10D· E· FFemale25NA-55 to +85
2 Day(s) or more 10D· E· FMale37NA-55 to +85
2 Day(s) or more 10D· E· FFemale37NA-55 to +85
3 Day(s) or more -D· E· FMale9NA-55 to +85
2 Day(s) or more 10D· E· FMale9Shieldable machining-55 to +85
2 Day(s) or more 10D· E· FFemale9NA-55 to +85

Loading...

  1. 1

Basic Information

Connector Shape Rectangular D· E· F Dsub Connector Type Cable Connection
Rated Current(A) 1 Allowable Voltage(V) AC200 Wiring Method Pressure Welding
Connection direction Straight Plating of part touching terminal Nickel + partial gold Product Category Connector

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)